+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: UPNP-Renderer not working - Allo Boss on RPi 3B+ (/showthread.php?tid=1601)
UPNP-Renderer not working - Allo Boss on RPi 3B+ - kosmonaut_75 - 08-11-2019
Hi,
I installed today Moode Audio 5.3 on my RPi 3B+ with an Allo Boss DAC. First of all, a great software!! With Orange Squeeze it works like a charm.
Unfortunately, the UPNP Renderer for MPD does not work properly. I can choose it as a renderer in BubbleUPNP on my Android phone but when starting a track nothing happens and the display says: "44,1 kHz - Stereo - Muted". Strangely enough the UPNP Renderer worked perfectly when I used Moode on my RPi without the Allo Boss DAC.
My Allo Boos DAC setup is:
- Driver Options: Slave enabled
- Alsa Volume 100 %
- Volume Control Software
- 0db analog gain
- 0db analog gain boost
My aim is to run Minim Server (on a NAS) as Music Server, Moode UPNP as Streamer and Renderer and BubbleUPNP as Control Point.
Do you have any ideas why UPNP Renderer does not work in my setup?
RE: UPNP-Renderer not working - Allo Boss on RPi 3B+ - kosmonaut_75 - 08-11-2019
Now, it is working: The solution was to deactivate squeezelite player in Audio settings. Too bad since I intendted to use squeelzelite player for a multiroom solution...
RE: UPNP-Renderer not working - Allo Boss on RPi 3B+ - Tim Curtis - 08-11-2019
I think Squeezelite has a param that releases the audio device after some timeout period. You would enter it in Squeezelite config, Other options.
https://ralph-irving.github.io/squeezelite.html