+- Moode Forum (https://moodeaudio.org/forum)
+-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3)
+--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7)
+--- Thread: [SOLVED] Allo 2.1 and Kali..wth? (/showthread.php?tid=911)
Pages:
1
2
Allo 2.1 and Kali..wth? - DRONE7 - 01-17-2019
Have a piano 2.1 and pi 3 working fine... added Kali and now no output at all...
Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...
Changed config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....
anyone care to share their working config...?
EDIT brand new install and same problem.....No Output....wtf ...
Code:
Audio Information
INPUT PROCESSING
Source: http://5.152.208.98:8058
Encoded at: VBR compression
Decoded to: 24 bit, 44.1 kHz, Stereo, 128 kbps
DSP OPERATIONS
Resampling: 32 bit, * kHz, Stereo (SoX very high quality)
Crossfeed: off
Equalizer: Graphic EQ: (off), Parametric EQ: (off}
Crossfade: 0 seconds
Other: Volume normalize (no}, Replaygain (off)
Chip options: FIR interpolation with de-emphasis, gain=0 dB, boost=0 dB
Volume ctl: Software (MPD 32-bit float with dither)
OUTPUT STREAM
Destination: Local
Encoded at: 32 bit, 44.1 kHz, Stereo, 2.822 mbps
AUDIO DEVICE
Device: Allo Piano 2.1 Hi-Fi DAC
Chip: Burr Brown PCM5142
Interface: I2S
S Y S T E M P A R A M E T E R S
Date and time = 2019-01-17 20:36:49
System uptime = up 6 minutes
Timezone = Pacific/Auckland
moOde = Release 4.4 2018-12-09
Host name = moode
ETH0 IP = 192.168.1.22
ETH0 MAC = b8:27:eb:ee:a9:40
WLAN0 IP = unassigned
WLAN0 MAC = no adapter
WiFi country = US
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.14.84-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 7.3G
ROOT used = 29%
ROOT avail = 5.0G
FS expand = expanded
MEM free = 708 MB
MEM used = 57 MB
Temperature = 49.4°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = Off
P3-BT = Off
HDMI = Off
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = Off
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 0.63 0.38 99.00
0 2.01 0.00 97.99
1 0.51 0.00 99.49
2 0.00 1.49 98.51
3 0.00 0.00 100.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
29 - mpd 2.6 2 2.2
19 - sysinfo.sh 0.2 0 1.6
19 - systemd 0.6 0 0.5
19 - kworker/0:1 0.0 0 0.3
19 - php-fpm7.0 1.4 1 0.3
19 - sudo 0.3 3 0.3
19 - worker.php 1.2 0 0.2
19 - systemd-journal 0.4 1 0.1
19 - systemd-udevd 0.3 1 0.1
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 200 MHz
h264 = 300 MHz pixel = 0 MHz
isp = 300 MHz vec = 0 MHz
v3d = 300 MHz hdmi = 0 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.3000V
sdram controller = 1.2000V
sdram I/O = 1.2000V S Y S T E M P A R A M E T E R S
Date and time = 2019-01-17 20:36:49
System uptime = up 6 minutes
Timezone = Pacific/Auckland
moOde = Release 4.4 2018-12-09
Host name = moode
ETH0 IP = 192.168.1.22
ETH0 MAC = b8:27:eb:ee:a9:40
WLAN0 IP = unassigned
WLAN0 MAC = no adapter
WiFi country = US
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.14.84-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 7.3G
ROOT used = 29%
ROOT avail = 5.0G
FS expand = expanded
MEM free = 708 MB
MEM used = 57 MB
Temperature = 49.4°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = Off
P3-BT = Off
HDMI = Off
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = Off
LED0 = onCode:
pi@moode:~ $ ./piano.sh
Dual mode: Dual-Mono
Subw mode: None
Sub xover: 60
Sub level: 81%
Main levl: 100%
Mstr levl: 100%
pi@moode:~ $RE: Allo 2.1 and Kali..wtf? - jonners - 01-17-2019
It's a while since I had this setup. I guess you've tried with no resampling?
RE: Allo 2.1 and Kali..wtf? - DRONE7 - 01-17-2019
(01-17-2019, 11:23 AM)jonners Wrote: It's a while since I had this setup. I guess you've tried with no resampling?
Hiya jonners,
Yes i recall you had a number of posts here and at DIY-audio re this combo... seemed to work fine for you.....
Tried with and without resampling...
Very odd as MoOde is performing fine.... works with Piano 2.1 dac.... but as soon as I install Kali audio output stops although all displays and alsa show through-put as if working correctly...
RE: Allo 2.1 and Kali..wtf? - jonners - 01-17-2019
Have you tried other modes apart from dual mono?
