+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Can't update 8.1.0 (/showthread.php?tid=4915)
Can't update 8.1.0 - MikeyFresh - 06-25-2022
I have a 32-bit instance of 8.1.0 that was recently in-place updated from 8.0.2 that is now not showing any available update for 8.1.1.
I've tried clearing the cache, and closing/reopening the browser to no avail. Both Safari and Chrome do the same thing.
rrms/5.15.28-v7l+
rmmod: ERROR: Module configs is not currently loadedmod: ERROR: Module configs is not currently loadedmmod: ERROR: Module configs is not currently loadedrmmod: ERROR: Module configs is not currently loaded
RE: Can't update 8.1.0 - MikeyFresh - 06-25-2022
I also see an odd message in the screenshot of the system information attached.
This bit too:
Kernel timer freq = No /proc/config.gz Hz
RE: Can't update 8.1.0 - Tim Curtis - 06-25-2022
Reboot and post the moOde startup log and I'll have a look.
Code:
moodeutl -lRE: Can't update 8.1.0 - MikeyFresh - 06-25-2022
Code:
pi@aluGroove:~ $ moodeutl -l
20220625 121545 worker: --
20220625 121546 worker: -- Start moOde 8 series
20220625 121546 worker: --
20220625 121546 worker: Successfully daemonized
20220625 121548 getMpdSock(): Connection to MPD failed
20220625 121553 worker: File check (OK)
20220625 121553 worker: Session vacuumed
20220625 121553 worker: Session loaded
20220625 121553 worker: Debug logging (OFF)
20220625 121553 worker: --
20220625 121553 worker: -- Audio debug
20220625 121553 worker: --
20220625 121553 worker: ALSA cards: (0:b1 | 1:Headphones | 2:Pro | 3:empty
20220625 121553 worker: MPD config: (2:D30 Pro | mixer:(D30 Pro) | card:2)
20220625 121554 worker: ALSA mixer actual (D30 Pro)
20220625 121554 worker: ALSA D30 Pro volume set to (0%)
20220625 121554 worker: --
20220625 121554 worker: -- System
20220625 121554 worker: --
20220625 121554 getMpdSock(): Connection to MPD failed
20220625 121555 worker: Host (aluGroove)
20220625 121555 worker: moOde (8.1.0 2022-06-21)
20220625 121555 worker: RaspiOS (11.2)
20220625 121555 worker: Kernel (5.15.32-v7l+ #1537)
20220625 121555 worker: Platform (Pi-4B 1.4 2GB)
20220625 121555 worker: ARM arch (armv7l, 32-bit)
20220625 121555 worker: MPD ver (0.23.5)
20220625 121555 worker: CPU gov (ondemand)
20220625 121557 worker: USB boot (enabled)
20220625 121557 worker: File sys (expanded)
20220625 121557 worker: HDMI port (Off)
20220625 121557 worker: Sys LED0 (On)
20220625 121557 worker: Sys LED1 (On)
20220625 121557 worker: --
20220625 121557 worker: -- Network
20220625 121557 worker: --
20220625 121557 worker: eth0 adapter exists
20220625 121557 worker: eth0 check for address (No)
20220625 121557 worker: IP addr (10.0.1.135)
20220625 121557 worker: Netmask (255.255.255.0)
20220625 121557 worker: Gateway (10.0.1.1)
20220625 121557 worker: Pri DNS (10.0.1.1)
20220625 121557 worker: Domain ()
20220625 121557 worker: wlan0 adapter does not exist
20220625 121557 worker: --
20220625 121557 worker: -- Audio config
20220625 121557 worker: --
20220625 121558 worker: MPD conf updated (USB device + In-place update)
20220625 121558 worker: ALSA card number (2)
20220625 121558 worker: MPD audio output (D30 Pro)
20220625 121558 worker: Audio formats (S32_LE, SPECIAL, DSD_U32_BE)
20220625 121558 worker: ALSA mixer name (D30 Pro)
20220625 121558 worker: MPD mixer type (fixed 0dB)
20220625 121558 worker: Hdwr volume controller exists
20220625 121558 worker: Max ALSA volume (100%)
20220625 121558 worker: ALSA output mode (Default: plughw)
