09-11-2018, 07:41 AM
Hello Bob,
I had a 20x4 display in addition to the 16x2. I have been testing on a Pi2B with Moode 3.8.4.
Changed displays and repeated Step 3: sudo python configure.py and edited the "pages_lcd_20x4.py" file. No problems and works on address 0x27.
I am also powering the display and backpack with 5 Volts only to the backpack without problems.
pydPiper starts less than a minute after moOde boots.
Next move is to install on Pi 3B+ with moOde 4.2 and using a level converter as described at:
https://www.raspberrypi-spy.co.uk/2015/0...pberry-pi/
Richard.
I had a 20x4 display in addition to the 16x2. I have been testing on a Pi2B with Moode 3.8.4.
Changed displays and repeated Step 3: sudo python configure.py and edited the "pages_lcd_20x4.py" file. No problems and works on address 0x27.
I am also powering the display and backpack with 5 Volts only to the backpack without problems.
pydPiper starts less than a minute after moOde boots.
Next move is to install on Pi 3B+ with moOde 4.2 and using a level converter as described at:
https://www.raspberrypi-spy.co.uk/2015/0...pberry-pi/
Richard.