+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [split] moOde 8.1.2 slow response (Allo USBridge Sig) (/showthread.php?tid=5008)
[split] moOde 8.1.2 slow response (Allo USBridge Sig) - praveen.sg8 - 08-06-2022
Iam using latest 2022-07-08-moode-r812-arm64-lite.img on my USB Bridge Signature but tMoode is page is getting stuck on my chrome browser tried explorer also. Especially while using phone Chrome browser.
Eg cannot open the drives , when i click the drive icons no action will come after some 2 ot 3 mints next page will load.
Please advise what could be the issue.
Thanks In advance
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - Tim Curtis - 08-06-2022
Very odd.
Reboot and post the moOde startup log and I'll have a look.
Code:
moodeutl -lRE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - praveen.sg8 - 08-07-2022
(08-06-2022, 04:26 PM)Tim Curtis Wrote: Very odd.login as: pi
Reboot and post the moOde startup log and I'll have a look.
Code:moodeutl -l
pi@192.168.1.23's password:
Linux: 11.3 | 5.15.32-v8+ #1538 | aarch64 (64-bit)
Raspi: Allo USBridge SIG [CM3+ Lite 1GB v1.0]
Audio: Musical Fidelity V90-DAC 24/96
____ __ ___
__ _ ___ / __ \___/ /__ ( _ )
/ ' \/ _ \/ /_/ / _ / -_) / _ |
/_/_/_/\___/\____/\_,_/\__/ \___/
moOde audio player
Release 8.1.2 2022-07-08
© 2014 Tim Curtis
The programs included with moOde are free software; the
exact distribution terms for each program are described
in the individual files in /usr/share/doc/*/copyright or
in the moOde source files. moOde comes with absolutely
no warranties either expressed or implied, or any other
such guarantees.
To set a new password for the user 'pi' type 'passwd'.
Last login: Sat Jul 9 01:29:06 2022 from 192.168.1.27
pi@moode:~ $ moodeutl -l
20220709 013040 worker: --
20220709 013040 worker: -- Start moOde 8 series
20220709 013040 worker: --
20220709 013040 worker: Successfully daemonized
20220709 013043 getMpdSock(): Connection to MPD failed
20220709 013043 getMpdSock(): Connection to MPD failed
20220709 013044 worker: File check (OK)
20220709 013046 worker: Session vacuumed
20220709 013046 worker: Session loaded
20220709 013046 worker: Debug logging (ON)
20220709 013046 worker: --
20220709 013046 worker: -- Audio debug
20220709 013046 worker: --
20220709 013046 worker: ALSA cards: (0:b1 | 1:Headphones | 2:M2496 | 3:empty
20220709 013046 worker: MPD config: (2:Musical Fidelity V90-DAC 24/96 | mixer
PCM) | card:2)20220709 013046 worker: ALSA mixer actual (PCM)
20220709 013046 worker: ALSA PCM volume set to (amixer: Unable to find simple control 'PCM',0)
20220709 013046 worker: --
20220709 013046 worker: -- System
20220709 013046 worker: --
20220709 013048 worker: Host (moode)
20220709 013048 worker: moOde (8.1.2 2022-07-08)
20220709 013048 worker: RaspiOS (11.3)
20220709 013048 worker: Kernel (5.15.32-v8+ #1538)
20220709 013048 worker: Platform (Allo USBridge SIG [CM3+ Lite 1GB v1.0])
20220709 013048 worker: ARM arch (aarch64, 64-bit)
20220709 013048 worker: MPD ver (0.23.5)
20220709 013048 worker: CPU gov (ondemand)
20220709 013048 worker: USB boot (not available)
20220709 013048 worker: File sys (expanded)
20220709 013048 worker: HDMI port (On)
20220709 013049 worker: Sys LED0 (On)
20220709 013049 worker: Sys LED1 (sysclass does not exist)
20220709 013049 worker: --
20220709 013049 worker: -- Network
20220709 013049 worker: --
20220709 013049 worker: eth0 adapter exists
20220709 013049 worker: eth0 check for address (No)
20220709 013049 worker: IP addr (192.168.1.23)
20220709 013049 worker: Netmask (255.255.255.0)
20220709 013049 worker: Gateway (192.168.1.1)
20220709 013049 worker: Pri DNS (8.8.8.8)
20220709 013049 worker: Domain (bbrouter)
20220709 013049 worker: wlan0 adapter does not exist
20220709 013049 worker: --
20220709 013049 worker: -- Audio config
20220709 013049 worker: --
20220709 013049 worker: MPD conf update skipped (USB device)
20220709 013049 worker: ALSA card number (2)
20220709 013049 worker: MPD audio output (Musical Fidelity V90-DAC 24/96)
20220709 013049 worker: Audio formats (S24_3LE)
20220709 013049 worker: ALSA mixer name (PCM)
20220709 013049 worker: MPD mixer type (software)
20220709 013049 worker: Hdwr volume controller not detected
20220709 013049 worker: ALSA output mode (Default: plughw)
20220709 013049 worker: ALSA loopback (Off)
20220709 013049 worker: Reset renderer active flags
20220709 013050 worker: CamillaDSP (off)
20220709 013050 worker: --
20220709 013050 worker: -- MPD startup
20220709 013050 worker: --
20220709 013051 worker: MPD started
20220709 013051 worker: MPD accepting connections
20220709 013051 worker: MPD output 1 ALSA Default (On)
20220709 013051 worker: MPD output 2 ALSA Bluetooth (Off)
20220709 013051 worker: MPD output 3 HTTP Server (Off)
20220709 013051 worker: MPD crossfade (off)
20220709 013051 worker: MPD ignore CUE files (yes)
20220709 013051 worker: --
20220709 013051 worker: -- Music sources
20220709 013051 worker: --
20220709 013051 worker: USB source (ADATA HD710 PRO)
20220709 013100 sourceMount(): Mount error: (mount error(113): could not connect to 192.168.1.39Unable to find suitable address.)