20220625 121558 worker: ALSA loopback (Off)
20220625 121558 worker: Reset renderer active flags
20220625 121558 worker: CamillaDSP (off)
20220625 121558 worker: --
20220625 121558 worker: -- MPD startup
20220625 121558 worker: --
20220625 121559 worker: MPD started
20220625 121559 worker: MPD accepting connections
20220625 121559 worker: MPD output 1 ALSA Default (On)
20220625 121559 worker: MPD output 2 ALSA Bluetooth (Off)
20220625 121559 worker: MPD output 3 HTTP Server (Off)
20220625 121559 worker: MPD crossfade (off)
20220625 121559 worker: MPD ignore CUE files (yes)
20220625 121559 worker: --
20220625 121559 worker: -- Music sources
20220625 121559 worker: --
20220625 121559 worker: USB sources (none attached)
20220625 121601 worker: NAS sources (mountall initiated)
20220625 121601 worker: --
20220625 121601 worker: -- Feature availability
20220625 121601 worker: --
20220625 121601 worker: Source select (available)
20220625 121601 worker: Source select (source: MPD)
20220625 121601 worker: Source select (output: D30 Pro)
20220625 121601 worker: Bluetooth (available)
20220625 121601 worker: Airplay renderer (available)
20220625 121601 worker: Spotify renderer (available)
20220625 121601 worker: Squeezelite (available)
20220625 121601 worker: RoonBridge renderer (not installed)
20220625 121601 worker: Multiroom sender (available)
20220625 121601 worker: Multiroom receiver (available)
20220625 121601 worker: UPnP renderer (available: started)
20220625 121601 worker: DLNA server (available)
20220625 121601 worker: GPIO button handler (available)
20220625 121601 worker: Stream recorder (n/a)
20220625 121601 worker: --
20220625 121601 worker: -- Other
20220625 121601 worker: --
20220625 121601 worker: USB volume knob (Off)
20220625 121601 worker: USB auto-mounter (udisks-glue)
20220625 121601 worker: Saved MPD vol level (0)
20220625 121601 worker: Preamp volume level (0)
20220625 121601 worker: MPD volume level (0) restored
20220625 121601 worker: ALSA D30 Pro volume (100%)
20220625 121601 worker: Auto-play (Off)
20220625 121601 worker: CoverView toggle (-off)
20220625 121601 worker: Maintenance interval (120 minutes)
20220625 121601 worker: Screen saver activation (Never)
20220625 121601 worker: Session permissions (OK)
20220625 121601 worker: Watchdog started
20220625 121601 worker: Ready
20220625 121619 worker: Job shellinabox
pi@aluGroove:~ $RE: Can't update 8.1.0 - Skip Pack - 06-25-2022
I did a fresh image install of 8.1.0 yesterday which was successful. I found one apparent bug but I want to run some more tests to narrow it down before I report it. I noticed that 8.1.1 was available as an in-place update and have tried to do that, but it just reports back that I'm up to date (system data says 8.1.0). This is the 64bit version with Chrome.
RE: Can't update 8.1.0 - MikeyFresh - 06-25-2022
The reboot seems to have cured everything there, no longer anything weird showing in System Info, and the in-place update to 8.1.1 is now available and currently being applied.
Not sure what happened there as this unit was rebooted more than once recently, both on the initial in-place update from 8.0.2 to 8.1.0, and again this morning when I had trouble.
RE: Can't update 8.1.0 - MikeyFresh - 06-25-2022
8.1.1 in-place update is now completed and everything looks good, still not sure exactly what happened there as the unit was playing music both last night and this morning, it wasn't broken from that perspective.
Thanks Tim!