[How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9) +--- Thread: [How to do instruction] 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi (/showthread.php?tid=155) |
RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - officialsm - 02-13-2021 (02-13-2021, 10:23 AM)adrii Wrote: Hi officialsm fixed! Now it works. Thank you so much. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - adrii - 02-15-2021 Hi I have started developing mpd_oled again. As a first step I have changed the build system and and tried to make the install process easier and more portable. As part of this, I am also now providing a binary package for Moode. Before I release these changes, I would be grateful if someone could try installing the binary package and give me some feedback on the process and instructions (just a short note to let me know everything went well, or where there was a problem or a step wasn't clear. EDIT: THE TEST PERIOD HAS FINISHED, PLEASE DO NOT INSTALL ANYTHING USING THE FOLLOWING LINKS Instructions for Moode 7: https://github.com/antiprism/mpd_oled/blob/dev2/doc/install_moode7_deb.md Instructions for Moode 6: https://github.com/antiprism/mpd_oled/blob/dev2/doc/install_moode6_deb.md Please be aware that this is a test package. Do not install it on a Moode system where you cannot easily reinstall Moode. I have installed the package on a fresh copy of Moode, and on a fresh copy of Moode with the existing mpd_oled version already running on it, and the installation went fine. However, there may be some kind of setup that I have not anticipated and that will have some kind incompatibily with the install instructions or package Adrian. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - officialsm - 02-15-2021 (02-15-2021, 07:05 AM)adrii Wrote: Hi Hi Adrian, will change something about look and feel or infotmations visible on display? RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - adrii - 02-15-2021 Hi officialsm There are no display changes, and no improvements to the installed program. The only improvements are to the installation and configuration of mpd_oled. Adrian. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - officialsm - 02-15-2021 Is there a map or description to understand for each line of grapich equalizer how Hertz will corrispond? RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - adrii - 02-15-2021 Hi officialsm The spectrum is calculated by Cava, and I wasn't able to see exactly what the bars correspond to in the Cava project documentation https://github.com/karlstav/cava If you want to follow it up, the cava configuration file generated by mpd_oled looks something like Code: [general] Where the number of bars is set by 'mpd_oled -b' Adrian. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - fdealexa - 02-15-2021 (02-15-2021, 07:05 AM)adrii Wrote: Hi Hi Adrian, I have just tested your new procedure and everything has gone right. It is much more simple than the previous. I had no issues excluding a doubt: in the paragraph "Configure a copy of the playing audio for the spectrum display" there is a link to "test the display" that does not anything. Very good job, Adrian. Best regards and thanks from the community , Francesco RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - adrii - 02-16-2021 Hi Francesco Thanks for being the first person to try out the package, and for your feedback (I have now fixed the link). I feel happier releasing this knowing that someone else has successfully worked though the install instructions! Adrian. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - adrii - 02-22-2021 I have just pushed a major update to the mpd_oled repository to make the installation process easier. https://github.com/antiprism/mpd_oled/blob/master/README.md Please let me know about about any issues. There is no need to update an existing mpd_oled install as there are no new program features. Adrian. RE: 128x64 OLED with Song Status and Spectrum Display on Raspberry Pi - gabrielhssilva - 02-25-2021 Hello guys, I'm following the tutorial, but when I get to Copy the FIFO configuration file to /usr/local/etc/mpd_oled_fifo.conf it happens pi @ moode: ~ $ sudo cp /usr/local/share/mpd_oled/mpd_oled_fifo.conf /usr/local/etc/ cp: cannot stat '/usr/local/share/mpd_oled/mpd_oled_fifo.conf': No such file or directory I've followed the tutorial several times and I can't get it to work. I'm using a Raspberry Pi 4 and an i2c 4-pin SSD1306, could someone help me? |