moodeaudio.org > Moode Forum › moOde audio player › Support v
Issue with Merus HAT after 6.52

Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


Thread Modes
Issue with Merus HAT after 6.52
OlafM Offline
Junior Member
*
Posts: 15
Threads: 4
Joined: Dec 2019
Reputation: 0
#3
10-27-2020, 07:16 PM
I had the same issue overhere. Merus HAT + moOde 6.7.1 was not working.
With the following:
Code:
moodeutl -l
[color=#000000][size=x-small][font=Menlo]20200722 164901 worker: -- Start[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Successfully daemonized[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Integrity check (passed)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Session loaded[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Debug logging (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Device raw: (0:empty|1:empty|2:empty|3:empty[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Device i2s: (MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Device mpd: (0:MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: Device ses: (0|MERUS(tm) Amp piHAT ZW|Headphone|0%)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: ALSA Digital volume set to (Invalid card number.)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164902 worker: -- System[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: Host     (moode)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: moOde    (6.7.1 2020-07-22)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: RaspiOS  (10.4)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: Kernel   (5.4.51-v7+ #1325)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: Platform (Pi-3B+ 1GB v1.3)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: ARM arch (armv7l, 32-bit kernel)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: MPD ver  (0.21.24)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: CPU gov  (ondemand)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: USB boot enabled[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: File system not expanded yet[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164904 worker: HDMI port on[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164905 worker: File check (OK)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164905 worker: -- Network[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164905 worker: eth0 exists[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164905 worker: eth0 wait 0 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164908 worker: eth0 wait 1 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164911 worker: eth0 wait 2 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20200722 164915 worker: eth0 wait 3 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142351 worker: eth0 wait 4 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: eth0 address not assigned[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: wlan0 exists[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: wifi country (US)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: wlan0 trying SSID (mastkraan)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: IP addr (192.168.178.69)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: Netmask (255.255.255.0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: Gateway (192.168.178.1)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: Pri DNS (192.168.178.1)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: Domain  (fritz.box)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142354 worker: -- Audio[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: MPD conf updated[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: ALSA outputs unmuted[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: ALSA card number (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: Audio output (MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: Audio formats (cat: /proc/asound/card0/pcm0p/sub0/hw_params: No such file or directory)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: ALSA mixer name (Digital)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: MPD volume control (software)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: Hdwr volume controller exists[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: Max ALSA volume (100%)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: Reset renderer active flags[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142355 worker: -- MPD[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD started[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD accepting connections[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Configure MPD outputs[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 1 ALSA default (on)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 2 ALSA crossfeed (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 3 ALSA parametric eq (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 4 ALSA graphic eq (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 5 ALSA polarity inversion (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 6 ALSA bluetooth (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD output 7 HTTP stream (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: MPD crossfade (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: -- Feature availability[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Source select (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Source select (source: MPD)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Source select (output: MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Bluetooth (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Airplay renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Spotify renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Squeezelite renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: UPnP renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: DLNA server (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: UPnP browser (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: Audio scrobbler (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: GPIO button handler (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: -- Music sources[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: USB sources (none attached)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: NAS and UPnP sources (none configured)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: -- Miscellaneous[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: USB volume knob (Off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142356 worker: USB auto-mounter (udisks-glue)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: LED0 (On)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: LED1 (On)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Saved MPD vol level (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Preamp volume level (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: MPD volume level (0) restored[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: ALSA Digital volume (Invalid card number.)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Auto-play (Off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Maintenance interval (3 hrs)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Screen saver activation (Never)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Session permissions (OK)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Watchdog started[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142357 worker: Ready[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142421 worker: Job i2sdevice[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142434 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142440 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 142447 watchdog: Wlan0 down attempting reset[/font][/size][/color]
20201027 142505 watchdog: Wlan0 down attempting reset

Code:
dmesg | grep MerusAmp
[color=#000000][size=x-small][font=Menlo][    6.968198] snd-rpi-simple soc:sound: ASoC: failed to init link [color=#ca3323][b]MerusAmp[/b][/color]: -517[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo][    7.046030] snd-rpi-simple soc:sound: ASoC: failed to init link [color=#ca3323][b]MerusAmp[/b][/color]: -517[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo][    7.468586] snd-rpi-simple soc:sound: ASoC: failed to init link [color=#ca3323][b]MerusAmp[/b][/color]: -517[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo][    7.486457] snd-rpi-simple soc:sound: ASoC: failed to init link [color=#ca3323][b]MerusAmp[/b][/color]: -517[/font][/size][/color]
[    8.459129] snd-rpi-simple soc:sound: ASoC: failed to init link MerusAmp: -517

Did an update:


Code:
sudo apt update

sudo apt full-upgrade


After reboot, it works now again.

