Posts: 13
Threads: 1
Joined: Dec 2018
Reputation:
0
whenever I start the moode audio player alsa volume is set to 0% !!!
volume controlled is by software
Posts: 13,441
Threads: 305
Joined: Mar 2018
Reputation:
545
Post the output from the command below and I'll have a look.
Code: /var/www/command/sysinfo.sh
-Tim
Posts: 13
Threads: 1
Joined: Dec 2018
Reputation:
0
12-11-2018, 12:33 AM
(This post was last modified: 12-11-2018, 12:54 AM by Tim Curtis.
Edit Reason: placed log output in a code box for readability
)
Code: S Y S T E M P A R A M E T E R S
Date and time = 2018-12-11 01:32:49
System uptime = up 1 minute
Timezone = Europe/Berlin
moOde = Release 4.3 2018-09-27
Host name = moode
ETH0 IP = 192.168.178.40
ETH0 MAC = b8:27:eb:9c:21:b8
WLAN0 IP = 192.168.178.23
WLAN0 MAC = b8:27:eb:c9:74:ed
WiFi country = DE
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.4
KERNEL = 4.14.72-v7+
KTIMER FREQ = No /proc/config.gz Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 2.9G
ROOT used = 72%
ROOT avail = 799M
FS expand = not expanded
MEM free = 694 MB
MEM used = 57 MB
Temperature = 41.9°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = On
P3-BT = On
HDMI = On
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
SSH server = On
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = 7.0.30
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 0.25 0.38 99.37
0 0.50 1.00 98.50
1 0.00 0.00 100.00
2 0.50 0.00 99.50
3 0.00 0.50 99.50
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
19 - bash 0.4 3 2.8
19 - systemd 0.6 0 2.7
19 - sysinfo.sh 0.2 2 1.6
19 - systemd-journal 0.4 1 0.8
29 - mpd 2.2 0 0.7
19 - sshd 0.6 2 0.7
19 - systemd 0.5 3 0.7
19 - systemd-udevd 0.3 0 0.6
19 - mmcqd/0 0.0 3 0.3
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 200 MHz
h264 = 300 MHz pixel = 25 MHz
isp = 300 MHz vec = 126 MHz
v3d = 300 MHz hdmi = 163 MHz
uart = 48 MHz dpi = 0 MHz
grep: /sys/kernel/debug/mmc0/ios: Permission denied
S Y S T E M V O L T A G E S
core = 1.3000V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
U I C U S T O M I Z A T I O N S
Theme = Standard
Accent color = Emerald
Alpha blend = 1.0
Adaptive background = No
Background image = No
Playback history = No
Extra metadata = Yes
Artist list order = Artist
Cover search pri = Embedded cover
Hi-res covers = No
Pixel ratio = 1
A U D I O P A R A M E T E R S
Audio device = Allo Piano 2.1 Hi-Fi DAC
Interface = I2S
Hdwr volume = Controller detected
Mixer name = Master
Output stream = Closed
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 50
Volume mute = Unmuted
Bluetooth controller = Off
Airplay receiver = Off
Spotify receiver = 0
Squeezelite = Off
UPnP client = Off
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.20
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = No
DSD over PCM (DoP) = no
Replay gain = off
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.49
Bluealsa ver = Turn BT on for version info
Speaker sharing = No
Resume MPD = No
A I R P L A Y S E T T I N G S
Version = 3.2.1
Friendly name = Moode Airplay
ALSA device = hw:0
Volume mixer = auto
Resume MPD = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = default:CARD=PianoDACPlus
Resume MPD = No
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Resume MPD = No
Other options = -W -D 500 -R E -S /var/loca
M O O D E L O G
20181211 013137 worker: - Start
20181211 013138 worker: Successfully daemonized
20181211 013138 worker: Session loaded
20181211 013138 worker: Debug logging (on)
20181211 013138 worker: - Platform
20181211 013139 worker: Host (moode)
20181211 013139 worker: Hdwr (Pi-3B 1GB v1.2)
20181211 013139 worker: Arch (armv7l)
20181211 013139 worker: Rasp (9.4)
20181211 013139 worker: Kver (4.14.72-v7+)
20181211 013139 worker: Ktyp (Standard)
20181211 013139 worker: Gov (performance)
20181211 013139 worker: Rel (Moode 4.3 2018-09-27)
20181211 013139 worker: Upd (None)
20181211 013139 worker: MPD (0.20.20)
20181211 013139 worker: USB boot enabled
20181211 013139 worker: File system not expanded yet
20181211 013139 worker: HDMI port on
20181211 013139 worker: File check ok
20181211 013139 worker: - Network
20181211 013139 worker: eth0 exists
20181211 013139 worker: eth0 (192.168.178.40)
20181211 013140 worker: wlan0 exists
20181211 013140 worker: wifi country (DE)
20181211 013140 worker: wlan0 trying SSID (FRITZ!Box 3390)
20181211 013140 worker: wlan0 (192.168.178.23)
20181211 013140 worker: - Audio
20181211 013140 worker: ALSA outputs unmuted
20181211 013140 worker: ALSA card number (0)
20181211 013140 worker: Audio out (I2S audio device)
20181211 013140 worker: Audio dev (Allo Piano 2.1 Hi-Fi DAC)
20181211 013140 worker: ALSA mixer name (Master)
20181211 013140 worker: MPD volume control (software)
20181211 013140 worker: Hdwr volume controller exists
20181211 013140 worker: Chip options (Burr Brown PCM5142)
20181211 013140 worker: Piano output mode (2.1)
20181211 013146 worker: Piano 2.1 initialized
20181211 013146 worker: - Services
20181211 013146 worker: Reset renderer active
20181211 013149 worker: MPD started
20181211 013149 worker: MPD scheduler policy (time-share)
20181211 013149 worker: Configure MPD outputs
20181211 013149 readMpdResponse(): reading response
20181211 013149 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181211 013149 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181211 013149 readMpdResponse(): reading response
