+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Feature requests (https://moodeaudio.org/forum/forumdisplay.php?fid=8)
+--- Thread: Extend PEQ with low and high shelf filters (/showthread.php?tid=6444)
Extend PEQ with low and high shelf filters - PJVervoorn - 05-02-2024
I use PEQ for some of my headphones, most of these contain Peak filters, but some of the filters that can be found (e.g. here: https://github.com/jaakkopasanen/AutoEq/blob/master/results/INDEX.md) contain low and/or high shelves.
An example:
[attachment=3752]
It would be great if the PEQ would be extended with the low and high shelf filter types.
RE: Extend PEQ with low and high shelf filters - Tim Curtis - 05-02-2024
Try CamillaDSP. There is a sample V2-PEQ 10-Band configuration. Click the Filters tab where you can set the subtype for each freq band.
RE: Extend PEQ with low and high shelf filters - PJVervoorn - 05-03-2024
(05-02-2024, 12:17 PM)Tim Curtis Wrote: Try CamillaDSP. There is a sample V2-PEQ 10-Band configuration. Click the Filters tab where you can set the subtype for each freq band.
Thanks, I’m using CamillaDSP with convolution files, didn’t know it could do PEQ too.
Looking at https://github.com/HEnquist/camilladsp?tab=readme-ov-file#iir it seems really easy to convert the headphone data to Camilla’s IIR format.
But, I don’t see a “Filters” tab in moode.
PLATFORM INFORMATION
- RaspiOS: 11.9 Bullseye 32-bit
- Linux kernel: 6.1.21 32-bit
- Pi model: Pi-Zero 2 W 1.0 512MB
- MPD version: 0.23.14
RE: Extend PEQ with low and high shelf filters - Tim Curtis - 05-03-2024
The Filters tab is in the CamillaDSP Pipeline editor.
RE: Extend PEQ with low and high shelf filters - PJVervoorn - 05-03-2024
Found. Thanks!