20220709 013100 sourceMount(): Command=(mount -t cifs "//192.168.1.39/E/ALLMUSIC" -o u
20220709 013100 worker: --
20220709 013100 worker: -- Feature availability
20220709 013100 worker: --
20220709 013100 worker: Source select (available)
20220709 013100 worker: Source select (source: MPD)
20220709 013100 worker: Source select (output: Musical Fidelity V90-DAC 24/96)
20220709 013100 worker: Bluetooth (available)
20220709 013100 worker: Airplay renderer (available)
20220709 013100 worker: Spotify renderer (available)
20220709 013100 worker: Squeezelite (available)
20220709 013100 worker: RoonBridge renderer (not installed)
20220709 013100 worker: Multiroom sender (available)
20220709 013100 worker: Multiroom receiver (available)
20220709 013100 worker: UPnP renderer (available)
20220709 013100 worker: DLNA server (available)
20220709 013100 worker: GPIO button handler (available)
20220709 013100 worker: Stream recorder (n/a)
20220709 013100 worker: --
20220709 013100 worker: -- Other
20220709 013100 worker: --
20220709 013100 worker: USB volume knob (Off)
20220709 013100 worker: Shellinabox SSH started
20220709 013100 worker: USB auto-mounter (udisks-glue)
20220709 013100 worker: Saved MPD vol level (0)
20220709 013100 worker: Preamp volume level (0)
20220709 013100 worker: MPD volume level (100) restored
20220709 013100 worker: ALSA volume level (None)
20220709 013100 worker: Auto-play (Off)
20220709 013100 worker: CoverView toggle (-off)
20220709 013100 worker: Maintenance interval (120 minutes)
20220709 013100 worker: Screen saver activation (Never)
20220709 013100 worker: Session permissions (OK)
20220709 013100 worker: Watchdog started
20220709 013100 worker: Ready
pi@moode:~ $
Also one of the folder in my Connected hard drive is not getting updated fully to Library. Tried to regenerate the library, update library many tmes.Still not getting updated fully
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - Tim Curtis - 08-07-2022
I don't see anything in the log that would affect response times from clients except perhaps the DNS address. Typically a residential router will assign clients a DNS address which is same as the gateway (LAN) address which in your case would be 192.168.1.1. This is because these routers proxy DNS queries. If DNS resolving is slow then everything between client and server will be slow or will timeout/hang.
Code:
20220709 013049 worker: Pri DNS (8.8.8.8)The first NAS mount below that errors out is odd. I'm not sure what might be causing that.
Code:
20220709 013100 sourceMount(): Mount error: (mount error(113): could not connect to 192.168.1.39Unable to find suitable address.)
[size=small]20220709 013100 sourceMount(): Command=(mount -t cifs "//192.168.1.39/E/ALLMUSIC" -o username="GANGACORP",password="ganga!!123",rsize=61440,wsize=65536,iocharset=utf8,ro,dir_mode=0777,file_mode=0777 "/mnt/NAS/ALLMUSIC")
[/size]
20220709 013100 worker: NAS sources (mountall initiated)RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - TheOldPresbyope - 08-07-2022
True, many residential AP/router/cable modems provide local DNS service but not all. My Comcast-provided ARRIS hardware does not, for example.
Code:
20220807 102207 worker: IP addr (10.0.0.5)
20220807 102207 worker: Netmask (255.255.255.0)
20220807 102207 worker: Gateway (10.0.0.1)
20220807 102207 worker: Pri DNS (75.75.75.75)
20220807 102207 worker: Domain (hsd1.md.comcast.net)Practically, all this means is I have to use either IP (e.g., 10.0.0.5) or mDNS (e.g., moode.local) to reference a local host. The responsiveness of all hosts on the LAN is great.
IP and mDNS references work fine in moOde's Music Source Config.