20181211 013149 readMpdResponse(): success $str=(OK)
20181211 013149 readMpdResponse(): success $resp[0]=(outputid: 0)
20181211 013149 worker: MPD output 1 ALSA default (on)
20181211 013149 worker: MPD output 2 ALSA crossfeed (off)
20181211 013149 worker: MPD output 3 ALSA parametric eq (off)
20181211 013149 worker: MPD output 4 ALSA graphic eq (off)
20181211 013149 worker: MPD output 5 ALSA bluetooth (off)
20181211 013149 worker: MPD crossfade (off)
20181211 013149 worker: Shellinabox SSH started
20181211 013149 worker: - Music sources
20181211 013149 worker: USB sources (none attached)
20181211 013149 wrk_sourcemount(): mountstr=(mount -t cifs "//192.168.178.20/music" -o username=admin,password='krach',rsize=61440,wsize=65536,iocharset=utf8,vers=1.0,ro,dir_mode=0777,file_mode=0777 "/mnt/NAS/NSA")
20181211 013149 wrk_sourcemount(): sysoutput=()
20181211 013149 worker: NAS sources (mountall initiated)
20181211 013149 worker: - Miscellaneous
20181211 013149 worker: Volume level (50) restored
20181211 013149 readMpdResponse(): reading response
20181211 013149 readMpdResponse(): success $str=(OK)
20181211 013149 readMpdResponse(): success $resp[0]=(OK)
20181211 013149 worker: Maintenance interval (21600)
20181211 013149 worker: Screen saver activation (Never)
20181211 013149 worker: Watchdog started
20181211 013149 worker: Ready
20181211 013150 engine-mpd: Connect
20181211 013150 engine-mpd: Session loaded
20181211 013150 engine-mpd: Open socket
20181211 013150 readMpdResponse(): reading response
20181211 013150 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181211 013150 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181211 013150 engine-mpd: Get initial status
20181211 013150 readMpdResponse(): reading response
20181211 013150 readMpdResponse(): success $str=(OK)
20181211 013150 readMpdResponse(): success $resp[0]=(volume: 50)
20181211 013150 engine-mpd: UI state=(reconnect), MPD state=(stop)
20181211 013150 engine-mpd: Generating enhanced metadata
20181211 013150 readMpdResponse(): reading response
20181211 013150 readMpdResponse(): success $str=(OK)
20181211 013150 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181211 013150 avprobe -show_streams "/var/lib/mpd/music/NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac" 2>&1 | egrep "codec_name|sample_fmt|sample_rate|channels|bits_per_raw_sample"
20181211 013151 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181211 013151 enhanceMetadata(): Song file
20181211 013151 engine-mpd: Metadata returned to client: Size=(27)
20181211 013151 engine-mpd: Connect
20181211 013151 engine-mpd: Session loaded
20181211 013151 engine-mpd: Open socket
20181211 013151 readMpdResponse(): reading response
20181211 013151 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181211 013151 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181211 013151 engine-mpd: Get initial status
20181211 013151 readMpdResponse(): reading response
20181211 013151 readMpdResponse(): success $str=(OK)
20181211 013151 readMpdResponse(): success $resp[0]=(volume: 50)
20181211 013151 engine-mpd: UI state=(stop), MPD state=(stop)
20181211 013151 engine-mpd: Idle
20181211 013151 engine-mpd: Wait for idle timeout
20181211 013151 readMpdResponse(): reading response
20181211 013155 waitWorker(): Start (sys-config, w_active=1)
20181211 013155 worker: Job clearsyslogs
20181211 013156 waitWorker(): Wait (1)
20181211 013156 waitWorker(): End (sys-config, w_active=0)
20181211 013157 engine-mpd: Connect
20181211 013157 engine-mpd: Session loaded
20181211 013157 engine-mpd: Open socket
20181211 013157 readMpdResponse(): reading response
20181211 013157 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181211 013157 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181211 013157 engine-mpd: Get initial status
20181211 013157 readMpdResponse(): reading response
20181211 013157 readMpdResponse(): success $str=(OK)
20181211 013157 readMpdResponse(): success $resp[0]=(volume: 50)
20181211 013157 engine-mpd: UI state=(undefined), MPD state=(stop)
20181211 013157 engine-mpd: Generating enhanced metadata
20181211 013157 readMpdResponse(): reading response
20181211 013157 readMpdResponse(): success $str=(OK)
20181211 013157 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181211 013157 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181211 013157 enhanceMetadata(): Song file
20181211 013157 engine-mpd: Metadata returned to client: Size=(27)
20181211 013157 engine-mpd: Connect
20181211 013157 engine-mpd: Session loaded
20181211 013157 engine-mpd: Open socket
20181211 013157 readMpdResponse(): reading response
20181211 013157 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181211 013157 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181211 013157 engine-mpd: Get initial status
20181211 013157 readMpdResponse(): reading response
20181211 013157 readMpdResponse(): success $str=(OK)
20181211 013157 readMpdResponse(): success $resp[0]=(volume: 50)
20181211 013157 engine-mpd: UI state=(stop), MPD state=(stop)
20181211 013157 engine-mpd: Idle
20181211 013157 engine-mpd: Wait for idle timeout
20181211 013157 readMpdResponse(): reading response
ETA: placed log output in a code box for readability. Third button from the right in the toolbar.
