+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [PROBLEM] Can't get into the configuration settings pages (/showthread.php?tid=6274)
Can't get into the configuration settings pages - pbjacob - 03-01-2024
First of all, my system infos are as follows.
Pi: 3B+
DAC: ProtoDAC 1387x8
OS: 8.3.8
Problem:
When I first entered the system, everything was fine. However, when I started to try to configure it, I found that I couldn't access the settings page anymore. But interestingly, the playback interface is accessible, and all operations under the playback interface can be carried out normally.
Even after restarting the device, whether accessing from a computer or a mobile phone, the same situation persists: I can access the system, but not the configure settings. I guess that some of my previous settings caused this issue, but now I am unable to access the settings page at all.
So, is there a way to reset all settings of the system? Thank you so much.
P. S. As long as I can remember, the settings I made while I could still access the settings page were approximately as follows: selected "software" for volume control and "ProtoDAC" for the Named I2S devices. As for the MPD options page, I don't recall making any specific operations.
Thanks again.
RE: Can't get into the configuration settings pages - Tim Curtis - 03-01-2024
Use the Raspberry Pi Imager to make a fresh 8.3.9 image and follow the REQUIRED items in the Setup Guide.