RE: Allo 2.1 and Kali..wtf? - ear5142 - 01-17-2019
I also had no sound with Kali. I experimented with glb_mclk, and rebooted Moode - the sound appeared until the next reboot or shutdown. The point is in DIP switches on Piano or Kali, I can see later at home.
RE: Allo 2.1 and Kali..wtf? - Hiroyuki - 01-17-2019
(01-17-2019, 06:40 AM)DRONE7 Wrote: Have a piano 2.1 and pi 3 working fine... added Kali and now no output at all...I have no prob. this is exact the same hardware config with me.
Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...
Changed config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....
anyone care to share their working config...?
EDIT brand new install and same problem.....No Output....wtf ...
https://gyazo.com/c99f756cc82ad85f465b65104a386bef
and,
glb_mclk enabled, upsampling 32/*, dual mono
https://gyazo.com/4b6dcf7f8833a0584cc84c88b4981978
https://gyazo.com/b604f912ecba1425dae6ec407882c3b6
i encountered sometime left(or right) channel has no sound. i powered off/on (not reboot) and it resumed.
RE: Allo 2.1 and Kali..wtf? - Hiroyuki - 01-17-2019
(01-17-2019, 01:29 PM)Hiroyuki Wrote:(01-17-2019, 06:40 AM)DRONE7 Wrote: Have a piano 2.1 and pi 3 working fine... added Kali and now no output at all...I have no prob. this is exact the same hardware config with me.
Everything seems to work as expected...Kali shows blue lights ..... piano powers up and various i2c displays confirm files are playing.... but they're not making wonderful noise ...
Changed config to include glb_mclk Enabled and rebooted, cleared cache, checked alsa... still no output.....
So far this is the worst purchase ever.... everything else I've added to the Pi worked ootb or a google fixed it but this is just unfathomable....
anyone care to share their working config...?
EDIT brand new install and same problem.....No Output....wtf ...
https://gyazo.com/c99f756cc82ad85f465b65104a386bef
and,
glb_mclk enabled, upsampling 32/*, dual mono
https://gyazo.com/4b6dcf7f8833a0584cc84c88b4981978
https://gyazo.com/b604f912ecba1425dae6ec407882c3b6
i encountered sometime left(or right) channel has no sound. i powered off/on (not reboot) and it resumed.
Do you power +5v and enough A to Kali?
RE: Allo 2.1 and Kali..wtf? - jonners - 01-17-2019
It's beginning to look like a problem with the DRONE7 Kali.
I've found Allo's customer service to be very good. They may be a bit snowed under with Katana problems atm.
RE: Allo 2.1 and Kali..wtf? - DRONE7 - 01-17-2019
(01-17-2019, 01:28 PM)ear5142 Wrote: I also had no sound with Kali. I experimented with glb_mclk, and rebooted Moode - the sound appeared until the next reboot or shutdown. The point is in DIP switches on Piano or Kali, I can see later at home.
Yes, thanks!.
It would be helpful to know those settings. I have tried the kali with the dip in both positions to no avail and the piano is in rpi compatibility mode but maybe the other dip on the piano needs some adjustment...?
Though why it works on the pi but not on the kali eludes me...
"Do you power +5v and enough A to Kali? " Yes, powering the kali and the pi separately.
EDIT: Just trying everything here and when I set glb_mclk DISABLED I get output from the piano 2.1 !!!
So what's going on ? why sound with glb_mclk DISABLED and not with glb_mclk ENABLED ??
EDIT-2: So the dip switch on the piano 2.1 for rpi compatibility has to be set to OFF when using the kali and glb_mclk ENABLED and then it works !
How counter-intuitive is that then....
RE: Allo 2.1 and Kali..wtf? - ear5142 - 01-18-2019
(01-17-2019, 05:45 PM)DRONE7 Wrote:(01-17-2019, 01:28 PM)ear5142 Wrote: I also had no sound with Kali. I experimented with glb_mclk, and rebooted Moode - the sound appeared until the next reboot or shutdown. The point is in DIP switches on Piano or Kali, I can see later at home.
EDIT: Just trying everything here and when I set glb_mclk DISABLED I get output from the piano 2.1 !!!
So what's going on ? why sound with glb_mclk DISABLED and not with glb_mclk ENABLED ??
EDIT-2: So the dip switch on the piano 2.1 for rpi compatibility has to be set to OFF when using the kali and glb_mclk ENABLED and then it works !
How counter-intuitive is that then....
I apologize, yesterday I could not answer. We have come to the same results! How do you sound with Kali and Piano? I hear small clicks when moving to the next track and when adjusting the volume. And when adjusting the volume from 0 to 100 in some positions of the regulator, the sound in one channel disappears, you have to choose the position when both channels are working. Such on 4.3 and 4.4. Режим Dual mono. On PicorePlayer everything is fine.