Posts: 107
Threads: 15
Joined: Oct 2018
Reputation:
9
(12-10-2018, 11:22 PM)alexlbz Wrote: whenever I start the moode audio player alsa volume is set to 0% !!!
volume controlled is by software
Pretty sure Tim is going to fix it, but until then and IF you ever run into this type of problem you can do this
Use this command to find sound card control - Look for 'Master Playback Volume'
$ amixer controls
numid=4,iface=MIXER,name='Master Playback Switch'
numid=3,iface=MIXER,name= 'Master Playback Volume'
numid=2,iface=MIXER,name='Capture Switch'
numid=1,iface=MIXER,name='Capture Volume'
Then use this to set default volume
$ amixer cset numid=3 100%
To make this 'stick' after each reboot create a script called [something.sh] and put the below in it with YOUR number, save then change permissions with sudo chmod 755 blahblah.sh. The just put the path to that file in your /etc/rc.local file.
#!/bin/bash
amixer cset numid=3 100%
Posts: 13,441
Threads: 305
Joined: Mar 2018
Reputation:
545
If you are using the Subwoofer modes you need to install the Allo DSP firmware files.
See below from moOde build recipe.
Code: ////////////////////////////////////////////////////////////////
//
// COMPONENT 9 - Allo Piano 2.1 Firmware
//
////////////////////////////////////////////////////////////////
cd ~
wget https://github.com/allocom/piano-firmware/archive/master.zip
sudo unzip master.zip
sudo rm ./master.zip
sudo cp -r ./piano-firmware-master/lib/firmware/allo /lib/firmware
sudo rm -rf ./piano-firmware-master
AFAIK the files are not part of Raspbian firmware cuz the license on the files restricts them from being redistributed,. Thus end-user is responsible for installing them.
Posts: 13,441
Threads: 305
Joined: Mar 2018
Reputation:
545
Posts: 13
Threads: 1
Joined: Dec 2018
Reputation:
0
(12-11-2018, 12:53 AM)Edward Wrote: (12-10-2018, 11:22 PM)alexlbz Wrote: whenever I start the moode audio player alsa volume is set to 0% !!!
volume controlled is by software
Pretty sure Tim is going to fix it, but until then and IF you ever run into this type of problem you can do this
Use this command to find sound card control - Look for 'Master Playback Volume'
$ amixer controls
numid=4,iface=MIXER,name='Master Playback Switch'
numid=3,iface=MIXER,name='Master Playback Volume'
numid=2,iface=MIXER,name='Capture Switch'
numid=1,iface=MIXER,name='Capture Volume'
Then use this to set default volume
$ amixer cset numid=3 100%
To make this 'stick' after each reboot create a script called [something.sh] and put the below in it with YOUR number, save then change permissions with sudo chmod 755 blahblah.sh. The just put the path to that file in your /etc/rc.local file.
#!/bin/bash
amixer cset numid=3 100%
sorry, i don't understand that. that's all new to me!
Posts: 13
Threads: 1
Joined: Dec 2018
Reputation:
0
12-13-2018, 12:36 AM
(This post was last modified: 12-13-2018, 12:43 AM by alexlbz.)
can anyone help me with the problem???
allo dsp firmware files are installed.
