Moode Forum
[SOLVED] Local input active - Printable Version

+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Local input active (/showthread.php?tid=6717)



Local input active - guyfletch - 07-15-2024

Recently set up Moode on a Pi5 to play my music locally, and I'm mostly loving it, but I've now run into an issue and I'm wondering what the solution is.

When I load the Moode UI, all I can see is "Local input active:" with buttons to "Input select" or "Audio info".

Clicking input select gets me into the config menu, which I can click around and change things, but if I try to go to the index or pause/play the music etc, I'm thrown straight back to the "Local input active:" screen.

The last thing I changed was moving some music from the USB memory to the SD card so I don't have to leave the USB stick plugged in the whole time - wondering if Moode is still looking for files in the old locations?

Startup log looks fine until down at the end it says "genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache", the whole log is below for completeness' sake.

Any help appreciated.



Code:
M O O D E   S T A R T U P   L O G

20240715 095322 worker: --
20240715 095322 worker: -- Start moOde 9 series
20240715 095322 worker: --
20240715 095322 worker: Successfully daemonized
20240715 095322 worker: Wait for Linux startup
20240715 095328 worker: Linux startup complete
20240715 095328 worker: Boot config is ok
20240715 095328 worker: Session loaded
20240715 095329 worker: Package locks applied
20240715 095330 worker: File check complete
20240715 095330 worker: Debug logging off
20240715 095330 worker: --
20240715 095330 worker: -- System
20240715 095330 worker: --
20240715 095330 worker: Host name:     moode
20240715 095330 worker: RPi model:     Pi-5B 1.0 8GB
20240715 095330 worker: moOde release: 9.0.3 2024-06-23
20240715 095330 worker: RaspiOS:       12.5 Bookworm 64-bit
20240715 095330 worker: Linux Kernel:  6.6.31 64-bit
20240715 095330 worker: MPD version:   0.23.14
20240715 095330 worker: User id:       guy
20240715 095330 worker: Home folder:   /home/guy
20240715 095330 worker: Time zone:     Europe/London
20240715 095330 worker: Kbd layout:    gb
20240715 095330 worker: HDMI ports(s): on
20240715 095330 worker: Sys LED0:      on
20240715 095330 worker: Sys LED1:      on
20240715 095330 worker: Reduce power:  off
20240715 095330 worker: CPU governor:  ondemand
20240715 095330 worker: Integ audio:   vc4-kms-v3d
20240715 095330 worker: --
20240715 095330 worker: -- Network
20240715 095330 worker: --
20240715 095330 worker: Eth0
20240715 095330 worker: Ethernet: adapter exists
20240715 095330 worker: Ethernet: timeout off
20240715 095330 worker: Ethernet: address not assigned
20240715 095330 worker: Wlan0
20240715 095330 worker: Wireless: adapter exists
20240715 095330 worker: Wireless: country GB
20240715 095330 worker: Wireless: SSID    Puck
20240715 095330 worker: Wireless: other   None
20240715 095330 worker: Wireless: timeout up to 90 secs
20240715 095330 worker: Wireless: connect to Puck
20240715 095330 worker: Wireless: method  dhcp
20240715 095330 worker: Wireless: address 192.168.1.190
20240715 095331 worker: Wireless: netmask 255.255.255.0
20240715 095331 worker: Wireless: gateway 192.168.1.254
20240715 095331 worker: Wireless: pri DNS 192.168.1.254
20240715 095331 worker: Wireless: domain  home
20240715 095331 worker: --
20240715 095331 worker: -- File sharing
20240715 095331 worker: --
20240715 095331 worker: SMB file sharing:  off
20240715 095331 worker: NFS file sharing:  off
20240715 095331 worker: DLNA file sharing: off
20240715 095331 worker: --
20240715 095331 worker: -- Special configs
20240715 095331 worker: --
20240715 095331 worker: Plexamp:          not installed
20240715 095331 worker: RoonBridge:       not installed
20240715 095331 worker: Allo Piano 2.1:   not detected
20240715 095331 worker: Allo Boss 2:      not detected, OLED script ok
20240715 095331 worker: IQaudIO AMP*:     not detected
20240715 095331 worker: --
20240715 095331 worker: -- ALSA debug
20240715 095331 worker: --
20240715 095331 worker: Cards:  0:vc4hdmi0        1:vc4hdmi1        2:empty           3:empty          
20240715 095331 worker:         4:empty           5:empty           6:empty           7:empty          
20240715 095331 worker: Mixers: 0:none            1:none            2:none            3:none            
20240715 095331 worker:         4:none            5:none            6:none            7:none            
20240715 095331 worker: --
20240715 095331 worker: -- Audio configuration
20240715 095331 worker: --
20240715 095331 worker: Audio device:  0:Pi HDMI 1
20240715 095331 worker: ALSA card:     has not been reassigned
20240715 095331 worker: MPD config:    updated (iec958 device)
20240715 095331 worker: ALSA output:   HDMI
20240715 095331 worker: ALSA mode:     IEC958 (iec958)
20240715 095331 worker: ALSA mixer     PCM
20240715 095334 worker: ALSA volume:   controller not detected
20240715 095334 worker: ALSA maxvol:   100%
20240715 095334 worker: ALSA loopback: off
20240715 095334 worker: MPD mixer      Software
20240715 095334 worker: Audio formats: Alsacap was unable to detect formats
20240715 095334 worker: CamillaDSP:    off
20240715 095334 worker: CDSP volume:   0dB
20240715 095334 worker: CDSP volrange: 60dB
20240715 095334 worker: --
20240715 095334 worker: -- MPD startup
20240715 095334 worker: --
20240715 095334 worker: MPD service:        started
20240715 095334 worker: MPD port 6600:      accepting connections
20240715 095334 worker: MPD ALSA Default:   off
20240715 095334 worker: MPD ALSA Bluetooth: on
20240715 095334 worker: MPD HTTP Server:    off
20240715 095334 worker: MPD volume:         12
20240715 095334 worker: Saved MPD vol:      -1
20240715 095334 worker: Saved SRC vol:      0
20240715 095334 worker: MPD crossfade:      off
20240715 095334 worker: MPD ignore CUE:     no
20240715 095334 worker: MPD CDSP volsync:   off
20240715 095334 worker: --
20240715 095334 worker: -- Music sources
20240715 095334 worker: --
20240715 095334 worker: USB drive:      BLISSOS-14_
20240715 095334 worker: NAS sources:    no music sources defined
20240715 095334 worker: --
20240715 095334 worker: -- Feature availability
20240715 095334 worker: --
20240715 095334 worker: Input select:    available, Source: MPD, Output: Pi HDMI 1
20240715 095336 worker: Bluetooth:       started, PIN: None, ALSA/CDSP maxvol: 100%/0dB, ALSA outmode: Standard
20240715 095336 worker: AirPlay:         available
20240715 095336 worker: Spotify Connect: available
20240715 095336 worker: Squeezelite:     available
20240715 095336 worker: UPnP client:     available
20240715 095336 worker: Plexamp:         not installed
20240715 095336 worker: RoonBridge:      not installed
20240715 095336 worker: Multiroom:       available
20240715 095336 worker: GPIO buttons:    available
20240715 095336 worker: HTTPS mode:      available
20240715 095336 worker: Stream recorder: n/a
20240715 095336 worker: --
20240715 095336 worker: -- Peripherals
20240715 095336 worker: --
20240715 095336 worker: Local display:   off
20240715 095336 worker: On-screen kbd:   off
20240715 095336 worker: HDMI 4K 60Hz:    off
20240715 095336 worker: Rotary encoder:  off
20240715 095336 worker: USB volume knob: off
20240715 095336 worker: LCD updater:     off
20240715 095336 worker: --
20240715 095336 worker: -- Miscellaneous
20240715 095336 worker: --
20240715 095336 worker: Software update:   Automatic check off
20240715 095336 worker: Auto-CoverView:    off
20240715 095336 worker: CoverView timeout: Never
20240715 095336 worker: Auto-shuffle:      off
20240715 095336 worker: Auto-play:         off
20240715 095336 worker: Web SSH server:    on
20240715 095336 worker: Maintenance task:  360 mins
20240715 095336 worker: Current view:      reset to Playback
20240715 095336 worker: Active flags:      at least one true
20240715 095336 worker: Reset flags:       all reset to false
20240715 095336 worker: MPD volume:        set to 0
20240715 095336 worker: Active flags:      all false
20240715 095336 worker: Reset flags:       skipped
20240715 095336 worker: Session check:     ok
20240715 095336 worker: --
20240715 095336 worker: -- Startup complete
20240715 095336 worker: --
20240715 095336 worker: Mount monitor:    started
20240715 095336 worker: Radio monitor:    off
20240715 095336 worker: Watchdog monitor: started
20240715 095336 worker: Responsiveness:   Default
20240715 095336 worker: Ready
20240715 095356 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095409 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095415 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095419 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095429 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095434 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095439 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095630 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache
20240715 095709 genLibraryUTF8Rep(): Error: file create failed: /var/local/www/libcache



