+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: Audiophile (https://moodeaudio.org/forum/forumdisplay.php?fid=32)
+--- Forum: Audio gear (https://moodeaudio.org/forum/forumdisplay.php?fid=10)
+--- Thread: DIY Streamer build with screen (/showthread.php?tid=6782)
Pages:
1
2
DIY Streamer build with screen - Mattt - 08-02-2024
I'd like to build a streamer with a screen in a nice aluminium case.
I'm quite capable of following instructions but would have no hope of fashioning one myself without them.
I've done a fair bit of searching and have only managed to find things that aren't available anymore or don't have a list of components and/or build instructions.
Something like the attached pic would be perfect.
RE: DIY Streamer build with screen - hifinet - 08-02-2024
One that I have seen here with more info at diyAudio is the Stealth V3. It looks very nice. No experience with it.
RE: DIY Streamer build with screen - Mattt - 08-03-2024
(08-02-2024, 11:55 PM)hifinet Wrote: One that I have seen here with more info at diyAudio is the Stealth V3. It looks very nice. No experience with it.
Yeah that looks nice. Pricey though, I could buy a Wiim ultra for less.
RE: DIY Streamer build with screen - hifinet - 08-03-2024
Why a fixed touch display, when an Android tablet such as a Fire is less expensive than the touch display and can be used remotely to control the steamer?
RE: DIY Streamer build with screen - Mattt - 08-03-2024
(08-03-2024, 05:12 AM)hifinet Wrote: Why a fixed touch display, when an Android tablet such as a Fire is less expensive than the touch display and can be used remotely to control the steamer?
I just like the look. I'm unlikely to actually use the touch screen to control it 99% of the time.
RE: DIY Streamer build with screen - new_bloke - 08-05-2024
I don't know where you're based (and therefore what shipping options are/are not available), but how about this?
https://www.audiophonics.fr/en/boitiers-diy-boitiers-divers/rasptouch-rpi4-black-chassis-and-accessories-kit-diy-p-11248.html
Alternatively, they have lots of diy chassis that you could use and get a custom front panel made up for your screen of choice.
RE: DIY Streamer build with screen - Tim Curtis - 08-05-2024
If you want the clean look of a super nice screen and are willing to thrift the enclosure then consider the following config. All components are mounted behind the screen, no wires showing.
10" WIMAXIT IPS display $77
https://www.amazon.com/dp/B09QPWRCB1?ref=ppx_yo2ov_dt_b_product_details&th=1
Pi-5 $69
https://www.amazon.com/Raspberry-4GB-Single-Board-Computer/dp/B0CRNB5PQ9/ref=sr_1_25?crid=W4LG6O6HB9DI&dib=eyJ2IjoiMSJ9.TzIAlcap-JN7BzO8wHpHCfXUvdypn7l9ZuqL4m4_AwKJu85jTicqIrdnfmWbL9sqVbT3pC1E24MWinvuzHVZB4q1XeWos4JERwYFHVQhkUxjU1yaDGMJERHlFk3DTWVuIaRreJBUUVJB4P-B788tXPfMT1pkWHU2V_zPecOIEeclFD1po4xcDgPU08BO0_WbOSnzoGCf-4FS2sXpUQSfP4CSzpeDlAFm1txtnbPupwNczH-e1bjFkBAb-B3NADuN2pknHJjQvC9j7zHpLdds1G0bPuTzT-fg1sqvU7mv8dQ.8gg6sJ-LILOCTCkIC_Ye1OEgINavq9DzRHhmh-LMNQ4&dib_tag=se&keywords=raspberry+pi+5&qid=1722855484&s=electronics&sprefix=raspberry+pi+%2Celectronics%2C248&sr=1-25
Active cooler $8
https://www.amazon.com/Raspberry-Pi-Active-Cooler/dp/B0CLXZBR5P/ref=sr_1_3?crid=3USHRQMVIPT3C&dib=eyJ2IjoiMSJ9.yxdTGmMffH2iJhveQSAPuKuvTp6JkPqLJ7_Ao0Ya8mmn0Pdlj5LHijVUq-sFgo1UTzRARaQh7ZKWFTlBgajCTUS0vGbzdOUJmU5ndyEuBF75IbTD0vsH3Mu1d24qR6wvBis5mNG1pkc92o7tJQ5_jeAcbsjwtdWkfizduYG7aNxFZDDwXcZqISYMixACQOAx70lAbpYg3JhazkD_EbJp2vZoE3vlxwkd5_x149gYfH2CTPicLIQi6kyJ3vdjlnb13OakXPTXXFgmfv43yvn8BKk5RRF-r_IuC2o7aXRk26A.8elUCBocC5HiBvJB_eFgD07jK0WXU4KzeGLeVDRdFMU&dib_tag=se&keywords=raspberry+pi+5+cooler&qid=1722855636&s=electronics&sprefix=raspberry+pi+5+coole%2Celectronics%2C555&sr=1-3
Power supply $20
https://www.amazon.com/XYGStudy-Official-USB-C-Supply-Raspberry/dp/B0CQV29QSX/ref=sr_1_3_pp?crid=27BBXO7H4FQNU&dib=eyJ2IjoiMSJ9.AIdxZFc5tMLjKfCV9BEe403XELKsVK5ndYzxw68q3PaDaAeagjnlL08eF3rFCFmtIBqJ-X81jw0RsT5dSVvYUi9GfRNb2AaWnnFhbmiZTFahUAhmgYMZYoK9ZIAyYVPo6hxlhEAqpBVaF5n9SP57YYyJK72GZlr8o_iuFASpCrV9vs-TVECel0pxu_NIf4aTJRRoBtjnjCXmiPbC9a-9EHWVWX4c8z3UEU5is2UvpPXgUfo2DhC7fKr6lWI4bPODa048c9eCx8RPXj2IvZZDw31GomyhqRUxDLImnBIPLR8.9i7DzMxV3Q575fX1P_1mD1-qI3nSnzc-MoVM6ZgYoFM&dib_tag=se&keywords=raspberry+pi+5+power+supply&qid=1722855746&s=electronics&sprefix=raspberry+pi+5power+supply%2Celectronics%2C194&sr=1-3
A high quality stereo DAC (IQaudIO DAC Pro) $25
https://www.pishop.us/product/iqaudio-dac-pro/
RE: DIY Streamer build with screen - TheOldPresbyope - 08-05-2024
Good BoM that would result in a decent, affordable system.
That's a nice display --- wish it had been available when I was first fooling around with local display but I went with the comparably priced official 7-in touch display.
Reading the Amazon page for the WIMAXIT almost made coffee come out my nose: "This raspberry pi screen with a 3.5mm headphone jack and dual DIY speakers on the back brings you an excellent audio experience ..." Talk about marketing hype.
Regards,
Kent
RE: DIY Streamer build with screen - Tim Curtis - 08-05-2024
lol, the bass is incredible ;-)
RE: DIY Streamer build with screen - goodjob - 08-24-2024
My last audio streamer was an Insignia Infocast 8" that I flashed with Chumby software. That was seventeen years ago, now it is just a fancy alarm clock. I came across this site recently and found this thread; it is time to give this software a try using Tim's ingredients, will see how it goes. Thanks Tim!