03-02-2023, 10:19 PM
(03-02-2023, 09:32 PM)Nutul Wrote:tnks Nutul 4 U'r support it's apprecited!(03-02-2023, 09:07 PM)AndromedaStrain Wrote:(03-01-2023, 10:03 AM)Nutul Wrote:(03-01-2023, 12:48 AM)AndromedaStrain Wrote:(03-01-2023, 12:15 AM)Tim Curtis Wrote: You should post those images along with a description of the issue in the Waveshare Forum.
related your suggestion I've open a tiket support some an a tecnician is managing this case ... but is a hard situation because also there is a jet lag that complicate moreover the comunication
however I take your suggestion seriously, in the forum other people may have already solved the problem
but if any person have suggestions to solve the problem i will thank
mmm, 270 and 90 are the same thing, just upside-down...
I'd try 180 as well, this will supposedly turn 90-deg ccwise, which is what you want.
I've try this too but not work...
in bootPhase do the scroll lines from rh to lh as is
in MoOde GUI instead the inerface is that
so... the display can actually be rotated in any of the four directions, and the text orientation proves it.
It looks like moode assumes it to be thin and tall, rather than thin and wide...
Or the framebuffer can be configured the correct way (using the orientation parameter), while the reported viewport never changes to 1280 x 400, and always remains at 400 x 1280, indicating vertical orientation only...
video=DSI-1:400x1280e,rotate=270 console [...]
maybe setting the above to video=DSI-1:1280x400e,rotate=270 changes anything? Just wandering wild here, but seeing you always report the viewport being 400x1280 I begin thinking it may be defined somewhere...
Let me know, looks an interesting task...
I've try also to write ...
video=DSI-1:1280x400e,rotate=270 console [...]
but result was a black screen
with
video=DSI-1:1280x400e,rotate=0 console [...]
video=DSI-1:1280x400e,rotate=90 console [...]
video=DSI-1:1280x400e,rotate=180 console [...]
do as
ph1 and ph1 in my past post #13
.. .i've forced tho show of viewport... with SSH command
moodeutl -q "update cfg_system set value='viewport' where param='pkgid_suffix'"
and for all the viewport (0, 90, 180) the popup showed 400x1280
that's as appear as is the MoOde system force these viewport .....