Moode Forum
Official moOde 7.1.0 support thread - Printable Version

+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Official moOde 7.1.0 support thread (/showthread.php?tid=3615)

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20


RE: Official moOde 7.1.0 support thread - Tim Curtis - 03-18-2021

(03-18-2021, 06:35 PM)DRONE7 Wrote:
(03-18-2021, 06:04 PM)jonners Wrote: All good so far, except that 'Audio info' doesn't display anything - from either menu.

USBridge Sig., SMSL Sanskrit USB DAC.
Fresh install 7.1.0

Updated from 7.0.1 and no audio info. (rebooted to check but still no audio info)
System info reports...

Code:
cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory


Audio plays fine.

(just a note that when checking for the update from the System tab the Update Date is reported as 2020-15-3.... Wink  )

Thats a typo :-0 Fixed.

Missing Audio info might be due to not doing #4.

Code:
1) Monitor progress with the SSH command: moodeutl -t
2) Reboot after the completion message appears.
3) The file /var/local/www/update-VER.log contains a log of the update.
4) After reboot open MPD Config and SAVE to update the settings.



RE: Official moOde 7.1.0 support thread - DRONE7 - 03-18-2021

Quote:Missing Audio info might be due to not doing #4.

Unfortunately this is not it....I did follow the instructions  Smile  and rebooted a couple of times for good measure too.
Fixed....Cleared browser cache...(I should know that by now but somehow always forget Rolleyes )

Just noticed some funky new behaviour with the time display where the digits move up and down slightly (2 x /second ?)  
I'm assuming this is for a good reason ? though a little distracting..
Fixed....Firefox browser was having a hiccough....


RE: Official moOde 7.1.0 support thread - jonners - 03-18-2021

I have saved the MPD Config but still no Audio info.
No funkiness with my time display though.Smile


RE: Official moOde 7.1.0 support thread - the_bertrum - 03-18-2021

(03-18-2021, 07:35 PM)jonners Wrote: I have saved the MPD Config but still no Audio info.
No funkiness with my time display though.Smile

Save MPD config plus clear browser cache worked for me.


RE: Official moOde 7.1.0 support thread - jonners - 03-18-2021

(03-18-2021, 07:55 PM)the_bertrum Wrote:
(03-18-2021, 07:35 PM)jonners Wrote: I have saved the MPD Config but still no Audio info.
No funkiness with my time display though.Smile

Save MPD config plus clear browser cache worked for me.
Thanks. That's it, the browser cache. Cool


RE: Official moOde 7.1.0 support thread - yannig - 03-18-2021

It seems that I have a problem

more than one hour that moodeutl -t displays :
"Compile upmpdcli 1.5.8"

And the "sys-config" page is freezed.

(On a pi 3B)

I'm not sure what I have to or can do.

fresh install ?

Edit :
I waited and the installation finally went well
But the "compilation" part is very long on a Pi3B!


RE: Official moOde 7.1.0 support thread - Macdelf - 03-18-2021

I really apreciate the effort of all. Before moode I was in the world of cd’s and records.
One question. If answer is too difficult I can re generate the configuration with 7.1.
I have my Camilladsp files on the pi already from 7.0. 1 . This includes several impulse responses and a config.out.yaml. My impulse files also have headers ( I can delete the header, I put it in there so I could check it with rew).
Is there an easy way to update?
Is there a way to import from the pi when using ssh terminal? (If need be I can move them)

I found the subdirectory /user/share/configs and put my configuration file there, renaming the extention from ymal to yml and all seems to work


RE: Official moOde 7.1.0 support thread - MikeyFresh - 03-19-2021

I did the in-place update from 7.0.1 on RPi 4B 2GB v1.1, everything working fine with UPnP Renderer, another great release, big thanks to Tim and all of the Moode Team contributors!


RE: Official moOde 7.1.0 support thread - tonno - 03-19-2021

Did a fresh install since i was coming from 6.4 - everything is working great so far.

thanks for the great work and for the outstanding support.

regards
tonno


RE: Official moOde 7.1.0 support thread - astropuppy - 03-19-2021

having same long wait on A+. thanks for posting.


It seems that I have a problem

more than one hour that moodeutl -t displays :
"Compile upmpdcli 1.5.8"

And the "sys-config" page is freezed.

(On a pi 3B)

I'm not sure what I have to or can do.

fresh install ?

Edit :
I waited and the installation finally went well
But the "compilation" part is very long on a Pi3B!