+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: No more sound... (/showthread.php?tid=3123)
No more sound... - gorgonetriton - 11-01-2020
Hi everyone,
I use moode with a usbridge player connected to a smsl usb dac, everything was working perfectly until I plugged it back in and unplugged it to change a cable.
Moode recognizes my library, starts playback without any error message, a slight sound is even heard in the speaker but nothing else, total silence.
I tested the dac usb input with another source, no problem, I quickly looked at the Moode configuration menus, nothing caught my attention but I must say that I'm really a computer novice.
![[Image: Screenshot-2020-11-01-mo-Ode-Player.png]](https://i.ibb.co/vsRcb72/Screenshot-2020-11-01-mo-Ode-Player.png)
![[Image: Screenshot-2020-11-01-mo-Ode-Player-1.png]](https://i.ibb.co/JQ5knhd/Screenshot-2020-11-01-mo-Ode-Player-1.png)
Code:
S Y S T E M P A R A M E T E R SCode:
moOde release = 6.4.2 2020-02-12
Raspbian OS = 10.2
Linux kernel = 4.19.97-v7+ #1293
Platform = Allo USBridge SIG [CM3+ Lite 1GB v1.0]
Architecture = armv7l (32-bit)
System uptime = up 15 minutes
Timezone = Europe/Paris
Current time = 2020-11-01 19:57:41
Host name = moode
Ethernet address = 192.168.1.26
Ethernet MAC = 00:17:f7:00:aa:4e
WLAN address = unassigned
WLAN MAC = no adapter
WLAN country = US
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = not available
Warranty = OK
Root size = 3.4G
Root used = 79%
Root available = 686M
Root expand = not expanded
Memory free = 672 MB
Memory used = 86 MB
SoC temperature = 48.3°C
CPU governor = ondemand
Onboard WiFi = None
Onboard BT = None
HDMI output = On
Eth addr wait = On
Max USB current = Off
USB (UAC2) fix = Off
Pi-3B+ eth fix = Off
SSH term server = On
PHP-FPM version = 7.3.11
NGINX version = 1.14.2
SQLite3 version = 3.27.2
Hostapd version = 2.8-devel
WiringPi version = 2.50
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = USB audio device
Interface = USB
Mixer name = SMSL USB AUDIO
Hardware volume = Controller detected
Max ALSA volume =
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 49
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.1.8-1+rpt1
SoX version = 0.1.2-3
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
UPnP browser = Off
Auto-shuffle = Off
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Boom
MPD httpd = Off
A P P E A R A N C E S E T T I N G S
Theme = Default
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = Yes
Cover blur = 30px
Cover scale = 1.0
CoverView auto-display = Never
CoverView style = Animated
Auto-shuffle filter = None
Extra metadata = Yes
Playback history = No
L I B R A R Y S E T T I N G S
Instant play action = Clear/Play
Show genres column = No
Album grouping = by Year
Compilation identifier = Various Artists
Recently added = 1 Month
Ignore articles = a,an,the
UTF8 character filter = No
Hi-res thumbs = Auto
Cover search pri = Cover image file
Pixel ratio = 1
M P D S E T T I N G S
Version = 0.21.16
Volume control = software
ALSA device = hw:1
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = No
Audio buffer = 4096 (kb)
Output buffer size = 131072 (kb)
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.50
Bluealsa ver = 2.0.0
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (µs)
A I R P L A Y S E T T I N G S
Version = 3.3.5
Friendly name = Moode Airplay
ALSA device = alsaequal
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = alsaequal
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20201101 194238 worker: -- Start
20201101 194238 worker: Successfully daemonized
20201101 194238 worker: Integrity check (passed)
20201101 194238 worker: Session loaded
20201101 194238 worker: Debug logging (on)
20201101 194238 worker: Device raw: (0:ALSA|1:AUDIO|i2s:none)
20201101 194238 worker: Device cfg: (USB audio device|1|1|SMSL USB AUDIO |0)
20201101 194238 worker: ALSA volume set to (0%)
20201101 194239 worker: -- System
20201101 194241 worker: Host name (moode)
20201101 194241 worker: moOde release (6.4.2 2020-02-12)
20201101 194241 worker: Raspbian OS (10.2)
20201101 194241 worker: Linux kernel (4.19.97-v7+ #1293)
20201101 194241 worker: Platform (Allo USBridge SIG [CM3+ Lite 1GB v1.0])
20201101 194241 worker: Architecture (armv7l)
20201101 194241 worker: MPD version (0.21.16)
20201101 194241 worker: CPU governor (ondemand)
20201101 194241 worker: USB boot not available
20201101 194241 worker: File system not expanded yet
20201101 194241 worker: HDMI port on
20201101 194242 worker: File check (OK)
20201101 194242 worker: -- Network
20201101 194242 worker: eth0 exists
20201101 194242 worker: IP addr (192.168.1.26)