Code: S Y S T E M P A R A M E T E R S
Date and time = 2018-12-13 01:33:08
System uptime = up 11 minutes
Timezone = Europe/Berlin
moOde = Release 4.4 2018-12-09
Host name = moode
ETH0 IP = unassigned
ETH0 MAC = b8:27:eb:9c:21:b8
WLAN0 IP = 192.168.178.23
WLAN0 MAC = b8:27:eb:c9:74:ed
WiFi country = DE
HDWR REV = Pi-3B 1GB v1.2
SoC = BCM2835
CORES = 4
ARCH = armv7l
RASPBIAN = 9.6
KERNEL = 4.14.84-v7+
KTIMER FREQ = 100 Hz
USB BOOT = enabled
Warranty = OK
ROOT size = 2.9G
ROOT used = 70%
ROOT avail = 844M
FS expand = not expanded
MEM free = 677 MB
MEM used = 69 MB
Temperature = 44.5°C
CPU GOV = performance
MPD SCHDPOL = TS
P3-WIFI = On
P3-BT = On
HDMI = On
ETH0 CHECK = On
MAX USB CUR = Off
UAC2 FIX = Off
ETHPORT FIX = Off
SSH server = On
LED0 = on
LED1 = on
C O R E S E R V E R S
PHP-FPM = load
NGINX = 1.10.3
SQLite = 3.16.2
C P U L O A D
CPU %usr %sys %idle
all 0.00 0.00 100.00
0 0.00 0.00 100.00
1 0.00 0.00 100.00
2 0.00 0.00 100.00
3 0.00 0.00 100.00
P R O C E S S L O A D
PRI RTPRIO COMMAND %MEM PSR %CPU
19 - sysinfo.sh 0.2 3 1.6
19 - systemd 0.6 1 0.3
19 - worker.php 1.2 0 0.2
19 - systemd-journal 0.5 0 0.1
19 - kthreadd 0.0 0 0.0
39 - kworker/0:0H 0.0 0 0.0
39 - mm_percpu_wq 0.0 0 0.0
19 - ksoftirqd/0 0.0 0 0.0
19 - rcu_sched 0.0 1 0.0
C L O C K F R E Q U E N C I E S
arm = 1200 MHz pwm = 0 MHz
core = 400 MHz emmc = 200 MHz
h264 = 300 MHz pixel = 25 MHz
isp = 300 MHz vec = 126 MHz
v3d = 300 MHz hdmi = 163 MHz
uart = 47 MHz dpi = 0 MHz
SD card = 50 MHz
S Y S T E M V O L T A G E S
core = 1.3000V
sdram controller = 1.2000V
sdram I/O = 1.2000V
sdram chip = 1.2250V
U I C U S T O M I Z A T I O N S
Theme = Standard
Accent color = Alizarin
Alpha blend = 1.0
Adaptive background = No
Background image = No
Playback history = No
Extra metadata = Yes
Artist list order = Artist
Compilation rollup = No
Compilation excludes = greatest hits
Cover search pri = Embedded cover
Hi-res covers = Auto
Pixel ratio = 1
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
A U D I O P A R A M E T E R S
Audio device = Allo Piano 2.1 Hi-Fi DAC
Interface = I2S
Hdwr volume = Controller detected
Mixer name = Master
Output stream = Closed
ALSA version = 1.1.3-5+rpi3
SoX version = 0.1.2-2
Volume knob = 0
Volume mute = Unmuted
Bluetooth controller = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
UPnP client = Off
DLNA server = Off
Rotary encoder = Off
Encoder params = 100 2 3 4 5
Crossfeed = Off
Parametric EQ = Off
Graphic EQ = Off
Auto-shuffle = Off
Autoplay = Off
MPD crossfade = Off
M P D S E T T I N G S
Version = 0.20.20
Volume control = software
ALSA device = hw:0
SoX resampling = disabled
SoX quality = very high
SoX multithreading = off
Audio buffer (kb) = 4096
Buffer before play = 10%
Output buffer size (kb) = 81920
Volume normalization = No
DSD over PCM (DoP) = no
Replay gain = off
B L U E T O O T H S E T T I N G S
Bluetooth ver = 5.49
Bluealsa ver = Turn BT on for version info
Speaker sharing = No
Resume MPD = No
A I R P L A Y S E T T I N G S
Version = 3.2.2
Friendly name = Moode Airplay
ALSA device = hw:0
Volume mixer = auto
Resume MPD = No
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout (ms) = 120
Audio buffer (secs) = 0.0
S P O T I F Y S E T T I N G S
Friendly name = Moode Spotify
ALSA device = default:CARD=PianoDACPlus
Resume MPD = No
Bit rate = 160
Initial volume = 0
Volume curve = Logarithmic
Volume normalization = No
Normalization pregain = 0
S Q U E E Z E L I T E S E T T I N G S
Version = 1.8.7-1052 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Resume MPD = No
Other options = -W -D 500 -R E -S /var/loca
M O O D E L O G
20181213 012120 worker: - Start
20181213 012121 worker: Successfully daemonized
20181213 012121 worker: Integrity check ok
20181213 012121 worker: Session loaded
20181213 012121 worker: Debug logging (on)
20181213 012121 worker: - Platform
20181213 012122 worker: Host (moode)
20181213 012122 worker: Hdwr (Pi-3B 1GB v1.2)
20181213 012122 worker: Arch (armv7l)
20181213 012122 worker: Rasp (9.6)
20181213 012122 worker: Kver (4.14.84-v7+)
20181213 012122 worker: Ktyp (Standard)
20181213 012122 worker: Gov (performance)
20181213 012122 worker: Rel (Moode 4.4 2018-12-09)
20181213 012122 worker: Upd (None)
20181213 012122 worker: MPD (0.20.20)
20181213 012122 worker: USB boot enabled
20181213 012122 worker: File system not expanded yet
20181213 012122 worker: HDMI port on
20181213 012122 worker: File check ok
20181213 012122 worker: - Network
20181213 012122 worker: eth0 exists
20181213 012122 worker: eth0 wait 0 for IP address
20181213 012125 worker: eth0 wait 1 for IP address
20181213 012129 worker: eth0 wait 2 for IP address
20181213 012132 worker: eth0 wait 3 for IP address
20181213 012135 worker: eth0 wait 4 for IP address
20181213 012136 engine-mpd: Worker not ready yet
20181213 012138 worker: eth0 wait 5 for IP address
20181213 012139 engine-mpd: Worker not ready yet
20181213 012141 worker: eth0 wait 6 for IP address
20181213 012142 engine-mpd: Worker not ready yet
20181213 012144 worker: eth0 wait 7 for IP address
20181213 012152 engine-mpd: Worker not ready yet
