+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: Moode Equalizer Settings (/showthread.php?tid=6865)
Moode Equalizer Settings - johnryder42 - 08-31-2024
Hi--
Moode says its equalizers are supported by "inbound renderers." Does this mean that if I am using a hardware volume setting, that this will bypass the moode equalizers?
Thank you!
RE: Moode Equalizer Settings - Tim Curtis - 08-31-2024
Here's the help text for Volume type. It's only used by MPD. All other audio renderers for example AirPlay, Bluetooth etc use their own software volume volume routines.
Code:
Volume type used by MPD.
- Hardware: Audio device on-chip volume controller.
- Software: MPD software volume (32 bit float with dither).
- Fixed (0dB): Output 100% volume. Assumes a downstream volume control is used.
- CamillaDSP: CamillaDSP software volume (64 bit float with dither).
Set volume to a low level before changing these options.Here's the help text for the EQ's. Inbound refers to just the Bluetooth renderer.
Code:
The Equalizers are supported by MPD, AirPlay, Spotify and Bluetooth inbound renderers. They are not available if Bluetooth audio output is set to "Bluetooth speaker" or Multiroom Sender or Receiver are On. Note that the Equalizers, Crossfeed, and Polarity inversion are mutually exclusive. Enabling one will disable the others.RE: Moode Equalizer Settings - johnryder42 - 08-31-2024
Hi Tim, thank you for your fast response.
I now understand the connection between volume type and the equalizer.
Regards,
John