![]() |
Micro%@#! update - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: Micro%@#! update (/showthread.php?tid=7671) |
Micro%@#! update - michelg - 04-24-2025 Hello, I stream on Pi4, also from time to time on Linux or Chrome and Micro#$%# Since yesterday all but Pi do not output any sound despite settings and streamoind data identical across all platform. To add insult to injury RME ADI 2 DAC divers have disapeared and cannot re-install. Any suggestions? Thank you RE: Micro%@#! update - Tim Curtis - 04-24-2025 Reboot and then post the entire contents of the startup log. The log can be viewed via the SSH command moodeutl -l or downloaded via the Logs section in System Config, or via Menu, System info from any of the Config screens. The startup log will be at the end of System info output. RE: Micro%@#! update - Nutul - 04-24-2025 (04-24-2025, 03:52 PM)michelg Wrote: (...) all but Pi do not output any sound (...)I may be wrong, but doesn't this mean: The Pi plays fine, while ALL OTHER DEVICES do not...? So, what's the point? RE: Micro%@#! update - michelg - 04-25-2025 (04-24-2025, 04:08 PM)Tim Curtis Wrote: Reboot and then post the entire contents of the startup log. Hi TIm, Thanks for your reply, 1) I could not download of the files as I keep getting a "please match the requested format" pop up for host/player name. It is the same as the player and the same on the network but no matter what I keep getting this message. I tried a reset and keep getting a "upload file" pop up and windows won't allow me to. 2) I pulled the card and copied the txt files 3) there is a .REC file which has bunch of "nuls" and "y"s at the end (could not copy them) Thanks again for your help CONFIG.TXT ######################################### # This file is managed by moOde ######################################### # Device filters [cm4] otg_mode=1 [pi4] hdmi_force_hotplug:0=1 hdmi_force_hotplug:1=1 hdmi_enable_4kp60=0 [all] dtoverlay=vc4-kms-v3d max_framebuffers=2 display_auto_detect=1 disable_fw_kms_setup=1 arm_64bit=1 # General settings arm_boost=0 disable_splash=1 disable_overscan=1 hdmi_drive=2 hdmi_blanking=1 hdmi_force_edid_audio=1 hdmi_force_hotplug=1 hdmi_group=0 dtparam=i2c_arm=on dtparam=i2s=on dtparam=audio=on # Do not alter this section # Integrated adapters #dtoverlay=disable-bt #dtoverlay=disable-wifi # Audio overlays #dtoverlay=none #dtoverlay=force_eeprom_read=0 # PCI Express #dtparam=pciex1 #dtparam=pciex1_gen=3 # Pi Touch1 #dtoverlay=vc4-kms-dsi-7inch,invx,invy # Fan speed #dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75 \\\\\\\\\\ CMDLINE.TXT console=serial0,115200 console=tty1 root=PARTUUID=2d889092-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=CA \\\\\\\\\\ ISSUE.TXT Raspberry Pi reference 2024-12-30 Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 6fb311e7fb57b4e7980ae3270c25b569b19dfe8f, stage3 \\\\\\\\\\\ ######################################### # This file is managed by moOde ######################################### # Device filters [cm4] otg_mode=1 [pi4] hdmi_force_hotplug:0=1 hdmi_force_hotplug:1=1 hdmi_enable_4kp60=1 [all] dtoverlay=vc4-kms-v3d max_framebuffers=2 display_auto_detect=1 disable_fw_kms_setup=1 arm_64bit=1 # General settings arm_boost=0 disable_splash=1 disable_overscan=1 hdmi_drive=2 hdmi_blanking=1 