20181213 012154 worker: eth0 wait 8 for IP address
20181213 012155 engine-mpd: Worker not ready yet
20181213 012157 worker: eth0 wait 9 for IP address
20181213 012158 engine-mpd: Worker not ready yet
20181213 012200 worker: eth0 address not assigned
20181213 012200 worker: wlan0 exists
20181213 012200 worker: wifi country (DE)
20181213 012200 worker: wlan0 trying SSID (FRITZ!Box 3390)
20181213 012200 worker: wlan0 (192.168.178.23)
20181213 012200 worker: - Audio
20181213 012200 worker: ALSA outputs unmuted
20181213 012200 worker: ALSA card number (0)
20181213 012200 worker: Audio out (I2S audio device)
20181213 012200 worker: Audio dev (Allo Piano 2.1 Hi-Fi DAC)
20181213 012200 worker: ALSA mixer name (Master)
20181213 012200 worker: MPD volume control (software)
20181213 012200 worker: Hdwr volume controller exists
20181213 012200 worker: Chip options (Burr Brown PCM5142)
20181213 012200 worker: Piano output mode (2.1)
20181213 012201 engine-mpd: Worker not ready yet
20181213 012204 engine-mpd: Worker not ready yet
20181213 012207 worker: Piano 2.1 initialized
20181213 012207 worker: - Services
20181213 012207 worker: Reset renderer active
20181213 012207 engine-mpd: Worker not ready yet
20181213 012209 worker: MPD started
20181213 012209 worker: MPD scheduler policy (time-share)
20181213 012209 worker: Configure MPD outputs
20181213 012209 readMpdResponse(): reading response
20181213 012209 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012209 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012209 readMpdResponse(): reading response
20181213 012209 readMpdResponse(): success $str=(OK)
20181213 012209 readMpdResponse(): success $resp[0]=(outputid: 0)
20181213 012209 worker: MPD output 1 ALSA default (on)
20181213 012209 worker: MPD output 2 ALSA crossfeed (off)
20181213 012209 worker: MPD output 3 ALSA parametric eq (off)
20181213 012209 worker: MPD output 4 ALSA graphic eq (off)
20181213 012209 worker: MPD output 5 ALSA bluetooth (off)
20181213 012209 worker: MPD crossfade (off)
20181213 012209 worker: Shellinabox SSH started
20181213 012209 worker: - Music sources
20181213 012209 worker: USB sources (none attached)
20181213 012209 wrk_sourcemount(): mountstr=(mount -t cifs "//192.168.178.20/music" -o username=admin,password='krach',rsize=61440,wsize=65536,iocharset=utf8,vers=1.0,ro,dir_mode=0777,file_mode=0777 "/mnt/NAS/NSA")
20181213 012209 wrk_sourcemount(): sysoutput=()
20181213 012209 worker: NAS sources (mountall initiated)
20181213 012209 worker: - Miscellaneous
20181213 012209 worker: Volume level (0) restored
20181213 012209 readMpdResponse(): reading response
20181213 012209 readMpdResponse(): success $str=(OK)
20181213 012209 readMpdResponse(): success $resp[0]=(OK)
20181213 012209 worker: Maintenance interval (21600)
20181213 012209 worker: Screen saver activation (Never)
20181213 012209 worker: Watchdog started
20181213 012209 worker: Ready
20181213 012211 engine-mpd: Connect
20181213 012211 engine-mpd: Session loaded
20181213 012211 engine-mpd: Open socket
20181213 012211 readMpdResponse(): reading response
20181213 012211 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012211 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012211 engine-mpd: Get initial status
20181213 012211 readMpdResponse(): reading response
20181213 012211 readMpdResponse(): success $str=(OK)
20181213 012211 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012211 engine-mpd: UI state=(reconnect), MPD state=(stop)
20181213 012211 engine-mpd: Generating enhanced metadata
20181213 012211 readMpdResponse(): reading response
20181213 012211 readMpdResponse(): success $str=(OK)
20181213 012211 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012211 avprobe -show_streams "/var/lib/mpd/music/NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac" 2>&1 | egrep "codec_name|sample_fmt|sample_rate|channels|bits_per_raw_sample"
20181213 012212 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012212 enhanceMetadata(): Song file
20181213 012212 engine-mpd: Metadata returned to client: Size=(29)
20181213 012212 engine-mpd: Connect
20181213 012212 engine-mpd: Session loaded
20181213 012212 engine-mpd: Open socket
20181213 012212 readMpdResponse(): reading response
20181213 012212 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012212 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012212 engine-mpd: Get initial status
20181213 012212 readMpdResponse(): reading response
20181213 012212 readMpdResponse(): success $str=(OK)
20181213 012212 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012212 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012212 engine-mpd: Idle
20181213 012212 engine-mpd: Wait for idle timeout
20181213 012212 readMpdResponse(): reading response
20181213 012216 waitWorker(): Start (sys-config, w_active=0)
20181213 012216 waitWorker(): End (sys-config, w_active=0)
20181213 012217 engine-mpd: Connect
20181213 012217 engine-mpd: Session loaded
20181213 012217 engine-mpd: Open socket
20181213 012217 readMpdResponse(): reading response
