+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9)
+--- Thread: Bulk saving/loading user-defined radio stations (/showthread.php?tid=1618)
Bulk saving/loading user-defined radio stations - TheOldPresbyope - 08-14-2019
Those of us who regularly add user-defined radio stations to our moOde players know the pain of having to add them again to fresh installs.
I have written a pair of Python scripts to reduce this pain. They must be executed manually from the command line so the process isn't totally pain-free but it works for me
See my github repo for details.
The scripts have been tested only with moOde 5.3.1 and moOde 6.0.0 and work with both.
Regards,
Kent
RE: Bulk saving/loading user-defined radio stations - ghoeher - 08-14-2019
Hi Kent,
thanks a lot for creating and sharing the scripts - I'll test them as soon as possible (unfortunately most probably this will be next week earliest).
I tested the script and they work perfect for my needs. Migrated from 5.x to Moode 6.1 and imported my Radio channels within a few seconds
For all other settings, I just made a SQL dump from the database of the old system an so I was able to quickly redo my settings by comparing to the dump.
RE: Bulk saving/loading user-defined radio stations - Im bored - 08-21-2019
Not really sure what I'm doing wrong but I cant get your script to work
If I run python3 savemyradios.py all I get is an empty myradios.tar.gz
I also tired
chmod +x savemyradios.py
./savemyradios.py
with the same results.
Please check the attachment.
RE: Bulk saving/loading user-defined radio stations - Tim Curtis - 08-21-2019
What is the output from the command below?
Code:
sqlite3 /var/local/www/db/moode-sqlite3.db "select * from cfg_radio where type='u'";RE: Bulk saving/loading user-defined radio stations - TheOldPresbyope - 08-21-2019
@Im bored
The commandline output from the script is telling me that you have two user-defined radio stations in your moode-sqlite3.db database which don't have the required corresponding .pls file in the /var/lib/mpd/music/RADIO/ directory.
Further, the names of the two stations are names for the stations I created for my example myradios.tar.gz file so would not be expected to be in your database to start with.
Could it be you tried to run the loadmyradios.py script first? The example file contains all three elements---database entry, .pls file, .jpg files---for each station so it should not have left your system in the state it seems to be in. If you ran it, did the script fail somehow? If so, what was the output?
Regards,
Kent
RE: Bulk saving/loading user-defined radio stations - Im bored - 08-21-2019
(08-21-2019, 07:50 PM)Tim Curtis Wrote: What is the output from the command below?
Code:sqlite3 /var/local/www/db/moode-sqlite3.db "select * from cfg_radio where type='u'";
login as: pi
pi@192.168.1.49's password:
Kernel 4.19.66-v7+, Raspbian 10.0, moOde 6.1.0
____ __
__ _ ___ / __ \___/ /__
/ ' \/ _ \/ /_/ / _ / -_)
/_/_/_/\___/\____/\_,_/\__/
moOde audio player
© 2014 Tim Curtis
The programs included with Moode are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright.
Moode comes with absolutely no warranties expressed or
implied, or any other guarantees.
Last login: Wed Aug 21 11:37:46 2019 from 192.168.1.5
pi@OutdoorSpeakers:~ $ sqlite3 /var/local/www/db/moode-sqlite3.db "select * from cfg_radio where type='u'";
500|https://archive.org/download/gd68-02-14.sbd.kaplan.15640.sbeok.shnf/gd68-02-14.sbd.kaplan.15640.sbeok.shnf_vbr.m3u|Grateful Dead Live at Carousel Ballroom - 1968|u|local
501|http://mangoradio.stream.laut.fm/mangoradio?t302=2019-08-11_17-26-44&uuid= f5df91b3-0dbd-4169-9dae-ed43ed409bbf|MANGORADIO|u|local
RE: Bulk saving/loading user-defined radio stations - Im bored - 08-21-2019
(08-21-2019, 08:28 PM)TheOldPresbyope Wrote: @Im bored
The commandline output from the script is telling me that you have two user-defined radio stations in your moode-sqlite3.db database which don't have the required corresponding .pls file in the /var/lib/mpd/music/RADIO/ directory.
Further, the names of the two stations are names for the stations I created for my example myradios.tar.gz file so would not be expected to be in your database to start with.
Could it be you tried to run the loadmyradios.py script first? The example file contains all three elements---database entry, .pls file, .jpg files---for each station so it should not have left your system in the state it seems to be in. If you ran it, did the script fail somehow? If so, what was the output?
Regards,
Kent
This are the steps taken:
1. Update to 6.10 via ISO
2. go through and setup manually
3. manually add radio stations and images
Run
4. git clone https://github.com/TheOldPresbyope/moode-radio-utils.git
5. cd moode-radio-utils
Run
6. python3 savemyradios.py
7. Download and check myradios.tar.gz inside of that file was two radio stations. (the test ones)
Run
8. sudo python3 loadmyradios.py (to test to see if the script works)
Yes it worked, it wiped out my radio stations and replaced only with 2 test radio stations.
9. Manually replace my radio stations again
Run
10. python3 savemyradios.py
And at this point it backs up no radio stations
I attached a list of my radio stations just to show whats currently in there, And that's what I'm trying to backup
RE: Bulk saving/loading user-defined radio stations - Tim Curtis - 08-21-2019
When you manually add your stations do you also update the cfg_radio table?
RE: Bulk saving/loading user-defined radio stations - Im bored - 08-21-2019
(08-21-2019, 09:19 PM)Tim Curtis Wrote: When you manually add your stations do you also update the cfg_radio table?
When I manually add radio stations I update them in the interface by pressing the refresh buttons.
And If that doesn't work I go to config and Update MPD database.
Is that what you mean?
RE: Bulk saving/loading user-defined radio stations - TheOldPresbyope - 08-21-2019
@Im bored
I'm a bit lost here.
You said:
Quote:1. Update to 6.10 via ISO
2. go through and setup manually
3. manually add radio stations and images
What exactly did you do in step 3?
For each station, did you use the "+" icon in the Radio Directory to open the "New Station" popup and in it enter your station name, URL, Logo, and then hit the "Create" button? This creates the database entry and the .pls file and copies in the .jpg files.
The "Refresh" button does not enter stations but it does scan the .pls file directory. If you've added your own .pls files to the /var/lib/mpd/music/RADIO directoy and .jpg files to the /var/www/images/radio-logos and ../thumbs directories, then they will show up in the UI after the refresh. However, they will not automagically be entered into the database and my script will not know of their existence. That's spelled out in the comment block at the head of each script.
I don't understand also why you did all this on one moOde player. The point is to be able to save stations which have been created on one player and load them onto others.
As an aside, I can see I made a mistake adding my example tar file. I'll have to modify the repo to hide it in a subdirectory to avoid unnecessary confusion. Also, I need to check savemyradios.py to make sure it doesn't create a tar file if it will be empty.
Regards,
Kent