External SSD not recognised

[kaytata]

I just unplugged and plugged the SSD again and run dmesg and I found that
my adapter has this label: Norelsys NS1068. I hope this helps.
This is part of the result:

[ 4993.511324] sd 0:0:0:0: [sdb] Attached SCSI disk
[ 5112.814589] usb 1-1.4.1: USB disconnect, device number 16
[ 5118.570969] usb 1-1.4: USB disconnect, device number 15
[ 5118.570978] usb 1-1.4.2: USB disconnect, device number 17
[ 5119.009559] usb 1-1.4.3: USB disconnect, device number 18
[11636.621569] usb 1-1.4: new high-speed USB device number 19 using dwc_otg
[11636.752276] usb 1-1.4: New USB device found, idVendor=2537, idProduct=1068
[11636.752283] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[11636.752288] usb 1-1.4: Product: NS1068
[11636.752292] usb 1-1.4: Manufacturer: Norelsys
[11636.752296] usb 1-1.4: SerialNumber: 0123456789ABCDE
[11636.752734] usb-storage 1-1.4:1.0: USB Mass Storage device detected
[11636.754706] scsi host0: usb-storage 1-1.4:1.0
[11639.296912] scsi 0:0:0:0: Direct-Access ATA KINGSTON SA400S3 61K1 PQ: 0 ANSI: 6
[11639.297434] sd 0:0:0:0: Attached scsi generic sg1 type 0
[11639.298191] sd 0:0:0:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
[11639.298488] sd 0:0:0:0: [sdb] Write Protect is off
[11639.298499] sd 0:0:0:0: [sdb] Mode Sense: 43 00 00 00
[11639.298792] sd 0:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[11639.309981] sdb: sdb1 sdb2
[11639.313394] sd 0:0:0:0: [sdb] Attached SCSI disk