Moode audio on rpi 3 won't boot after enabling driver

[OhOli]

Hi,
So i tried using the Raspberry Pi 3 with the Allo Boss DAC.
I went to the audio configuration and chose the Allo Boss. As instructed I then restarted the device (it started just fine) and then enabled the driver one row beneath the i2s in the audio configuration. Ait then asked me to reboot and i i restart again but now it won't boot.

[Tim Curtis]

What does this mean

"and then enabled the driver one row beneath the i2s in the audio configuration."

[OhOli]

What does this mean

"and then enabled the driver one row beneath the i2s in the audio configuration."

Under "driver options" i enabled slave.

[Tim Curtis]

This is a bug :-0

To revert to "slave Disabled" run the commands below.

Code:

sudo sed -i 's/allo-boss-dac-pcm512x-audio,slave/allo-boss-dac-pcm512x-audio/' /boot/config.txt

sqlite3 /var/local/www/db/moode-sqlite3.db "update cfg_audiodev set driver='allo-boss-dac-pcm512x-audio' where name='Allo Boss DAC'"

sudo reboot

This will be fixed in upcoming 6.7.1 bug fix update but until then the Boss/MiniBoss slave option and the Piano glb_mclk option will cause breakage.

[OhOli]

This is a bug :-0

To revert to "slave Disabled" run the commands below.

Code:

sudo sed -i 's/allo-boss-dac-pcm512x-audio,slave/allo-boss-dac-pcm512x-audio/' /boot/config.txt

sqlite3 /var/local/www/db/moode-sqlite3.db "update cfg_audiodev set driver='allo-boss-dac-pcm512x-audio' where name='Allo Boss DAC'"

sudo reboot

This will be fixed in upcoming 6.7.1 bug fix update but until then the Boss/MiniBoss slave option and the Piano glb_mclk option will cause breakage.

Thank you !!