+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [How to do instruction] Set Startup volume ? (/showthread.php?tid=175)
Pages:
1
2
Set Startup volume ? - antipiot - 05-13-2018
Hello everybody!
Trying Moode Audio after having used Runeaudio and Volumio for a while:
Using latest Moode Relase on Pi3B with an Iqaudio DAC + Works very well so far :-)
I'm trying to set-up an automatic volume value at startup but didnt found any option in Moode Audio, have i missed something somewhere? If not, is there a way to achieve this?
Actually, the volume at reboot is the same as when shutdown.
Looking forward foy your help :-)
RE: Set Startup volume ? - Tim Curtis - 05-13-2018
There is no setting for this.
Whats the usage scenario where a specific volume is needed after reboot?
-Tim
RE: Set Startup volume ? - antipiot - 05-13-2018
(05-13-2018, 12:43 PM)Tim Curtis Wrote: There is no setting for this.
Whats the usage scenario where a specific volume is needed after reboot?
-Tim
Hello Sir,
Thanks for you answer :-)
i need this because the Amp where my Moode audio player is connected has a computer connected at it aswell and has a "fixed" volume.
I only use windows or moodeaudio volume rockers to fit my needs in a certain volume range. i avoid using the volume from the amp because i need another remote :-(
If Moodaudio start then auto play at 100% volume, it wiil be too loud for my daily listening :-)
Idea is:
if i'm listening at loud volume on volumio, then shut it down, i'd appreciate if, when restarted, the volume was set do a default boot value that is a daily use volume.
for information purpose, Volumio and Runaudio both had this option.
Hope my explanations are clear enough.
If i can help you in any way, dont hesitate asking me :-)
(sorry for my english
)
RE: Set Startup volume ? - Tim Curtis - 05-13-2018
If I get more requests for this I can add to the TODO list.
If you want to try a workaround then just set your desired volume level in the restart.sh script. I used the value 50 in the example below.
sudo nano /var/local/www/commandw/restart.sh
Add the following line of code after 'mpc stop' in the "reboot" and "power off" code blocks.
/var/www/vol.sh 50
-Tim
RE: Set Startup volume ? - psychofaktory - 05-14-2018
I have a question regarding to startup volume. I think I have the opposite problem.
I use Moode (4.1) with a HifiBerry DAC+ with volume-control set to hardware as UPnP-renderer. If I hear music, lets say with volume set to "40", restart Moode sometimes the volume ist set back to "26".
I would prefer to have the last used volume on startup.
Is this a known behaviour?
RE: Set Startup volume ? - Tim Curtis - 05-14-2018
Try enabling UPnP volume sync, then reboot. This should cause moOde volume knob to sync up with volume changes made on UPnP control point.
Enable UPnP vol sync
Code:
sqlite3 /var/local/www/db/moode-sqlite3.db "UPDATE cfg_system SET value='1534' WHERE param='feat_bitmask'"Disable UPnP vol sync
Code:
sqlite3 /var/local/www/db/moode-sqlite3.db "UPDATE cfg_system SET value='510' WHERE param='feat_bitmask'"-Tim
RE: Set Startup volume ? - antipiot - 05-14-2018
(05-13-2018, 09:07 PM)Tim Curtis Wrote: If I get more requests for this I can add to the TODO list.
If you want to try a workaround then just set your desired volume level in the restart.sh script. I used the value 50 in the example below.
sudo nano /var/local/www/commandw/restart.sh
Add the following line of code after 'mpc stop' in the "reboot" and "power off" code blocks.
/var/www/vol.sh 50
-Tim
Hello Tim,
Worked perfectly.
Thanks for your help and clear instructions :-)
RE: Set Startup volume ? - psychofaktory - 03-16-2023
I have here two MoodeOS in version 8.1.2.
One on a Raspberry Pi 3 and one on a Raspberry Pi 4.
Both are configured identically. Each with a HifiBerry DAC+ and Volume control set to Hardware.
The media is transferred to the UPnP renderer via BubbleUPnP in each case.
I noticed that the initial volume on the Raspberry Pi 3 is always 20% after starting MoodeAudio. On the Raspberry Pi 4, however, it is always at 89%.
How does it come to the difference and how can the startup volume be set here.
The trick given here with /var/www/vol.sh 50 did not work here unfortunately.
And neither did enabling UPnP volume sync to restore the last set volume after a reboot of the system.
Independently of this, I also noticed on both systems that in BubbleUPnP the playlist of the previous session available in Moode is not displayed directly after a start of MoodeAudio. Only when a new element is added to the playlist via BubbleUPnP, the playlist appears.
Unfortunately, I do not know where exactly the error is to be found here.
RE: Set Startup volume ? - Tim Curtis - 03-16-2023
(03-16-2023, 07:35 PM)psychofaktory Wrote: I have here two MoodeOS in version 8.1.2.
One on a Raspberry Pi 3 and one on a Raspberry Pi 4.
Both are configured identically. Each with a HifiBerry DAC+ and Volume control set to Hardware.
The media is transferred to the UPnP renderer via BubbleUPnP in each case.
I noticed that the initial volume on the Raspberry Pi 3 is always 20% after starting MoodeAudio. On the Raspberry Pi 4, however, it is always at 89%.
How does it come to the difference and how can the startup volume be set here.
The trick given here with /var/www/vol.sh 50 did not work here unfortunately.
And neither did enabling UPnP volume sync to restore the last set volume after a reboot of the system.
Independently of this, I also noticed on both systems that in BubbleUPnP the playlist of the previous session available in Moode is not displayed directly after a start of MoodeAudio. Only when a new element is added to the playlist via BubbleUPnP, the playlist appears.
Unfortunately, I do not know where exactly the error is to be found here.
During moOde startup the volume is set based on the value of the knob.
RE: Set Startup volume ? - the_bertrum - 03-17-2023
(03-16-2023, 07:35 PM)psychofaktory Wrote: I have here two MoodeOS in version 8.1.2.
One on a Raspberry Pi 3 and one on a Raspberry Pi 4.
Both are configured identically. Each with a HifiBerry DAC+ and Volume control set to Hardware.
The media is transferred to the UPnP renderer via BubbleUPnP in each case.
I noticed that the initial volume on the Raspberry Pi 3 is always 20% after starting MoodeAudio. On the Raspberry Pi 4, however, it is always at 89%.
How does it come to the difference and how can the startup volume be set here.
The trick given here with /var/www/vol.sh 50 did not work here unfortunately.
And neither did enabling UPnP volume sync to restore the last set volume after a reboot of the system.
Independently of this, I also noticed on both systems that in BubbleUPnP the playlist of the previous session available in Moode is not displayed directly after a start of MoodeAudio. Only when a new element is added to the playlist via BubbleUPnP, the playlist appears.
Unfortunately, I do not know where exactly the error is to be found here.
This would probably be better answered using a fresh thread maybe?