20181213 012217 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012217 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012217 engine-mpd: Get initial status
20181213 012217 readMpdResponse(): reading response
20181213 012217 readMpdResponse(): success $str=(OK)
20181213 012217 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012217 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012217 engine-mpd: Generating enhanced metadata
20181213 012217 readMpdResponse(): reading response
20181213 012217 readMpdResponse(): success $str=(OK)
20181213 012217 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012217 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012217 enhanceMetadata(): Song file
20181213 012217 engine-mpd: Metadata returned to client: Size=(29)
20181213 012218 engine-mpd: Connect
20181213 012218 engine-mpd: Session loaded
20181213 012218 engine-mpd: Open socket
20181213 012218 readMpdResponse(): reading response
20181213 012218 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012218 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012218 engine-mpd: Get initial status
20181213 012218 readMpdResponse(): reading response
20181213 012218 readMpdResponse(): success $str=(OK)
20181213 012218 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012218 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012218 engine-mpd: Idle
20181213 012218 engine-mpd: Wait for idle timeout
20181213 012218 readMpdResponse(): reading response
20181213 012226 engine-mpd: Connect
20181213 012226 engine-mpd: Session loaded
20181213 012226 engine-mpd: Open socket
20181213 012226 readMpdResponse(): reading response
20181213 012226 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012226 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012226 engine-mpd: Get initial status
20181213 012226 readMpdResponse(): reading response
20181213 012226 readMpdResponse(): success $str=(OK)
20181213 012226 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012226 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012226 engine-mpd: Generating enhanced metadata
20181213 012226 readMpdResponse(): reading response
20181213 012226 readMpdResponse(): success $str=(OK)
20181213 012226 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012226 readMpdResponse(): reading response
20181213 012226 readMpdResponse(): success $str=(OK)
20181213 012226 readMpdResponse(): success $resp[0]=(directory: NAS)
20181213 012226 readMpdResponse(): reading response
20181213 012226 readMpdResponse(): success $str=(OK)
20181213 012226 readMpdResponse(): success $resp[0]=(playlist: RADIO/WCLV Cleveland 104.9 - Classical.pls)
20181213 012226 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012226 enhanceMetadata(): Song file
20181213 012226 engine-mpd: Metadata returned to client: Size=(29)
20181213 012227 readMpdResponse(): reading response
20181213 012227 readMpdResponse(): success $str=(OK)
20181213 012227 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012227 engine-mpd: Connect
20181213 012227 engine-mpd: Session loaded
20181213 012227 engine-mpd: Open socket
20181213 012227 readMpdResponse(): reading response
20181213 012227 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012227 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012227 engine-mpd: Get initial status
20181213 012227 readMpdResponse(): reading response
20181213 012227 readMpdResponse(): success $str=(OK)
20181213 012227 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012227 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012227 engine-mpd: Idle
20181213 012227 engine-mpd: Wait for idle timeout
20181213 012227 readMpdResponse(): reading response
20181213 012233 waitWorker(): Start (snd-config, w_active=0)
20181213 012233 waitWorker(): End (snd-config, w_active=0)
20181213 012234 engine-mpd: Connect
20181213 012234 engine-mpd: Session loaded
20181213 012234 engine-mpd: Open socket
20181213 012234 readMpdResponse(): reading response
20181213 012234 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012234 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012234 engine-mpd: Get initial status
20181213 012234 readMpdResponse(): reading response
20181213 012234 readMpdResponse(): success $str=(OK)
20181213 012234 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012234 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012234 engine-mpd: Generating enhanced metadata
20181213 012234 readMpdResponse(): reading response
20181213 012234 readMpdResponse(): success $str=(OK)
20181213 012234 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012234 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012234 enhanceMetadata(): Song file
20181213 012234 engine-mpd: Metadata returned to client: Size=(29)
20181213 012234 engine-mpd: Connect
20181213 012234 engine-mpd: Session loaded
20181213 012234 engine-mpd: Open socket
20181213 012234 readMpdResponse(): reading response
20181213 012234 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012234 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012234 engine-mpd: Get initial status
