+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Feature requests (https://moodeaudio.org/forum/forumdisplay.php?fid=8)
+--- Thread: Left & Right Equalizer (/showthread.php?tid=5597)
Left & Right Equalizer - megane79 - 05-23-2023
Hi,
I suggest the possibility of dividing the equalizer in two, in order to manage the right and left channels independently.
Thank you
RE: Left & Right Equalizer - the_bertrum - 05-24-2023
There's a bit of learning involved to get going, but you can achieve this with the CamillaDSP feature.
In short, you need a set of "Biquad Peaking" filters with the frequency set to the centre value of each "slider" of the EQ, a gain for how much up or down you slide it, and a q value for how "wide" the peak is (usually quite narrow). I dare say someone can even tell you what the frequency and q values for the EQ in moOde are to get you started. Obviously, you just need to define a different set of filters for the right and left channels.
RE: Left & Right Equalizer - megane79 - 05-24-2023
(05-24-2023, 06:57 AM)the_bertrum Wrote: There's a bit of learning involved to get going, but you can achieve this with the CamillaDSP feature.
In short, you need a set of "Biquad Peaking" filters with the frequency set to the centre value of each "slider" of the EQ, a gain for how much up or down you slide it, and a q value for how "wide" the peak is (usually quite narrow). I dare say someone can even tell you what the frequency and q values for the EQ in moOde are to get you started. Obviously, you just need to define a different set of filters for the right and left channels.
I equalized directly with CamillaDSP, but I think there are also users who are not trained enough to use it.
RE: Left & Right Equalizer - bitlab - 05-30-2023
To save other users some time (and or learning curve), you could share your config here ;-)