[SOLVED] update/rescan not working after changing my usb-connected sd-card with audiofiles - Printable Version +- Moode Forum (https://moodeaudio.org/forum) +-- Forum: moOde audio player (https://moodeaudio.org/forum/forumdisplay.php?fid=3) +--- Forum: Support (https://moodeaudio.org/forum/forumdisplay.php?fid=7) +--- Thread: [SOLVED] update/rescan not working after changing my usb-connected sd-card with audiofiles (/showthread.php?tid=99) |
update/rescan not working after changing my usb-connected sd-card with audiofiles - tk0815 - 04-18-2018 Hi, with my fresh installed moode 4.1 on a new raspi3b+ and usb-dac chord mojo: - first I insert a usb-adapter with an sd-card (200GB) with audio files - with "update" moode adds the sd-card correctly, all fine, sound with cord mojo very good! - after switch to an other sd-card in the usb adapter (and reboot) the command "update" and "rescan" didnt work correctly - browse window shows old file structure, no audio file would be played, some commands dont react...., slow... are there others with similar problems? Thanks Thomas RE: update/rescan not working after changing my usb-connected sd-card with audiofiles - rikardo1979 - 04-18-2018 (04-18-2018, 11:11 AM)tk0815 Wrote: Hi, Why don't you plug both adapter same time and then scan files into library? You should not switch cards in adapter while running Always safely unplug and then reinsert RE: update/rescan not working after changing my usb-connected sd-card with audiofiles - Tim Curtis - 04-18-2018 (04-18-2018, 11:11 AM)tk0815 Wrote: Hi, Couple of questions: 1. Are u unplugging the USB adapter first and then replacing the SDCard or is the USB adapter left in place? 2. Do the SDCards have different disk labels? -Tim RE: update/rescan not working after changing my usb-connected sd-card with audiofiles - tk0815 - 04-21-2018 Hi, Thanks for your tips. I reinstalled everything and labeled the 200Gb USB SD card. Now it works wonderfully. Best regards |