+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] Usbridge Signature upgraded Linux. (/showthread.php?tid=2620)
Usbridge Signature upgraded Linux. - redstone - 06-04-2020
Hi,
I had my Allo Usbridge signature working and i did something i should have thought about, i checked for an update on Moode System page and started the Feburary update. After rebooting the update created a fatal error and the player cannot log to the ethernet. - but BRIEFLY CONNECTS TO THE WIRELESS CONECTION before dropping. I will try tp post the bootup output. Unfortunately i didnt enable logging unless it is already configured?
Thanks redstone.
RE: Usbridge Signature upgraded Linux. - Tim Curtis - 06-05-2020
Just write a fresh 6.5.2 image to your SD Card. Theres full support for the SIG including it's enhanced Ethernet/USB controller.
RE: Usbridge Signature upgraded Linux. - redstone - 06-05-2020
(06-05-2020, 12:16 AM)Tim Curtis Wrote: Just write a fresh 6.5.2 image to your SD Card. Theres full support for the SIG including it's enhanced Ethernet/USB controller.
Ok thanks, i will do that. Im a ras pi novice. Are the directions in the startup guide?
Also i video the bootup , the last good line was “reached target sound card.”
then the first in the error stack is “Unable to handle kernel NULL pointer dereference at virtual address 00000128”
RE: Usbridge Signature upgraded Linux. - TheOldPresbyope - 06-05-2020
@redstone
The first step is to download the full 6.5.2 image from moodeaudio.org and flash it to your uSD card.
There's various ways to do this. I prefer using the Belena Etcher program, binaries available from https://www.balena.io/etcher/ for Windows, OS X, and Linux.
Everywhere you look on the InterWEB™ you'll find instructions for using this or other tools to flash the memory card for a Raspberry PI.
The Setup guide then takes you through the rest of the steps.
The error message you cite suggests there's a mismatch between the kernel and one of your drivers. Don't have a UsBridge Signature and won't conjecture how this happened during the upgrade (but I have thoughts!).
Good luck.
Regards,
Kent
RE: Usbridge Signature upgraded Linux. - redstone - 06-05-2020
(06-05-2020, 12:41 AM)TheOldPresbyope Wrote: @redstone
The first step is to download the full 6.5.2 image from moodeaudio.org and flash it to your uSD card.
There's various ways to do this. I prefer using the Belena Etcher program, binaries available from https://www.balena.io/etcher/ for Windows, OS X, and Linux.
Everywhere you look on the InterWEB™ you'll find instructions for using this or other tools to flash the memory card for a Raspberry PI.
The Setup guide then takes you through the rest of the steps.
The error message you cite suggests there's a mismatch between the kernel and one of your drivers. Don't have a UsBridge Signature and won't conjecture how this happened during the upgrade (but I have thoughts!).
Good luck.
Regards,
Kent
Hi Kent,
Seems you are right. I burned the 6.5.2 image and rebooted Eternet-connected only and it booted fine. However when I went added the wireless Comfast CF-912AC usb dongle it is throwing errors. This wifi dongle was supported in the December Moode release. I wonder if there is something that can be changed in the driver setup or maybe i need another wifi dongle?
RE: Usbridge Signature upgraded Linux. - TheOldPresbyope - 06-05-2020
@redstone
Just ten days ago @Tim Curtis posted in another thread, "Comfast CF-912AC dual-band WiFi adapter works perfectly with the SIG. The driver for it is included with every moOde release. You also might want to get a 90 deg USB extender."
Maybe he's got some insight here.
Regards,
Kent
RE: Usbridge Signature upgraded Linux. - Tim Curtis - 06-05-2020
What does "throwing errors" mean?
RE: Usbridge Signature upgraded Linux. - redstone - 06-05-2020
(06-05-2020, 02:12 AM)Tim Curtis Wrote: What does "throwing errors" mean?
I am able to boot up fine with the ethernet. I ran ifconfig and got this:
pi@moode:~ $ ifconfig
eth0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.1.14 netmask 255.255.255.0 broadcast 192.168.1.255
inet6 fe80::99f1:13ba:f3ef:d71d prefixlen 64 scopeid 0x20<link>
ether 00:17:f7:00:a9:fe txqueuelen 1000 (Ethernet)
RX packets 10944 bytes 1543465 (1.4 MiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 2359 bytes 2046589 (1.9 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 1000 (Local Loopback)
RX packets 523 bytes 73338 (71.6 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 523 bytes 73338 (71.6 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 uns 0 carrier 0 collisions 0
lo:After I plug in the COMFAST WifI dongle I have this error and Moode freezes - GuI is unresponsive and the SSH also unresponsive.
pi@moode:~ $
Message from syslogd@moode at Jun 5 13:51:36 ...
kernel:[16437.748466] Internal error: Oops: 17 [#1] SMP ARM
I turned debug on in system.
Thanks,
redstone
RE: Usbridge Signature upgraded Linux. - redstone - 06-06-2020
Ok I am going back to 6.4.0 image since this used to work.
Anyone know where i can get the 6.4.0.iso image? Is this in the 6.4.0 sources folder?
RE: Usbridge Signature upgraded Linux. - redstone - 06-06-2020
Ok got it working.
I am on 6.5.2 now and i was able to get it working. First i disconnected my D90 Topping Dac. I then added the Comfast wifi Dongle. I had to make the wifi channel unsecured without a password. So not sure if there is a problem withe the password encryption or security of the wifi channel that was causing a problem.