+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Official moOde 7.0.0 support thread (/showthread.php?tid=3268)
Official moOde 7.0.0 support thread - Tim Curtis - 12-18-2020
Hi,
Post all bug reports and questions concerning moOde 7.0.0 in this thread. Please paste log output, scripts, etc in code boxes for readability.
-Tim
RE: Official moOde 7.0.0 support thread - jurel - 12-18-2020
Hello, it seems that RPi headphone audio is not working. It has been worked in 6.7.1, but in 7.0.0 there is no sound. The audio info of the playing track shows RPi HDMI1. And before anyone comment about that the quality of the RPi headphones output..., I have a nice HiFiBerry DAC HD2, but I can't use it because it is not and probably won't be supported.
Thank you
RE: Official moOde 7.0.0 support thread - jonners - 12-18-2020
I've downloaded 7.0.0, written it to SD card with Etcher and installed it in my USBridge Sig but so far I've been unable to establish an ethernet connection to the player.
Version 6.7.1 still works OK.
RE: Official moOde 7.0.0 support thread - TheOldPresbyope - 12-18-2020
(12-18-2020, 08:42 PM)jurel Wrote: Hello, it seems that RPi headphone audio is not working. It has been worked in 6.7.1, but in 7.0.0 there is no sound. The audio info of the playing track shows RPi HDMI1.
...
Thank you
You need to tell us a lot more detail about your physical setup and your configuration of moOde 7.0.0.
No problems here. Just now I'm listening to Klipsch wired headphones plugged straight into the Pi Headphone Jack on an RPi3A+ running moOde 7.0.0.
Regards,
Kent
RE: Official moOde 7.0.0 support thread - Gabster 2000 - 12-18-2020
(12-18-2020, 06:30 PM)Tim Curtis Wrote: Hi,
Post all bug reports and questions concerning moOde 7.0.0 in this thread. Please paste log output, scripts, etc in code boxes for readability.
-Tim
Can not seem to load Ver 7.0 on Allo Usbridge Signature ver 6.7.1 was loading fine seems to hang on a black screen or this screen attached
flashed card a few times no go same card works on Pi3B+
anyone else have this issue ?
RE: Official moOde 7.0.0 support thread - jonners - 12-18-2020
(12-18-2020, 09:08 PM)jonners Wrote: I've downloaded 7.0.0, written it to SD card with Etcher and installed it in my USBridge Sig but so far I've been unable to establish an ethernet connection to the player.
Version 6.7.1 still works OK.
Ethernet with 7.0.0 and Pi3B+ connects OK but still not with USBridge Sig.
RE: Official moOde 7.0.0 support thread - Gabster 2000 - 12-18-2020
(12-18-2020, 09:08 PM)jonners Wrote: I've downloaded 7.0.0, written it to SD card with Etcher and installed it in my USBridge Sig but so far I've been unable to establish an ethernet connection to the player.
Version 6.7.1 still works OK.
same here Ver7 not loading
RE: Official moOde 7.0.0 support thread - Tim Curtis - 12-18-2020
(12-18-2020, 08:42 PM)jurel Wrote: Hello, it seems that RPi headphone audio is not working. It has been worked in 6.7.1, but in 7.0.0 there is no sound. The audio info of the playing track shows RPi HDMI1. And before anyone comment about that the quality of the RPi headphones output..., I have a nice HiFiBerry DAC HD2, but I can't use it because it is not and probably won't be supported.
Thank you
Open MPD Config and set Audio output to "Pi Headohone jack"
RE: Official moOde 7.0.0 support thread - Tim Curtis - 12-18-2020
(12-18-2020, 09:32 PM)Gabster 2000 Wrote:(12-18-2020, 06:30 PM)Tim Curtis Wrote: Hi,
Post all bug reports and questions concerning moOde 7.0.0 in this thread. Please paste log output, scripts, etc in code boxes for readability.
-Tim
Can not seem to load Ver 7.0 on Allo Usbridge Signature ver 6.7.1 was loading fine seems to hang on a black screen or this screen attached
flashed card a few times no go same card works on Pi3B+
anyone else have this issue ?
Very odd. Allo verified the pre-release image worked on their end with 32 and 64 bit kernel and there has been no change in the kernel in the GA release image.
I'll follow up with them to see if they can assist in troubleshooting.
-Tim
RE: Official moOde 7.0.0 support thread - Gabster 2000 - 12-18-2020
(12-18-2020, 09:54 PM)Tim Curtis Wrote:(12-18-2020, 09:32 PM)Gabster 2000 Wrote:(12-18-2020, 06:30 PM)Tim Curtis Wrote: Hi,
Post all bug reports and questions concerning moOde 7.0.0 in this thread. Please paste log output, scripts, etc in code boxes for readability.
-Tim
Can not seem to load Ver 7.0 on Allo Usbridge Signature ver 6.7.1 was loading fine seems to hang on a black screen or this screen attached
flashed card a few times no go same card works on Pi3B+
anyone else have this issue ?
Very odd. Allo verified the pre-release image worked on their end with 32 and 64 bit kernel and there has been no change in the kernel in the GA release image.
I'll follow up with them to see if they can assist in troubleshooting.
-Tim
Thanks Tim Appreciate the effort