20181213 012234 readMpdResponse(): reading response
20181213 012234 readMpdResponse(): success $str=(OK)
20181213 012234 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012234 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012234 engine-mpd: Idle
20181213 012234 engine-mpd: Wait for idle timeout
20181213 012234 readMpdResponse(): reading response
20181213 012237 readMpdResponse(): reading response
20181213 012237 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012237 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012237 waitWorker(): Start (, w_active=0)
20181213 012237 waitWorker(): End (, w_active=0)
20181213 012238 engine-mpd: Connect
20181213 012238 engine-mpd: Session loaded
20181213 012238 engine-mpd: Open socket
20181213 012238 readMpdResponse(): reading response
20181213 012238 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012238 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012238 engine-mpd: Get initial status
20181213 012238 readMpdResponse(): reading response
20181213 012238 readMpdResponse(): success $str=(OK)
20181213 012238 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012238 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012238 engine-mpd: Generating enhanced metadata
20181213 012238 readMpdResponse(): reading response
20181213 012238 readMpdResponse(): success $str=(OK)
20181213 012238 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012238 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012238 enhanceMetadata(): Song file
20181213 012238 engine-mpd: Metadata returned to client: Size=(29)
20181213 012238 engine-mpd: Connect
20181213 012238 engine-mpd: Session loaded
20181213 012238 engine-mpd: Open socket
20181213 012238 readMpdResponse(): reading response
20181213 012238 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012238 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012238 engine-mpd: Get initial status
20181213 012238 readMpdResponse(): reading response
20181213 012238 readMpdResponse(): success $str=(OK)
20181213 012238 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012238 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012238 engine-mpd: Idle
20181213 012238 engine-mpd: Wait for idle timeout
20181213 012238 readMpdResponse(): reading response
20181213 012249 waitWorker(): Start (snd-config, w_active=0)
20181213 012249 waitWorker(): End (snd-config, w_active=0)
20181213 012249 engine-mpd: Connect
20181213 012249 engine-mpd: Session loaded
20181213 012249 engine-mpd: Open socket
20181213 012249 readMpdResponse(): reading response
20181213 012249 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012249 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012249 engine-mpd: Get initial status
20181213 012249 readMpdResponse(): reading response
20181213 012249 readMpdResponse(): success $str=(OK)
20181213 012249 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012249 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012249 engine-mpd: Generating enhanced metadata
20181213 012249 readMpdResponse(): reading response
20181213 012249 readMpdResponse(): success $str=(OK)
20181213 012249 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012249 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012249 enhanceMetadata(): Song file
20181213 012249 engine-mpd: Metadata returned to client: Size=(29)
20181213 012249 engine-mpd: Connect
20181213 012249 engine-mpd: Session loaded
20181213 012249 engine-mpd: Open socket
20181213 012249 readMpdResponse(): reading response
20181213 012249 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012249 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012249 engine-mpd: Get initial status
20181213 012249 readMpdResponse(): reading response
20181213 012249 readMpdResponse(): success $str=(OK)
20181213 012249 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012249 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012249 engine-mpd: Idle
20181213 012249 engine-mpd: Wait for idle timeout
20181213 012249 readMpdResponse(): reading response
20181213 012420 waitWorker(): Start (sys-config, w_active=0)
20181213 012420 waitWorker(): End (sys-config, w_active=0)
20181213 012421 engine-mpd: Connect
20181213 012421 engine-mpd: Session loaded
20181213 012421 engine-mpd: Open socket
20181213 012421 readMpdResponse(): reading response
20181213 012421 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012421 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012421 engine-mpd: Get initial status
20181213 012421 readMpdResponse(): reading response
20181213 012421 readMpdResponse(): success $str=(OK)
20181213 012421 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012421 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012421 engine-mpd: Generating enhanced metadata
20181213 012421 readMpdResponse(): reading response
20181213 012421 readMpdResponse(): success $str=(OK)
20181213 012421 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012421 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012421 enhanceMetadata(): Song file