Still I am puzzled about the messages of  moodeutl -l and dmesg | grep MerusAmp. See below.

Can you recommend on any other required actions?


Code:
moodeutl -l

20201027 144016 worker: -- Start
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Successfully daemonized[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Integrity check (passed)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Session loaded[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Debug logging (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Device raw: (0:sndrpimerusamp|1:empty|2:empty|3:empty[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Device i2s: (MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Device mpd: (0:MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: Device ses: (0|MERUS(tm) Amp piHAT ZW|Digital|Invalid card number.%)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: ALSA Digital volume set to (amixer: Unable to find simple control 'Digital',0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144017 worker: -- System[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: Host     (moode)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: moOde    (6.7.1 2020-07-22)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: RaspiOS  (10.6)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: Kernel   (5.4.72-v7+ #1356)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: Platform (Pi-3B+ 1GB v1.3)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: ARM arch (armv7l, 32-bit kernel)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: MPD ver  (0.21.24)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: CPU gov  (ondemand)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: USB boot enabled[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: File system not expanded yet[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: HDMI port on[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: File check (OK)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: -- Network[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: eth0 exists[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144019 worker: eth0 wait 0 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144022 worker: eth0 wait 1 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144025 worker: eth0 wait 2 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144028 worker: eth0 wait 3 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144031 worker: eth0 wait 4 for IP address[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: eth0 address not assigned[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: wlan0 exists[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: wifi country (US)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: wlan0 trying SSID (mastkraan)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: IP addr (192.168.178.69)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: Netmask (255.255.255.0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: Gateway (192.168.178.1)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: Pri DNS (192.168.178.1)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: Domain  (fritz.box)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: -- Audio[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: MPD conf updated[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: ALSA outputs unmuted[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: ALSA card number (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144046 worker: Audio output (MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Audio formats (S24_LE, S32_LE)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: ALSA mixer name (Digital)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD volume control (hardware)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Hdwr volume controller not detected[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Reset renderer active flags[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: -- MPD[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD started[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD accepting connections[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Configure MPD outputs[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 1 ALSA default (on)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 2 ALSA crossfeed (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 3 ALSA parametric eq (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 4 ALSA graphic eq (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 5 ALSA polarity inversion (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 6 ALSA bluetooth (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD output 7 HTTP stream (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: MPD crossfade (off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: -- Feature availability[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Source select (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Source select (source: MPD)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Source select (output: MERUS(tm) Amp piHAT ZW)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Bluetooth (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Airplay renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Spotify renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Squeezelite renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: UPnP renderer (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: DLNA server (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: UPnP browser (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: Audio scrobbler (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: GPIO button handler (available)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144047 worker: -- Music sources[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: USB sources (none attached)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: NAS and UPnP sources (none configured)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: -- Miscellaneous[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: USB volume knob (Off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: USB auto-mounter (udisks-glue)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: LED0 (On)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: LED1 (On)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Saved MPD vol level (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Preamp volume level (0)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: MPD volume level (20) restored[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: ALSA volume level (None)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Auto-play (Off)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Maintenance interval (3 hrs)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Screen saver activation (Never)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Session permissions (OK)[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Watchdog started[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144048 worker: Ready[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144125 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144131 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144137 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144202 watchdog: Wlan0 down attempting reset[/font][/size][/color]
[color=#000000][size=x-small][font=Menlo]20201027 144609 worker: Job mpdcfg[/font][/size][/color]
20201027 144616 worker: Job mpdcfg



Code:
dmesg | grep MerusAmp
[    7.210976] snd-rpi-simple soc:sound: ASoC: failed to init link MerusAmp: -517
[    7.505437] snd-rpi-simple soc:sound: ASoC: failed to init link MerusAmp: -517
[    7.518429] snd-rpi-simple soc:sound: ASoC: failed to init link MerusAmp: -517
Find
Reply


Messages In This Thread
Issue with Merus HAT after 6.52 - by rollinhand - 10-12-2020, 08:26 AM
RE: Issue with Merus HAT after 6.52 - by OlafM - 10-27-2020, 07:16 PM
RE: Issue with Merus HAT after 6.52 - by OlafM - 11-01-2020, 06:56 PM

Forum Jump: