08-29-2018, 02:20 PM
Nice DIY rig :-)
I think both MPD stop and pause close the audio output. MPD retains the songs time position when paused. When stopped MPD uses time position 0 (beginning) when play resumes.
From what I've read, best I2S interconnect should be made from U.FL micro coax cables to prevent signal degradation and EMI. Iancanada's Twitter feed has pics and info regarding U.FL cable assy and an adapter for Raspberry Pi that fits on top of the 40 pin header.
https://twitter.com/iancanadatt?lang=en
http://www.diyaudio.com/forums/group-buy...t-buy.html
I've also been told that the thin copper wires from CAT5 or higher Ethernet cable can be used for I2S interconnect. The person that mentioned this said that this wire is high quality and engineered for high frequency signal transmission. He said each wire should be twisted with a GND wire. I've never tried it so I can't say one way or the other how it performs.
-Tim
I think both MPD stop and pause close the audio output. MPD retains the songs time position when paused. When stopped MPD uses time position 0 (beginning) when play resumes.
From what I've read, best I2S interconnect should be made from U.FL micro coax cables to prevent signal degradation and EMI. Iancanada's Twitter feed has pics and info regarding U.FL cable assy and an adapter for Raspberry Pi that fits on top of the 40 pin header.
https://twitter.com/iancanadatt?lang=en
http://www.diyaudio.com/forums/group-buy...t-buy.html
I've also been told that the thin copper wires from CAT5 or higher Ethernet cable can be used for I2S interconnect. The person that mentioned this said that this wire is high quality and engineered for high frequency signal transmission. He said each wire should be twisted with a GND wire. I've never tried it so I can't say one way or the other how it performs.
-Tim
