+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: Audiophile (https://moodeaudio.org/forum/forumdisplay.php?fid=32)
+--- Forum: Audio gear (https://moodeaudio.org/forum/forumdisplay.php?fid=10)
+--- Thread: HIFIBERRY DIGI2 PRO support (/showthread.php?tid=4211)
HIFIBERRY DIGI2 PRO support - motorica - 09-20-2021
Hi
I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?
Thanks
David
RE: HIFIBERRY DIGI2 PRO support - TheOldPresbyope - 09-20-2021
(09-20-2021, 04:56 AM)motorica Wrote: Hi
I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?
Thanks
David
Hi, David.
The HiFiBerry Digi2 Pro datasheet says the overlay for config.txt is
dtoverlay=hifiberry-digi-pro
Regards,
Kent
RE: HIFIBERRY DIGI2 PRO support - motorica - 09-20-2021
Cool!
I saw this later:
https://www.hifiberry.com/blog/the-new-digi2-pro/
It should work.
Thank you Kent!
David
RE: HIFIBERRY DIGI2 PRO support - marek.marakesh - 11-23-2022
(09-20-2021, 11:19 AM)TheOldPresbyope Wrote:(09-20-2021, 04:56 AM)motorica Wrote: Hi
I'm using waveio usb to spdif converter with external linear psu with good results.
Considering i2s convertion using HIFIBERRY DIGI2 PRO
I don't see it in the list in moode audio devices, any chance it will work under Hifiberry digi pro +?
Thanks
David
Hi, David.
The HiFiBerry Digi2 Pro datasheet says the overlay for config.txt is
dtoverlay=hifiberry-digi-pro
Regards,
Kent
True,
it works perfectly with below setup:
Code:
pi@moode2:/var/www/util $ cat /boot/config.txt
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
[all]
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=hifiberry-digi-pro
force_eeprom_read=0
dtoverlay=disable-wifi
dtoverlay=disable-bt
pi@moode2:/var/www/util $ sudo ./sysinfo.sh
S Y S T E M P A R A M E T E R S
moOde release = 8.2.2 2022-10-23
RaspiOS = 11.5
Linux kernel = 5.15.61-v8+ #1579
Platform = Pi-3B+ 1.3 1GB
Architecture = aarch64 (64-bit)
.
.
.
NGINX version = 1.18.0
SQLite3 version = 3.34.1
Hostapd version = 2.9
RPi.GPIO version = 0.7.0Code:
A U D I O P A R A M E T E R S
Audio device = HiFiBerry Digi+ Pro
Interface = I2S
Mixer name = none
Hardware mixer = No
Supported formats = S16_LE, S24_LE
ALSA max volume = 100
ALSA output mode = Direct (hw)
ALSA loopback = Off
MPD max volume = 80
Volume step limit = 2
Display dB volume = On
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.2.4-1.1+rpt2
SoX version = 0.1.3-4
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = On
Spotify receiver = On
Squeezelite = Off
RoonBridge = Not installed
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
Multiroom sender = Off
Multiroom receiver = Disabled
Auto-shuffle = Off
Ashuffle mode = Track
Ashuffle filter = None
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
CamillaDSP = off
MPD httpd = Off
Ignore CUE files = Yes