[How to do instruction] LCD/OLED display using pydPiper - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9) +--- Thread: [How to do instruction] LCD/OLED display using pydPiper (/showthread.php?tid=461) |
RE: LCD/OLED display using pydPiper - cyoops - 03-27-2019 Hi guys, thanks a lot for the excellent tutorial. My OLED works in proper right now. I still have two questions: 1. how can I add truetype font for pydPiper, I tried different ways (usr/share/**, pydPiper/display/fonts/*** …)and always says font not found. So I have to use the customized fnt instead. 2.how to display the filename when there is no title. I try to edit the musicdata_mpd.py self.musicdata[u'title'] = current_song[u'title'] if u'title' in current_song else current_song[u'file'] and it works but display the whole url not the filename. which parameter should I use? Thank you again for your wonderful works. RE: LCD/OLED display using pydPiper - Cyanoazimin - 04-07-2019 Thank you remy1961 for your instructions. Works fine. Here my "lessons learned":
SDA--------------- PIN 3 SCL/SCK---------- PIN 5 VCC--------------- PIN 1 (3.3 V instead of 5.0 V, sufficient and less risky) GND--------------- any ground PIN
RE: LCD/OLED display using pydPiper - TheOldPresbyope - 04-07-2019 @Cyanoazimin Nice summary. Regards, Kent RE: LCD/OLED display using pydPiper - Titi2507 - 04-13-2019 Hello, i've installed pydPiper with a 20x4 lcd i2c display on Moode, everything works very well except when i'm listening a big playlist, here, display freezes and refresh several seconds later, but when i'm listening an album, a song or a little playlist it does not do it, i don't know why. RE: LCD/OLED display using pydPiper - CallMeMike - 04-14-2019 (04-13-2019, 04:17 PM)Titi2507 Wrote: Hello, i've installed pydPiper with a 20x4 lcd i2c display on Moode, everything works very well except when i'm listening a big playlist, here, display freezes and refresh several seconds later, but when i'm listening an album, a song or a little playlist it does not do it, i don't know why. Was this particular playlist working fine before installing pydPiper? RE: LCD/OLED display using pydPiper - Titi2507 - 04-14-2019 Hello, the playlist is working fine, it is just the display who freezes, i used TOP to see resources usage and i can see that python is using 100% of resources with this playlist. RE: LCD/OLED display using pydPiper - JST1963 - 05-08-2019 Hi moOde fans, RE: LCD/OLED display using pydPiper - Titi2507 - 05-17-2019 Hello, i'm trying to install pydPiper on Moode 5.2 but it doesn't work i don't know why . I was on Moode 5.0 and everything works perfectly. Is everyone has the same problem ?. RE: LCD/OLED display using pydPiper - Jempie - 05-21-2019 I have the same problem RE: LCD/OLED display using pydPiper - brunal - 05-21-2019 Hi all, My configuration: moOde 5.2 2019-05-07 Update = None HDWR REV = Pi-2B 1GB v1.1 SoC = BCM2835 RASPBIAN = 9.9 KERNEL = 4.19.40-v7+ ROOT size = 15G ROOT used = 17% ROOT avail = 12G FS expand = expanded MEM free = 316 MB MEM used = 179 MB I have a strange behavior, and even after digging, I can't understand what is going on: After configuring pydPiper, when I try to run the test command (or if I run the service), I get stuck here: Code: sudo docker run --network=host --privileged -v /var/log:/var/log:rw -v /home/pi/pydPiper:/app:rw dhrone/pydpiper:v0.31-alpha python /app/pydPiper.py Any though to solve my problem? (Of course I don't have any network problems nor internet connection). |