![]() |
file for older installation - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: file for older installation (/showthread.php?tid=2070) Pages:
1
2
|
file for older installation - vikozo - 01-12-2020 Hello when i do download the newest version i got a file like rxxx-iso.zip if i wish to install a older version https://moodeaudio.org/docs/SOURCES.html there are 6 files now, which should i take? the moOde 5.3.1 Build Recipe v2.10 have a nice day vinc RE: file for older installation - Tim Curtis - 01-12-2020 The ISO images are hosted in moOde Git repo, releases. https://github.com/moode-player/moode RE: file for older installation - vikozo - 01-12-2020 Hello @Tim Curtis thanks for the fast feedback will try it - again with the older version... RE: file for older installation - vikozo - 01-13-2020 Strange Strange i can't install / run moode anymore also older version works not any more! when it boot it boots in WIFI AP mode - do a scan select ssid add password change country - save do a reboot! then it boots and fast i could ping the dhcp ip of the Pi! As soon it is ready there - i loos the ping ip paket. The Pi is back in AP Moode… Check the config the ssid and correct password are there! so just installed a Pi Debian lite, the connection is there and never lost again. also doing large update all without Problems. so what could be the reason MoodeAudio Always go back to AP Mode??? have a nice day vinc RE: file for older installation - vikozo - 01-14-2020 Hello would it possible to install moodeAudio on a Raspbian (Debian10)? Not using the image, but doing some apt install -y xxx (what would be needed) have a nice day vinc RE: file for older installation - TheOldPresbyope - 01-14-2020 (01-14-2020, 08:10 AM)vikozo Wrote: Hello moOde is built, not installed, on a fresh copy of Raspbian by following the multi-step build recipe. Regards, Kent RE: file for older installation - TheOldPresbyope - 01-14-2020 (01-13-2020, 11:25 AM)vikozo Wrote: Strange Strange Hi, vinc. I haven't looked at the networking part of the moOde codebase in a long time so I'm not going to speculate. How about giving some more details--- First, check that this is happening with a default moOde installation, e.g., with no changes except for configuring the network interface. Assuming it does, then when it reboots after making this change, does it stay in WiFi client mode long enough for you to see the Web UI? How do you ping the DHCP IP of the PI? By invoking "ping moode"? By default ping repeats at 1 second intervals. If you start pinging at the same time you reboot the player, you'll see a succession of "Host Unreachable" lines before it begins reporting successful pings. How many times does the ping succeed? Here's a snippet of the output when I ping a booting moOde player from a Linux laptop: Code: kreed@T520 ~ $ ping moodelr When moOde reverts to AP mode, SSH back in and have a look at the logs. In /var/log/moode.log you'll see initial entries like the following as it connects in WiFi client mode (where I have not turned off "wait for eth0 address" in System Config): Code: 20200114 072836 worker: -- Network Do you see any later lines in moode.log relating to the network interface? How about network-related entries in /var/log/syslog? Regards, Kent PS - unmodified Raspbian does not include the hostapd code and is not configured to use it so it can't exhibit the same behavior. RE: file for older installation - vikozo - 01-14-2020 @TheOldPresbyope Thanks for your feedback. I took the newest img i got - "install" it to my Raspberry Pi 3b+ i know the MAC Address my DHCP Server give allways the same IP Adresse to it! it start in a first step! - Login with my IPAD - go to network settings - do a ssid scan - select the ssid needed and add the password (Yes i am sure it is correct because it is simple) - i also change the country to Switzerland - i press save - it ask for a reboot - i do so - as soon it reboots i start pinging and after a while i got th respond below 7ms all the time - then when finish booting and loading Moodeaudio - the ping are lost from the PC i have - back to my IPAD i found the ssid moode do enter go to network setting - the information are still there - rescan reselect readd the password - ask for reboot i do so have a nice day vinc RE: file for older installation - vikozo - 01-14-2020 @TheOldPresbyope i will try it with this link moOde is built, not installed, on a fresh copy of Raspbian by following the multi-step build recipe. RE: file for older installation - TheOldPresbyope - 01-14-2020 (01-14-2020, 02:56 PM)vikozo Wrote: @TheOldPresbyope Are you sure you want/need to do this? It's a lot of work and once the build recipe is complete you have exactly the same moOde player as the one Tim distributes as an image file. If you have only an iPad available to communicate with the moOde player then reviewing the logs will be tedious. Your signature line says: Quote:Raspberry Pi3B+ --> HiFiBerry DAC+ PRO Are you trying to connect to the AP on the 2.4GHz band using the Pi's onboard WiFi transceiver? IIRC, there was a problem with signal interference from early HiFiBerry DAC+ Pro boards. It's possible that's an issue here. Simple test: remove the DAC and reboot. Is the connection now solid? Then the DAC is the problem. Possible mitigation strategies: change to a different DAC; connect on the 5GHz band; switch to an external USB-WiFi adapter, preferably on a USB extender cable to get it away from the DAC. Regards, Kent |