+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Roon bridge on 8.1.1. 64bit (/showthread.php?tid=4912)
Roon bridge on 8.1.1. 64bit - hansStahlhelm - 06-25-2022
Hello,
just put the 8.1.1. 64bit image (image_2022-06-24-moode-r811-arm64-lite.zip) on a SD-card, fired up moOde and restored settings from backup. I then wanted to install Roon bridge as per https://moodeaudio.org/forum/showthread.php?tid=3200
However, it does not seem to work. Any help is appreciated (might want to try the 32bit version but wait for confirmation).
Here's the SSH output:
Code:
Downloading RoonBridge_linuxarmv7hf.tar.bz2 to /tmp/tmp.jkdutyatOo/RoonBridge_linuxarmv7hf.tar.bz2
######################################################################### 100.0%
Unpacking RoonBridge_linuxarmv7hf.tar.bz2...Done
Checking to see if RoonBridge can run on this machine
Checking for Binary Compatibility [ FAILED ]
Checking for ALSA Libraries [ FAILED ]
STATUS: FAILED
These issues must be addressed before RoonBridge will run on this machine.
For more information on how to address this, see:
http://kb.roonlabs.com/LinuxInstall
--------------------------------------------------------------------------------------
The RoonBridge installer did not complete successfully.
If you are not sure how to proceed, please check out:
- Roon Labs Community https://community.roonlabs.com/c/support
- Roon Labs Knowledge Base https://kb.roonlabs.com/LinuxInstallRE: Roon bridge on 8.1.1. 64bit - TheOldPresbyope - 06-25-2022
(06-25-2022, 11:48 AM)hansStahlhelm Wrote: Hello,
just put the 8.1.1. 64bit image (image_2022-06-24-moode-r811-arm64-lite.zip) on a SD-card, fired up moOde and restored settings from backup. I then wanted to install Roon bridge as per https://moodeaudio.org/forum/showthread.php?tid=3200
However, it does not seem to work. Any help is appreciated (might want to try the 32bit version but wait for confirmation).
Here's the SSH output:
Code:Downloading RoonBridge_linuxarmv7hf.tar.bz2 to /tmp/tmp.jkdutyatOo/RoonBridge_linuxarmv7hf.tar.bz2
######################################################################### 100.0%
Unpacking RoonBridge_linuxarmv7hf.tar.bz2...Done
Checking to see if RoonBridge can run on this machine
Checking for Binary Compatibility [ FAILED ]
Checking for ALSA Libraries [ FAILED ]
STATUS: FAILED
These issues must be addressed before RoonBridge will run on this machine.
For more information on how to address this, see:
http://kb.roonlabs.com/LinuxInstall
--------------------------------------------------------------------------------------
The RoonBridge installer did not complete successfully.
If you are not sure how to proceed, please check out:
- Roon Labs Community https://community.roonlabs.com/c/support
- Roon Labs Knowledge Base https://kb.roonlabs.com/LinuxInstall
You have the installer for the 32-bit version of RoonBridge.
Try https://download.roonlabs.net/builds/roonbridge-installer-linuxarmv8.sh instead.
Regards,
Kent
RE: Roon bridge on 8.1.1. 64bit - hansStahlhelm - 06-25-2022
appreciate the swift support and thanks for this great piece of software to the team!
RE: Roon bridge on 8.1.1. 64bit - chaos333 - 07-01-2022
mark,
some time ago i met the same alsa problem while still not solution yet.
i will try as suggested here and see what might comes out.