Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Problem: No sound: Pi zero w with Hifiberry DAC+ zero
#11
(07-03-2019, 01:39 AM)BriceL Wrote: Thanks for the try Tim!
I hope that someone will come across a solution  Rolleyes

see you around

Brice

What is the value of 'Digital' mixer using the alsamixer command and the effect on volume adjusting digital volume level?
Reply
#12
alsamixer gives me:

"Card: snd_rpi_hifiberry_dac
This sound device does not have any controls."

Witch should be normal since DAC+ Zero doesn't have volume control

and

"pi@moode:~ $ mixer set Digital 50%
amixer: Unable to find simple control 'Digital',0 "
Reply
#13
Hi BriceL,
I've got the same problem with the "Hifiberry DAC/DAC+ Zero" Soundcard :-(
run a fresh 7.1 Installation ... simply add a Radiosation ... every seems/looks fine ... but I hear no sound :-(

Have you found a solution in the meantime?

so long,
Schimy
Reply
#14
Reboot then post Moode startup log.

Code:
moodeutl -l
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#15
(03-28-2021, 05:28 PM)Tim Curtis Wrote: Reboot then post Moode startup log.

Code:
moodeutl -l

Hi Tim,
thx for your reply :-)

Code:
pi@moode:~ $ moodeutl -l
20210328 195723 worker: -- Start
20210328 195723 worker: Successfully daemonized
20210328 195724 worker: Integrity check (passed)
20210328 195728 worker: File check (OK)
20210328 195731 worker: Session vacuumed
20210328 195731 worker: Session loaded
20210328 195731 worker: Debug logging (OFF)
20210328 195731 worker: -- Device
20210328 195731 worker: ALSA cards: (0:sndrpihifiberry | 1:empty | 2:empty | 3:empty
20210328 195731 worker: MPD config: (0:HiFiBerry DAC/DAC+ Zero | mixer:(PCM) | card:0)
20210328 195731 worker: ALSA mixer actual (none)
20210328 195731 worker: ALSA volume (none)
20210328 195731 worker: -- System
20210328 195735 worker: Host     (moode)
20210328 195735 worker: moOde    (7.1.0 2021-03-15)
20210328 195735 worker: RaspiOS  (10.6)
20210328 195735 worker: Kernel   (5.4.77+ #1371)
20210328 195735 worker: Platform (Pi-Zero W 1.1 512MB)
20210328 195735 worker: ARM arch (armv6l, 32-bit kernel)
20210328 195735 worker: MPD ver  (0.22.6_p0x3)
20210328 195735 worker: CPU gov  (ondemand)
20210328 195735 worker: USB boot not available
20210328 195736 worker: File system expanded
20210328 195736 worker: HDMI port off
20210328 195736 worker: -- Network
20210328 195736 worker: eth0 does not exist
20210328 195736 worker: eth0 address not assigned
20210328 195736 worker: wlan0 exists
20210328 195736 worker: wifi country (DE)
20210328 195736 worker: wlan0 trying SSID (minnetise)
20210328 195736 worker: IP addr (192.168.0.203)
20210328 195736 worker: Netmask (255.255.255.0)
20210328 195736 worker: Gateway (192.168.0.1)
20210328 195736 worker: Pri DNS (192.168.0.1)
20210328 195736 worker: Domain  (fritz.box)
20210328 195737 worker: -- Audio
20210328 195738 worker: MPD conf updated
20210328 195738 worker: ALSA card number (0)
20210328 195738 worker: MPD audio output (HiFiBerry DAC/DAC+ Zero)
20210328 195752 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20210328 195752 worker: ALSA mixer name (none)
20210328 195752 worker: MPD volume control (software)
20210328 195752 worker: Hdwr volume controller not detected
20210328 195752 worker: Reset renderer active flags
20210328 195752 worker: CamillaDSP (off)
20210328 195752 worker: -- MPD
20210328 195752 worker: MPD started
20210328 195754 worker: MPD accepting connections
20210328 195754 worker: MPD output 1 ALSA Default (on)
20210328 195754 worker: MPD output 2 ALSA Crossfeed (off)
20210328 195754 worker: MPD output 3 ALSA Parametric EQ (off)
20210328 195754 worker: MPD output 4 ALSA Graphic EQ (off)
20210328 195754 worker: MPD output 5 ALSA Polarity Inv (off)
20210328 195754 worker: MPD output 6 ALSA CamillaDSP (off)
20210328 195754 worker: MPD output 7 ALSA Bluetooth (off)
20210328 195754 worker: MPD output 8 HTTP Server (off)
20210328 195754 worker: MPD crossfade (off)
20210328 195754 worker: MPD ignore CUE files (yes)
20210328 195754 worker: -- Feature availability
20210328 195754 worker: Source select (available)
20210328 195754 worker: Source select (source: MPD)
20210328 195754 worker: Source select (output: HiFiBerry DAC/DAC+ Zero)
20210328 195754 worker: Bluetooth (available)
20210328 195754 worker: Airplay renderer (available)
20210328 195754 worker: Spotify renderer (available)
20210328 195754 worker: Squeezelite (available)
20210328 195754 worker: RoonBridge renderer (not installed)
20210328 195754 worker: UPnP renderer (available)
20210328 195754 worker: DLNA server (available)
20210328 195754 worker: UPnP browser (available)
20210328 195754 worker: GPIO button handler (available)
20210328 195754 worker: Stream recorder (n/a)
20210328 195754 worker: -- Music sources
20210328 195754 worker: USB sources (none attached)
20210328 195754 worker: NAS and UPnP sources (none configured)
20210328 195754 worker: -- Miscellaneous
20210328 195754 worker: USB volume knob (Off)
20210328 195754 worker: Shellinabox SSH started
20210328 195754 worker: USB auto-mounter (udisks-glue)
20210328 195755 worker: LED0 (Off)
20210328 195755 worker: LED1 (sysclass does not exist)
20210328 195755 worker: Saved MPD vol level (0)
20210328 195755 worker: Preamp volume level (0)
20210328 195755 worker: MPD volume level (0) restored
20210328 195755 worker: ALSA volume level (None)
20210328 195755 worker: Auto-play (Off)
20210328 195755 worker: Maintenance interval (3 hrs)
20210328 195755 worker: Screen saver activation (Never)
20210328 195755 worker: Session permissions (OK)
20210328 195755 worker: Watchdog started
20210328 195755 worker: Ready
Reply
#16
The log entry below suggests a USB DAC was configured prior to switching to I2S DAC. In this case open MPD Config and SAVE, then reboot. The startup log should show mixer (none) instead of mixer (PCM).

20210328 195731 worker: MPD config: (0:HiFiBerry DAC/DAC+ Zero | mixer: PCM) | card:0)
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#17
jipp, I've changed the soundcard, to check the Amp and Cables ... works ;-)

now I saved the MDP-Settings and reboot the pi ...the log looks like:
Code:
MPD config: (0:HiFiBerry DAC/DAC+ Zero | mixer: none) | card:0)


but there is no sound :-(
Reply
#18
I don't have that board but I do have a Mamboberry LS DAC which also has no hardware mixer and uses the same Hifberry-dac driver and no issues whatsoever.

Maybe someone else with one of the Hifiberry boards can try to repro.
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply


Forum Jump: