Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


how to attach local drive
#1
Hello,
I would like to attach a 3T external hdd to the RPI running the MoOde.
I did tried with ext4 drive, but I see it does not automount it.

What is the "proper" way to do? Should I just connect it, mount it, will it show up under the library page?
Can I mount read only? Where should I mount it to?

Thanks a lot,
JG
Reply
#2
(09-05-2020, 11:35 AM)Giordano Wrote: Hello,
I would like to attach a 3T external hdd to the RPI running the MoOde.
I did tried with ext4 drive, but I see it does not automount it.

What is the "proper" way to do? Should I just connect it, mount it, will it show up under the library page?
Can I mount read only? Where should I mount it to?

Thanks a lot,
JG



Hello Giordano,

when I connect an HDD it is shown under Music.
Don't forget to update USB under Moode.
[attachment=1598] [attachment=1599] [attachment=1600]

Moode recognizes FAT32, NTFS etc .....

I'm using Moode 4.2 and it works without any problems
Ciao Zeferino
Reply
#3
Hello Cardone,
I have connected is, it is visible in /dev
( /dev/sda1                      3.6T  3.1T  405G  89% /media/zeneM )
but, under library I do not see USB at all.


In the config, I've tried both Devmon and Udisks-glue, but it does not come up.
It is mounted fine, under /media/zeneM and I can browse is, read it, write it (it ould be good to mount read only, but this is O.K. too), but it does not come up in the library.

I did tried the home button, the resfresh button. Did tried to reboot, but it just does not come up.
Or, am I missing something? Should I see it under library directly?

Thanks,
JG
Reply
#4
    Should I see it here?
Thanks,
JG
Reply
#5
Menu, Update library
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#6
(09-06-2020, 07:24 PM)Tim Curtis Wrote: Menu, Update library

but that updates every all , or not? A full update would run for ages. It should not be that I can only see the attached drive if I update everything.
Thanks,
JG
Reply
#7
(09-06-2020, 07:15 PM)Giordano Wrote: Should I see it here?
Thanks,
JG

Yes.

Have you looked at the moode log (/var/log/moode.log) and the MPD log (/var/log/mpd/log) to be sure that no errors were logged for this drive and that audio tracks were discovered on it?

Here's an example for one of my moOde players with a small-ish (120GB) SSD attached. I told MPD to regenerate the library and here's the beginning of output from that operation as well as the line for this drive shown by the mount command:

Code:
pi@moode64:~ $ more /var/log/mpd/log
Sep 06 15:24 : update: updating USB/MUSIC/JAZZ/Bob Schwartz Quartet-Look for the Silver Lining/04.O Grande Amor.flac
Sep 06 15:24 : update: updating USB/MUSIC/JAZZ/Bob Schwartz Quartet-Look for the Silver Lining/01.Youd Be So Nice To Come Home To.flac
Sep 06 15:24 : update: updating USB/MUSIC/JAZZ/Bob Schwartz Quartet-Look for the Silver Lining/02.With Your Hand In Mine.flac
Sep 06 15:24 : update: updating USB/MUSIC/JAZZ/Bob Schwartz Quartet-Look for the Silver Lining/03.Tadds DelightBut Not For Me.flac
Sep 06 15:24 : update: updating USB/MUSIC/JAZZ/Bob Schwartz Quartet-Look for the Silver Lining/05.Mr. George.flac
...

pi@moode64:~ $ mount
....
/dev/sda1 on /media/MUSIC type vfat (rw,nosuid,nodev,noexec,noatime,fmask=0022,dmask=0022,codepage=437,iocharset=ascii,shortname=mixed,utf8,errors=remount-ro)
....


Regards,
Kent
Reply
#8
I'm not there yet to update on the drive, I do not even see it yet. In the mpd log, there is nothing about the attached drive and no errors in it.
Regards,
JG
Reply
#9
Sorry. Should have looked for last minute posts before I posted my own.

It's a common mistake to think of the Directory>Folders selection to turn the moOde WebUI into a directory browser in a file manager app. It is not. It is a view of the sources which has been indexed by MPD. If you don't update or regenerate the Library it won't have indexed a new source.

Note that there is a setting available to automate the updating process when a USB source is inserted.

Regards,
Kent
Reply
#10
(09-06-2020, 07:27 PM)Giordano Wrote:
(09-06-2020, 07:24 PM)Tim Curtis Wrote: Menu, Update library

but that updates every all , or not? A full update would run for ages. It should not be that I can only see the attached drive if I update everything.
Thanks,
JG

MPD has to index the music collection otherwise you won't see anything in moOde's Library.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: