+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] USB Device Type: Nothing to Select (/showthread.php?tid=2778)
USB Device Type: Nothing to Select - Desmond88 - 07-16-2020
With the help from this forum, I have successfully installed Moode Player.
In the course of configuration, i encountered two issues:
(1) Pi 4 (8 GB) Ram won't boot if it is not connected to my TV via hdmi irregards on whether the Local UI display is turned on/off.
Anyway to boot Moode player without having to connect it to my TV?
(2) I intended to output the audio signal from Moode player to Wadia DI122 via Usb cable but the USB Device Type was showing Nothing to select.
I managed to did it once having the Usb ouput displayed and connected but next day it was disconnected and displayed Nothing to select. I have rebooted it several times including changing the Usb but the problem still persists.
I have read somewhere, it quoted:
"The USB-problem concerning the Raspberry Pi 4GB RAM model might be due to the issue seen earlier that using more RAM than 3072 MB breaks the USB: Kernal Issue"
Is this the potential cause and how to resolve it?
RE: USB Device Type: Nothing to Select - DRONE7 - 07-16-2020
(07-16-2020, 06:22 AM)Desmond88 Wrote: With the help from this forum, I have successfully installed Moode Player.
In the course of configuration, i encountered two issues:
(1) Pi 4 (8 GB) Ram won't boot if it is not connected to my TV via hdmi irregards on whether the Local UI display is turned on/off.
Anyway to boot Moode player without having to connect it to my TV?
(2) I intended to output the audio signal from Moode player to Wadia DI122 via Usb cable but the USB Device Type was showing Nothing to select.
I managed to did it once having the Usb ouput displayed and connected but next day it was disconnected and displayed Nothing to select. I have rebooted it several times including changing the Usb but the problem still persists.
I have read somewhere, it quoted:
"The USB-problem concerning the Raspberry Pi 4GB RAM model might be due to the issue seen earlier that using more RAM than 3072 MB breaks the USB: Kernal Issue"
Is this the potential cause and how to resolve it?
The Raspberry Pi foundation changed the card numbering for the Raspberry Pi4 and its 2 HDMI outputs in the latest Raspbian/Raspberry OS.
This has caused some unexpected and unforeseen hiccoughs and there will be a fix in the next Moode in place update 6.6.1
Meantime Moode can either work with an HDMI screen or a USB DAC but not both...
Be patient...
it is being worked on. 
(I would not put much store on a random internet quote...especially when they couldn't even spell "kernel" correctly...lol.)
RE: USB Device Type: Nothing to Select - TheOldPresbyope - 07-16-2020
@Desmond88
Quote:(1) Pi 4 (8 GB) Ram won't boot if it is not connected to my TV via hdmi irregards on whether the Local UI display is turned on/off.
Anyway to boot Moode player without having to connect it to my TV?
Every model RPi I own from RPi Zero W to RPi 4B 4GB boots standalone into moOde.
I don't own an 8GB version so have no way to repro your issue. It's abnormal, for sure. I know there were some hardware changes with this version which required yet another update to the firmware but I should have thought they've been baked into the Raspbian release we're working with.
Can anyone else confirm if 1) moOde 6.5.2 and 2) moOde 6.6.0 boot on this board? Was a firmware update required with either?
Regards,
Kent
RE: USB Device Type: Nothing to Select - Desmond88 - 07-17-2020
Hi Guys,
Thank you for the prompt response.
The above are the issues that I encountered after installing moode 6.6.0 on my Pi4 (8gb ram).
Regards,
Regards,
RE: USB Device Type: Nothing to Select - Desmond88 - 07-22-2020
Dear all,
All issues solved with the latest moode 6.7.0.
Thank you so much for all the helping hands.