[SOLVED] UPnP - CamillaDSP

[klausimausi04]

Hello,

I have the following behaviour since switching to Moode 7.1.0:

When streaming to Moode UPnP without activating CamillaDSP, everything runs as expected.

After activating CamillaDSP (configuration: "Quick Convolution Filter" e.g. with the supplied IRs), the music source cannot be changed (e.g. select another album) because Moode UPnP is no longer found.
Restarting the renderer helps until the next attempt to change.

After deactivating CamillaDSP (and restarting Moode UPnP) everything runs normally again.

- Raspberry Pi-3B 1.2 1GB mit DACBerry PRO (OSA Electronics)
- Moode 7.1.0 - New Installation
- I2S audio device configured as  IQaudiO DAC+
- UPnP Client for MPD on (UPnP A/V  yes, OpenHome yes, Check content format no)
- Control point: Android Samsung Galaxy S10+
- Software: Neutron Music Player Pro (2.16.2), also tested BubbleUPnP and Hi-Fi Cast (same behavior)

Output from moodeutl -l

Code:

pi@moode:~ $ moodeutl -l
20210329 130656 worker: -- Start
20210329 130656 worker: Successfully daemonized
20210329 130656 worker: Integrity check (passed)
20210329 130657 worker: File check (OK)
20210329 130657 worker: Session vacuumed
20210329 130657 worker: Session loaded
20210329 130657 worker: Debug logging (ON)
20210329 130657 worker: -- Device
20210329 130657 worker: ALSA cards: (0:IQaudIODAC | 1:empty | 2:empty | 3:empty
20210329 130657 worker: MPD config: (0:IQaudIO Pi-DAC PRO | mixer:(Digital) | ca                                                                   rd:0)
20210329 130657 worker: ALSA mixer actual (Digital)
20210329 130658 worker: ALSA Digital volume set to (0%)
20210329 130658 worker: -- System
20210329 130700 worker: Host     (moode)
20210329 130700 worker: moOde    (7.1.0 2021-03-15)
20210329 130700 worker: RaspiOS  (10.6)
20210329 130700 worker: Kernel   (5.4.77-v7+ #1371)
20210329 130700 worker: Platform (Pi-3B 1.2 1GB)
20210329 130700 worker: ARM arch (armv7l, 32-bit kernel)
20210329 130700 worker: MPD ver  (0.22.6_p0x3)
20210329 130700 worker: CPU gov  (ondemand)
20210329 130700 worker: USB boot enabled
20210329 130700 worker: File system expanded
20210329 130700 worker: HDMI port on
20210329 130700 worker: -- Network
20210329 130700 worker: eth0 exists
20210329 130700 worker: IP addr (192.xxx.xxx.xx)
20210329 130700 worker: Netmask (255.xxx.xxx.x)
20210329 130700 worker: Gateway (192.xxx.xxx.x)
20210329 130700 worker: Pri DNS (192.xxx.xxx.x)
20210329 130700 worker: Domain  (xxxxx.xxx)
20210329 130700 worker: wlan0 exists
20210329 130700 worker: Pi integrated wlan0 power save disabled
20210329 130700 worker: wifi country (DE)
20210329 130700 worker: wlan0 trying SSID (...)
20210329 130700 worker: IP addr (192.xxx.xxx.xx)
20210329 130700 worker: Netmask (255.xxx.xxx.x)
20210329 130700 worker: Gateway (192.xxx.xxx.x)
20210329 130700 worker: Pri DNS (192.xxx.xxx.x)
20210329 130700 worker: Domain  (xxxxx.xxx)
20210329 130700 worker: -- Audio
20210329 130701 worker: MPD conf updated
20210329 130701 worker: ALSA card number (0)
20210329 130701 worker: MPD audio output (IQaudIO Pi-DAC PRO)
20210329 130701 worker: Audio formats (S16_LE, S24_LE, S32_LE)
20210329 130701 worker: ALSA mixer name (Digital)
20210329 130701 worker: MPD volume control (software)
20210329 130701 worker: Hdwr volume controller exists
20210329 130701 worker: Max ALSA volume (100%)
20210329 130701 worker: Reset renderer active flags
20210329 130701 worker: CamillaDSP (__quick_convolution__.yml)
20210329 130701 worker: -- MPD
20210329 130701 worker: MPD started
20210329 130701 openMpdSocket(): error: connection failed (1) 111, Connection refused
20210329 130702 worker: MPD accepting connections
20210329 130702 worker: MPD output 1 ALSA Default (off)
20210329 130702 worker: MPD output 2 ALSA Crossfeed (off)
20210329 130702 worker: MPD output 3 ALSA Parametric EQ (off)
20210329 130702 worker: MPD output 4 ALSA Graphic EQ (off)
20210329 130702 worker: MPD output 5 ALSA Polarity Inv (off)
20210329 130702 worker: MPD output 6 ALSA CamillaDSP (on)
20210329 130702 worker: MPD output 7 ALSA Bluetooth (off)
20210329 130702 worker: MPD output 8 HTTP Server (off)
20210329 130702 worker: MPD crossfade (off)
20210329 130702 worker: MPD ignore CUE files (yes)
20210329 130702 worker: -- Feature availability
20210329 130702 worker: Source select (available)
20210329 130702 worker: Source select (source: MPD)
20210329 130702 worker: Source select (output: IQaudIO Pi-DAC PRO)
20210329 130702 worker: Bluetooth (available)
20210329 130702 worker: Airplay renderer (available)
20210329 130702 worker: Spotify renderer (available)
20210329 130702 worker: Squeezelite (available)
20210329 130702 worker: RoonBridge renderer (not installed)
20210329 130702 worker: UPnP renderer (available: started)
20210329 130702 worker: DLNA server (available)
20210329 130702 worker: UPnP browser (available)
20210329 130702 worker: GPIO button handler (available)
20210329 130702 worker: Stream recorder (n/a)
20210329 130702 worker: -- Music sources
20210329 130702 worker: USB sources (none attached)
20210329 130706 sourceMount(): Command=(mount -t cifs "//RASPBERRYPI/Festplatten" -o username="Guest",password="",rsize=61440,wsize=65536,iocharset=utf8,vers=3.                                                                   1.1,ro,dir_mode=0777,file_mode=0777 "/mnt/NAS/raspi3")
20210329 130706 worker: NAS and UPnP sources (mountall initiated)
20210329 130706 worker: -- Miscellaneous
20210329 130706 worker: USB volume knob (Off)
20210329 130706 worker: Shellinabox SSH started
20210329 130706 worker: USB auto-mounter (udisks-glue)
20210329 130706 worker: LED0 (On)
20210329 130706 worker: LED1 (On)
20210329 130706 worker: Saved MPD vol level (0)
20210329 130706 worker: Preamp volume level (0)
20210329 130706 worker: MPD volume level (36) restored
20210329 130706 worker: ALSA Digital volume (100%)
20210329 130706 worker: Auto-play (Off)
20210329 130706 worker: Maintenance interval (3 hrs)
20210329 130706 worker: Screen saver activation (Never)
20210329 130706 worker: Session permissions (OK)
20210329 130706 worker: Watchdog started
20210329 130706 worker: Ready
20210329 130820 waitWorker(): Start (snd-config, w_active=0)
20210329 130820 waitWorker(): End   (snd-config, w_active=0)

Kind Regards
Klaus