20181213 012421 engine-mpd: Metadata returned to client: Size=(29)
20181213 012421 engine-mpd: Connect
20181213 012421 engine-mpd: Session loaded
20181213 012421 engine-mpd: Open socket
20181213 012421 readMpdResponse(): reading response
20181213 012421 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012421 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012421 engine-mpd: Get initial status
20181213 012421 readMpdResponse(): reading response
20181213 012421 readMpdResponse(): success $str=(OK)
20181213 012421 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012421 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012421 engine-mpd: Idle
20181213 012421 engine-mpd: Wait for idle timeout
20181213 012421 readMpdResponse(): reading response
20181213 012430 waitWorker(): Start (sys-config, w_active=1)
20181213 012431 worker: Job clearbrcache
20181213 012431 waitWorker(): Wait (1)
20181213 012431 waitWorker(): End (sys-config, w_active=0)
20181213 012432 engine-mpd: Connect
20181213 012432 engine-mpd: Session loaded
20181213 012432 engine-mpd: Open socket
20181213 012432 readMpdResponse(): reading response
20181213 012432 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012432 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012432 engine-mpd: Get initial status
20181213 012432 readMpdResponse(): reading response
20181213 012432 readMpdResponse(): success $str=(OK)
20181213 012432 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012432 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012432 engine-mpd: Generating enhanced metadata
20181213 012432 readMpdResponse(): reading response
20181213 012432 readMpdResponse(): success $str=(OK)
20181213 012432 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012432 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012432 enhanceMetadata(): Song file
20181213 012432 engine-mpd: Metadata returned to client: Size=(29)
20181213 012433 engine-mpd: Connect
20181213 012433 engine-mpd: Session loaded
20181213 012433 engine-mpd: Open socket
20181213 012433 readMpdResponse(): reading response
20181213 012433 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012433 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012433 engine-mpd: Get initial status
20181213 012433 readMpdResponse(): reading response
20181213 012433 readMpdResponse(): success $str=(OK)
20181213 012433 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012433 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012433 engine-mpd: Idle
20181213 012433 engine-mpd: Wait for idle timeout
20181213 012433 readMpdResponse(): reading response
20181213 012459 waitWorker(): Start (sys-config, w_active=1)
20181213 012500 waitWorker(): Wait (1)
20181213 012501 worker: Job clearsyslogs
20181213 012501 waitWorker(): Wait (2)
20181213 012501 waitWorker(): End (sys-config, w_active=0)
20181213 012503 engine-mpd: Connect
20181213 012503 engine-mpd: Session loaded
20181213 012503 engine-mpd: Open socket
20181213 012503 readMpdResponse(): reading response
20181213 012503 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012503 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012503 engine-mpd: Get initial status
20181213 012503 readMpdResponse(): reading response
20181213 012503 readMpdResponse(): success $str=(OK)
20181213 012503 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012503 engine-mpd: UI state=(undefined), MPD state=(stop)
20181213 012503 engine-mpd: Generating enhanced metadata
20181213 012503 readMpdResponse(): reading response
20181213 012503 readMpdResponse(): success $str=(OK)
20181213 012503 readMpdResponse(): success $resp[0]=(file: NAS/NSA/100 Hits - Summer Reggae/1. Uptown Top Ranking.flac)
20181213 012503 enhanceMetadata(): coverurl: (/coverart.php/NAS%2FNSA%2F100%20Hits%20-%20Summer%20Reggae%2F1.%20Uptown%20Top%20Ranking.flac)
20181213 012503 enhanceMetadata(): Song file
20181213 012503 engine-mpd: Metadata returned to client: Size=(29)
20181213 012503 engine-mpd: Connect
20181213 012503 engine-mpd: Session loaded
20181213 012503 engine-mpd: Open socket
20181213 012503 readMpdResponse(): reading response
20181213 012503 readMpdResponse(): success $str=(OK MPD 0.20.0)
20181213 012503 readMpdResponse(): success $resp[0]=(OK MPD 0.20.0)
20181213 012503 engine-mpd: Get initial status
20181213 012503 readMpdResponse(): reading response
20181213 012503 readMpdResponse(): success $str=(OK)
20181213 012503 readMpdResponse(): success $resp[0]=(volume: 0)
20181213 012503 engine-mpd: UI state=(stop), MPD state=(stop)
20181213 012503 engine-mpd: Idle
20181213 012503 engine-mpd: Wait for idle timeout
20181213 012503 readMpdResponse(): reading response
Posts: 13,441
Threads: 305
Joined: Mar 2018
Reputation:
545
what is the output of the command below?
Posts: 13
Threads: 1
Joined: Dec 2018
Reputation:
0
(12-13-2018, 12:54 AM)Tim Curtis Wrote: what is the output of the command below?
Dual mode: None
Subw mode: 2.1
Sub xover: 90
Sub level: 100%
Main levl: 0%
Mstr levl: 0%
|