RE: Local input active - Tim Curtis - 07-15-2024

Looks like somehow things got broken. Did you ever configure a Hifiberry DAC+ ADC or Audiophonics 9028/9038 DAC and use the Input Select feature?

The log entries below indicate that a "renderer active" flag is true during startup which is an abnormal condition and so the flag gets reset. It's prolly the "input source active" flag but in your system even after the flag is reset whatever breakage is present is causing it to be set to an active state again.

Code:
20240715 095336 worker: Active flags:      at least one true
20240715 095336 worker: Reset flags:       all reset to false

It's not obvious to me how this could happen so IMO your best bet is to start with a fresh 9.0.4 image.


RE: Local input active - guyfletch - 07-16-2024

(07-15-2024, 01:05 PM)Tim Curtis Wrote: Looks like somehow things got broken. Did you ever configure a Hifiberry DAC+ ADC or Audiophonics 9028/9038 DAC and use the Input Select feature?

The log entries below indicate that a "renderer active" flag is true during startup which is an abnormal condition and so the flag gets reset. It's prolly the "input source active" flag but in your system even after the flag is reset whatever breakage is present is causing it to be set to an active state again.

Code:
20240715 095336 worker: Active flags:      at least one true
20240715 095336 worker: Reset flags:       all reset to false

It's not obvious to me how this could happen so IMO your best bet is to start with a fresh 9.0.4 image.

Nuclear option, huh? Ok, pity, now I've put a bunch of music on the SD I was hoping to keep it there, but I can start over if that's the easiest way to a working system.

Thanks Tim.


RE: Local input active - guyfletch - 07-16-2024

Ok, now up and running with local files and no weirdness. I'll keep an eye on it, but hopefully all good from here on out. Thanks for the support.