+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9)
+--- Thread: [How to do instruction] AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M (/showthread.php?tid=664)
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - Andy Ruhrpott - 01-08-2019
Hello and thanks for the hint.
Found that and burned it on the SD. Works well as far as the time of the one hour less is displayed than we have in Germany.
Can I fix this somehow?
Greetings Andreas
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - rikardo1979 - 01-08-2019
(01-08-2019, 09:26 PM)Andy Ruhrpott Wrote: Hello and thanks for the hint.
Found that and burned it on the SD. Works well as far as the time of the one hour less is displayed than we have in Germany.
Can I fix this somehow?
Greetings Andreas
Just check the settings of moOde m8
https://github.com/moode-player/moode/blob/master/www/setup.txt
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - Jempie - 02-25-2019
Rikardo,
can i add the display they use with the mini on my ES9023 dac?
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - rikardo1979 - 02-28-2019
(02-25-2019, 09:48 PM)Jempie Wrote: Rikardo,
can i add the display they use with the mini on my ES9023 dac?
dont think so you can do. As far as I remember those have a different connections
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - nowy1 - 03-06-2019
I need help how to connect the display after "spi" to raspberry pi?
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - kit1cat - 03-08-2019
New Image page for AUDIOPHONICS products, must admit I llike the look of the new RaspTouch.
https://www.audiophonics.fr/en/blog-diy-audio/23-start-up-raspdac-rasptouch-raspdac-mini-with-a-pre-configured-image.html
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - Cardone - 03-30-2019
(03-06-2019, 05:00 PM)nowy1 Wrote: I need help how to connect the display after "spi" to raspberry pi?
Hello,
My settings.
• 1: Ground -> PIN 20
• 2: VCC 3.3V -> PIN 17
• 3: D0 -> PIN 23
• 4: D1 -> PIN 19
• 5: RES -> PIN 22 = GPIO 25 <-
• 6: DC -> PIN 18 = GPIO 24 <-
• 7: CS -> PIN 24
Then you have to make the setting in moode_oled_1.54_spi_audiophonics.py.
this is what the adaptation looks like for me:
serial = spi (port = 0, device = 0, gpio_DC = 24, gpio_RST = 25)
Then a reboot
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - rikardo1979 - 04-16-2019
Some changes in install for new moOde 5.x versions. Please read first page in this thread
Changes related to
- - Sabre DAC
- - LIRC installation
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - kit1cat - 04-16-2019
(04-16-2019, 10:27 AM)rikardo1979 Wrote: Some changes in install for new moOde 5.x versions. Please read first page in this thread
Changes related to
- - Sabre DAC
- - LIRC installation
Thanks Richard, just trying a install now. Might skip LIRC for the moment, I am now using a amp with remote for volume and mute, so volume set to disable.
RE: AUDIOPHONICS RaspDAC Mini Kit - I-Sabre ES9038Q2M - rikardo1979 - 04-16-2019
(04-16-2019, 10:51 AM)kit1cat Wrote:(04-16-2019, 10:27 AM)rikardo1979 Wrote: Some changes in install for new moOde 5.x versions. Please read first page in this thread
Changes related to
- - Sabre DAC
- - LIRC installation
Thanks Richard, just trying a install now. Might skip LIRC for the moment, I am now using a amp with remote for volume and mute, so volume set to disable.
keeping IR in place just cos can switch to SPDIF and also good for basic stop/play or skip tracks.
The volume I keeping HW control in settings but have it to 100 all the time and use volume on my Sugden amp