hdmi_force_edid_audio=1 hdmi_force_hotplug=1 hdmi_group=0 dtparam=i2c_arm=on dtparam=i2s=on dtparam=audio=on # Do not alter this section # Integrated adapters #dtoverlay=disable-bt #dtoverlay=disable-wifi # Audio overlays dtoverlay=hifiberry-digi-pro dtoverlay=force_eeprom_read=0 # PCI Express #dtparam=pciex1 #dtparam=pciex1_gen=3 # Pi Touch1 #dtoverlay=vc4-kms-dsi-7inch,invx,invy # Fan speed #dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75 ######################################### # This file is managed by moOde ######################################### # Device filters [cm4] otg_mode=1 [pi4] hdmi_force_hotplug:0=1 hdmi_force_hotplug:1=1 hdmi_enable_4kp60=1 [all] dtoverlay=vc4-kms-v3d max_framebuffers=2 display_auto_detect=1 disable_fw_kms_setup=1 arm_64bit=1 # General settings arm_boost=0 disable_splash=1 disable_overscan=1 hdmi_drive=2 hdmi_blanking=1 hdmi_force_edid_audio=1 hdmi_force_hotplug=1 hdmi_group=0 dtparam=i2c_arm=on dtparam=i2s=on dtparam=audio=on # Do not alter this section # Integrated adapters #dtoverlay=disable-bt #dtoverlay=disable-wifi # Audio overlays dtoverlay=hifiberry-digi-pro dtoverlay=force_eeprom_read=0 # PCI Express #dtparam=pciex1 #dtparam=pciex1_gen=3 # Pi Touch1 #dtoverlay=vc4-kms-dsi-7inch,invx,invy # Fan speed #dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75 ######################################### # This file is managed by moOde ######################################### # Device filters [cm4] otg_mode=1 [pi4] hdmi_force_hotplug:0=1 hdmi_force_hotplug:1=1 hdmi_enable_4kp60=1 [all] dtoverlay=vc4-kms-v3d max_framebuffers=2 display_auto_detect=1 disable_fw_kms_setup=1 arm_64bit=1 # General settings arm_boost=0 disable_splash=1 disable_overscan=1 hdmi_drive=2 hdmi_blanking=1 hdmi_force_edid_audio=1 hdmi_force_hotplug=1 hdmi_group=0 dtparam=i2c_arm=on dtparam=i2s=on dtparam=audio=on # Do not alter this section # Integrated adapters #dtoverlay=disable-bt #dtoverlay=disable-wifi # Audio overlays dtoverlay=hifiberry-digi-pro dtoverlay=force_eeprom_read=0 # PCI Express #dtparam=pciex1 #dtparam=pciex1_gen=3 # Pi Touch1 #dtoverlay=vc4-kms-dsi-7inch,invx,invy # Fan speed #dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75 ######################################### # This file is managed by moOde ######################################### # Device filters [cm4] otg_mode=1 [pi4] hdmi_force_hotplug:0=1 hdmi_force_hotplug:1=1 hdmi_enable_4kp60=1 [all] dtoverlay=vc4-kms-v3d max_framebuffers=2 display_auto_detect=1 disable_fw_kms_setup=1 arm_64bit=1 # General settings arm_boost=0 disable_splash=1 disable_overscan=1 hdmi_drive=2 hdmi_blanking=1 hdmi_force_edid_audio=1 hdmi_force_hotplug=1 hdmi_group=0 dtparam=i2c_arm=on dtparam=i2s=on dtparam=audio=on # Do not alter this section # Integrated adapters #dtoverlay=disable-bt #dtoverlay=disable-wifi # Audio overlays dtoverlay=hifiberry-digi-pro dtoverlay=force_eeprom_read=0 # PCI Express #dtparam=pciex1 #dtparam=pciex1_gen=3 # Pi Touch1 #dtoverlay=vc4-kms-dsi-7inch,invx,invy # Fan speed #dtparam=fan_temp0=50000,fan_temp0_hyst=5000,fan_temp0_speed=75 RE: Micro%@#! update - michelg - 04-26-2025 Hi Tim, I reinstalled Moode and all is working fine now. Thanks RE: Micro%@#! update - Tim Curtis - 04-26-2025 (04-26-2025, 08:30 PM)michelg Wrote: Hi Tim, Glad its working :-) |