how to attach local drive

[Giordano]

I'm keep trying.
Did tried to remove and re attach, reboot etc. a few times. Now, it does not show up at all in the library.
I just tried to clear the log, update again. It starts to update fine, from the local drive, but at a point the logfile stops to grow, no errors, but it just stops and nothing is shown from the local drive. Nothing from what is in the log either.

It is very similar to what happened to me 2 days ago with the networks drive.
It looks like it is running out some kind of resources. Now I cleared again, it stops at the exact same point.

I have plenty of space on the sd cad for sure
pi@zeneM:~ $ df -h
Filesystem                     Size  Used Avail Use% Mounted on
/dev/root                       14G  2.9G   11G  22% /
devtmpfs                       895M     0  895M   0% /dev
tmpfs                          927M     0  927M   0% /dev/shm
tmpfs                          927M  9.4M  918M   2% /run
tmpfs                          5.0M  4.0K  5.0M   1% /run/lock
tmpfs                          927M     0  927M   0% /sys/fs/cgroup
/dev/mmcblk0p1                 253M   55M  198M  22% /boot
/dev/sda1                      3.6T  3.1T  405G  89% /media/zeneM
//192.168.2.21/zene            5.5T  2.7T  2.8T  49% /mnt/NAS/zene
//192.168.2.21/ellenorizetlen  5.5T  2.7T  2.8T  49% /mnt/NAS/ellenorizetlen
tmpfs                          186M     0  186M   0% /run/user/1000

I give up for now, have to sleep some :-)

Regards,
JG