[SOLVED] Configuring Windows To Access Moode USB Drive

[kurek]

SOLVED - see this post http://moodeaudio.org/forum/showthread.p...3#pid20653

----------------------------------------------------------------------------------------------------------------------------------------



I've been trying to help myself here most of the day, time to tap myself out and ask for help.

• Raspberry Pi 3B running Moode with an attached USB hard drive
  
• I am able to connect to the USB hard drive over the network from one Windows 10 PC,  read/write, etc  at  \\10.0.0.215\PINAS\    (the local IP and share name)
  
• I am able to connect to the USB hard drive over the network from a second pi running Volumio at the same address
  
• I am able to connect to the web interface of the Moode device at http://10.0.0.215/ from everywhere.
  
  

This indicates the Moode device is configured correctly.

What I cannot do is access the USB drive from any other Windows 10 devices in my houses (er, two of them) -  on both I have enabled smb1 but beyond that I'm not really getting anywhere.   I have not been able to find any obvious differences in how the Windows 10 devices are configured,  just that one is able to access the drive and none of the other ones are. 

Suggestions?

Thanks