+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: New install 9.1.2 with Allo Piano 2.1 DAC hat (/showthread.php?tid=6978)
New install 9.1.2 with Allo Piano 2.1 DAC hat - errcl65 - 10-09-2024
After selecting the Allo Piano 2.1 DAC and the rebooting, Moode no longer accessible
via web. I can ssh in.
What logs can I check to see what went wrong? Or is there an issue with Piano 2.1
with current kernel?
RE: New install 9.1.2 with Allo Piano 2.1 DAC hat - Tim Curtis - 10-09-2024
Reboot and then post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.
RE: New install 9.1.2 with Allo Piano 2.1 DAC hat - errcl65 - 10-09-2024
Bookworm driver issue. Can't start the driver. I have to pull the logs. I kinds of remeber
someone has this problem. I think it is a bookworm problem and not a Moode problem.
I went to the 32 bit 8.3.9 release and it works as it should. Works fine, configured
with Kali clock and in Dual Mono.
RE: New install 9.1.2 with Allo Piano 2.1 DAC hat - frank2908 - 12-05-2024
I have the same issue and this works for me. But now my volt amp connected to piano make loud hiss and there is no audio.
Also is there any fix for this in the leatest release?
RE: New install 9.1.2 with Allo Piano 2.1 DAC hat - Tim Curtis - 12-05-2024
(12-05-2024, 11:02 AM)frank2908 Wrote: I have the same issue and this works for me. But now my volt amp connected to piano make loud hiss and there is no audio.
Also is there any fix for this in the leatest release?
Reboot and then post the contents of the startup log.
The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output.