20201101 194242 worker: Netmask (255.255.255.0)
20201101 194242 worker: Gateway (192.168.1.1)
20201101 194242 worker: Pri DNS (192.168.1.1)
20201101 194242 worker: Domain (home)
20201101 194242 worker: wlan0 does not exist
20201101 194242 worker: -- Audio
20201101 194243 worker: ALSA outputs unmuted
20201101 194243 worker: ALSA card number (1)
20201101 194243 worker: Audio output (USB audio device)
20201101 194243 worker: Audio formats (S32_LE, SPECIAL, DSD_U32_BE)
20201101 194243 worker: ALSA mixer name (SMSL USB AUDIO )
20201101 194243 worker: MPD volume control (software)
20201101 194243 worker: Hdwr volume controller exists
20201101 194243 worker: Max ALSA volume (%)
20201101 194243 worker: -- Services
20201101 194243 worker: Reset renderer active state
20201101 194244 worker: MPD conf updated
20201101 194244 worker: MPD started
20201101 194244 openMpdSocket(): connection failed (1)
20201101 194244 openMpdSocket(): errorno: 111, Connection refused
20201101 194244 worker: MPD accepting connections
20201101 194244 worker: Configure MPD outputs
20201101 194245 worker: MPD output 1 ALSA default (off)
20201101 194245 worker: MPD output 2 ALSA crossfeed (off)
20201101 194245 worker: MPD output 3 ALSA parametric eq (off)
20201101 194245 worker: MPD output 4 ALSA graphic eq (on)
20201101 194245 worker: MPD output 5 ALSA polarity inversion (off)
20201101 194245 worker: MPD output 6 ALSA bluetooth (off)
20201101 194245 worker: MPD output 7 HTTP stream (off)
20201101 194245 worker: MPD crossfade (off)
20201101 194245 worker: Audio source (Local)
20201101 194245 worker: Output device (Local)
20201101 194245 worker: Shellinabox SSH started
20201101 194245 worker: USB auto-mounter (udisks-glue)
20201101 194245 worker: -- Music sources
20201101 194245 worker: USB source (125C-3C6E)
20201101 194246 sourceMount(): result=()
20201101 194246 worker: NAS and UPnP sources (mountall initiated)
20201101 194246 worker: -- Miscellaneous
20201101 194246 worker: Saved MPD vol level (0)
20201101 194246 worker: Preamp volume level (0)
20201101 194246 worker: MPD volume level (49) restored
20201101 194246 worker: ALSA volume level (0%)
20201101 194246 worker: Auto-play (Off)
20201101 194246 worker: Auto-shuffle service (Off)
20201101 194246 worker: Maintenance interval (3 hrs)
20201101 194246 worker: Screen saver activation (Never)
20201101 194246 worker: Session permissions (OK)
20201101 194246 worker: Watchdog started
20201101 194246 worker: Ready
20201101 194312 waitWorker(): Start (snd-config, w_active=0)
20201101 194312 waitWorker(): End (snd-config, w_active=0)
20201101 194313 enhanceMetadata(): coverurl: (/coverart.php/USB%2F125C-3C6E%2F01.%20Bum%20Bum%20Bum.flac)
20201101 194313 enhanceMetadata(): Song file
20201101 194313 engine-mpd: Metadata returned to client: Size=(29)
20201101 194315 waitWorker(): Start (snd-config, w_active=0)
20201101 194315 waitWorker(): End (snd-config, w_active=0)
20201101 194316 enhanceMetadata(): coverurl: (/coverart.php/USB%2F125C-3C6E%2F01.%20Bum%20Bum%20Bum.flac)
20201101 194316 enhanceMetadata(): Song file
20201101 194316 engine-mpd: Metadata returned to client: Size=(29)
20201101 194319 waitWorker(): Start (sys-config, w_active=0)
20201101 194319 waitWorker(): End (sys-config, w_active=0)
20201101 194320 enhanceMetadata(): coverurl: (/coverart.php/USB%2F125C-3C6E%2F01.%20Bum%20Bum%20Bum.flac)
20201101 194320 enhanceMetadata(): Song file
20201101 194320 engine-mpd: Metadata returned to client: Size=(29)Thank you for your precious help!
RE: No more sound... - the_bertrum - 11-02-2020
You mention you changed a cable, is it possible to change the cable back in case the fault lies in the cable?
RE: No more sound... - gorgonetriton - 11-02-2020
I did try to change the cable back, but it didn't bring back the sound... This so mysterious, I cannot figure what I have done to cause this situation
RE: No more sound... - DRONE7 - 11-02-2020
Your output shows HDMI=on but Local Display=off Do you have an HDMI cable connected for any reason ? or just the usb DAC
I'm not familiar with usbridge.. does it utilise HDMI for anything ?
Otherwise, a reboot with the dac connected should pick it up. Possibly the cable removal has reset the audio output.
Wonder why you are still on
Code:
6.4.2 2020-02-12Current Moode is 6.7.1 and 7.0 is to be released soon.
Have you a spare sdcard you could use ?, download the current moode and test (possible your 6.4.2 may be corrupted...this would check that)
RE: No more sound... - gorgonetriton - 11-07-2020
So I followed your advice and installed a newer version of Moode and indeed, it solved my problem, the sound is back again! Thank you really