Here's one of my NAS shares mounted in my moOde player by its mDNS name
Code:
//OMV-HC1.local/MUSIC on /mnt/NAS/OMV-Music type cifs (ro,relatime,vers=3.1.1,cache=strict,username=Guest,uid=0,noforceuid,gid=0,noforcegid,addr=10.0.0.2,file_mode=0777,dir_mode=0777,iocharset=utf8,soft,nounix,serverino,mapposix,rsize=61440,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1)but here's another share from the same server which I've mounted using its IP address
Code:
//10.0.0.2/Test on /mnt/NAS/OMV-Test type cifs (ro,relatime,vers=3.1.1,cache=strict,username=xxxxx,uid=0,noforceuid,gid=0,noforcegid,addr=10.0.0.2,file_mode=0777,dir_mode=0777,iocharset=utf8,soft,nounix,serverino,mapposix,rsize=61440,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1)Which brings us to the OPs mount error 113. This code means that Linux timed out trying failed to resolve the IP address 192.168.1.39 at that moment. Assuming this is a correct IP address, it would seem there's some instability in the OPs LAN.
Regards,
Kent
PS - recent releases of Android now provide first-class support for mDNS including in the browser search bar, yay!
PPS - I need to get around to setting up a separate subnet with Pi-Hole running to provide local DNS and other goodness. Mañana.
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - praveen.sg8 - 08-15-2022
(08-07-2022, 03:36 PM)But still the problem of loading pages of Moode on android device as well as windows is very slow.Cant understand the issue.I tried with another person who is using the moode on USB Bridge signature and he also finds the same issue.Kindly work out a solution for the same TheOldPresbyope Wrote: True, many residential AP/router/cable modems provide local DNS service but not all. My Comcast-provided ARRIS hardware does not, for example.
Code:20220807 102207 worker: IP addr (10.0.0.5)
20220807 102207 worker: Netmask (255.255.255.0)
20220807 102207 worker: Gateway (10.0.0.1)
20220807 102207 worker: Pri DNS (75.75.75.75)
20220807 102207 worker: Domain (hsd1.md.comcast.net)
Practically, all this means is I have to use either IP (e.g., 10.0.0.5) or mDNS (e.g., moode.local) to reference a local host. The responsiveness of all hosts on the LAN is great.
IP and mDNS references work fine in moOde's Music Source Config.
Here's one of my NAS shares mounted in my moOde player by its mDNS name
Code://OMV-HC1.local/MUSIC on /mnt/NAS/OMV-Music type cifs (ro,relatime,vers=3.1.1,cache=strict,username=Guest,uid=0,noforceuid,gid=0,noforcegid,addr=10.0.0.2,file_mode=0777,dir_mode=0777,iocharset=utf8,soft,nounix,serverino,mapposix,rsize=61440,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1)
but here's another share from the same server which I've mounted using its IP address
Code://10.0.0.2/Test on /mnt/NAS/OMV-Test type cifs (ro,relatime,vers=3.1.1,cache=strict,username=xxxxx,uid=0,noforceuid,gid=0,noforcegid,addr=10.0.0.2,file_mode=0777,dir_mode=0777,iocharset=utf8,soft,nounix,serverino,mapposix,rsize=61440,wsize=65536,bsize=1048576,echo_interval=60,actimeo=1)
Which brings us to the OPs mount error 113. This code means that Linux timed out trying failed to resolve the IP address 192.168.1.39 at that moment. Assuming this is a correct IP address, it would seem there's some instability in the OPs LAN.
Regards,
Kent
PS - recent releases of Android now provide first-class support for mDNS including in the browser search bar, yay!
PPS - I need to get around to setting up a separate subnet with Pi-Hole running to provide local DNS and other goodness. Mañana.
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - Tim Curtis - 08-15-2022
The symptom "slow page loading" suggests something external to Moode software for example network issues, hardware issues, bad SD Card, corrupt or huge Browser cache etc. I have a SIG and no issues whatsoever using any Browser, Ethernet or WiFi.
The challenge in your particular case is to try to isolate the problem. Typically this is done by a process of swapping components one at a time until one of the swaps resolves the issue. You might want to start by swapping to a standard Pi with a new SD Card, stock moOde image and known good power supply. Don't connect any USB drives or NAS mounts. if the issue still occurs then most likely its a network issue. If the standard Pi works well then add the music sources one at a time and re-test.
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - praveen.sg8 - 08-17-2022
Iam facing issue on full music folder files not getting updated on Moode USB drive library.
Kindly inform how to get it updated fully
RE: [split] moOde 8.1.2 slow response (Allo USBridge Sig) - Nutul - 08-17-2022
(08-17-2022, 02:31 PM)praveen.sg8 Wrote: Iam facing issue on full music folder files not getting updated on Moode USB drive library.
Kindly inform how to get it updated fully
Hi,
same for you, in these situations is helpful if we can get more information about your system:
so please reboot your system and post here the startup log, which you can get with the command
Code:
moodeutl -lAlso, I remember to have seen a similar issue: no external drive being detected at all; it was strange, maybe you can see this post of mine:
https://moodeaudio.org/forum/showthread.php?tid=4902