+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: FAQ and Guides (https://moodeaudio.org/forum/forumdisplay.php?fid=9)
+--- Thread: [How to do instruction] 9.0.6 on Pi 4B, 3B+, Zero 2W (/showthread.php?tid=6833)
9.0.6 on Pi 4B, 3B+, Zero 2W - thomaschan - 08-19-2024
I am currently running 9.0.6 on Pi 4B with DIY TDA1387 x 8 DAC and am very satisfied with the performance. I am wondering how it compares to running on 3B+ and Zero 2W.
RE: 9.0.6 on Pi 4B, 3B+, Zero 2W - the_bertrum - 08-19-2024
I run a two 4b, and a 3a. I also ran on a zero for many years before 32bit died
.In general playback, I see no performance difference. Updating the software or rebuilding the library are slower on the lower powered devices, but the difference between a 4 on ethernet and a 4 on wifi is bigger than the difference between a 4 and a 3 for example.
In short, performance is fine
9.0.6 on Pi 4B, 3B+, Zero 2W - thomaschan - 08-19-2024
(08-19-2024, 07:17 AM)the_bertrum Wrote: I run a two 4b, and a 3a. I also ran on a zero for many years before 32bit died
In general playback, I see no performance difference. Updating the software or rebuilding the library are slower on the lower powered devices, but the difference between a 4 on ethernet and a 4 on wifi is bigger than the difference between a 4 and a 3 for example.
In short, performance is fine
Thanks. I'll probably try the Zero 2W first.
RE: 9.0.6 on Pi 4B, 3B+, Zero 2W - PJVervoorn - 08-20-2024
I use the Z2W with Camilla DSP and a library of 1000+ CDs, without any issues.
Another option would be the 3A+, that is also a low power device but has better performance *and* it fits full size HATs.