Posts: 6,021
Threads: 176
Joined: Apr 2018
Reputation:
235
(04-02-2022, 02:50 PM)Tim Curtis Wrote: It's prolly cos when doing "sudo echo" the echo won't run as root due to how the shell functions.
Try piping instead
Code: # Write/overwrite
echo "Some text" | sudo tee /directory/.mpdignore >/dev/null
# Append
echo "Some text" | sudo tee -a /directory/.mpdignore >/dev/null
# NOTE: The >/dev/null is just to prevent the text from being echoed to the console.
Good point. I was fixated on actually editing a file or copying it in from somewhere else.
Posts: 2
Threads: 1
Joined: Apr 2022
Reputation:
0
Hey There,
Since updating to version 8.0.2, I am unable to get any sound through the IQadIO Pi-DigiAMP+ attached to a Raspberry Pi Zero w v1.1. The system has been working absolutely fine for about two years. I am running 8 Players across the entire house, and all of them are updated without any issues apart from this particular one.
What I have tried so far
- Of course I checked whether the module itself is broken by running it of a Pi 4 8GB and Pi 3 on version 8. It works fine with the two larger Pi's.
- I have also tried it with a brand new Pi Zero 2 (Unused new out of the package), and I haven't managed to get it going either.
- To be absolutely sure I also tried it on an IQaudIO Pi-DAC+ I have kicking about. It didn't work either using both the Pi Zero and the Pi Zero 2
- I have reverted the Pi in question to version 7.6.1 to realise that this doesn't work anymore on both Pi's and both the AMP and the DAC.
- There is one other identical instance running, and updated with the same setup, and this is working, which I find weird.
- It appears to have a connection to the IQadIO Pi-DigiAMP+, which I have checked over the command line.
- The mute LED is off on the IQadIO Pi-DigiAMP+ board.
I am wondering whether anyone here has encountered a similar problem?
Thanks very much already.
Rafael
Posts: 13,414
Threads: 304
Joined: Mar 2018
Reputation:
543
Since in your post its stated that another identical system (Zero W, Pi-DigiAMP+, moOde 8.0.2 ) is working we can rule out a moOde software or OS/kernel issue.
On the non-working system try:
1. Apply some contact cleaner or alcohol on the pins and in the sockets of the 40-pin connector.
2. Swap in a different power supply.
Posts: 75
Threads: 10
Joined: Mar 2020
Reputation:
0
I'm still hunting down my i2s sync error issues and in so I keep coming across this, assumed to be unrelated, error when I am looking through the /syslog
Code: Apr 3 15:43:24 moode winbindd[647]: [2022/04/03 15:43:24.362424, 0] ../../source3/rpc_server/rpc_ncacn_np.c:454(rpcint_dispatch)
Apr 3 15:43:24 moode winbindd[647]: rpcint_dispatch: DCE/RPC fault in call lsarpc:32 - DCERPC_NCA_S_OP_RNG_ERROR
Apr 3 15:43:24 moode winbindd[647]: [2022/04/03 15:43:24.364199, 0] ../../source3/rpc_server/rpc_ncacn_np.c:454(rpcint_dispatch)
Apr 3 15:43:24 moode winbindd[647]: rpcint_dispatch: DCE/RPC fault in call lsarpc:32 - DCERPC_NCA_S_OP_RNG_ERROR
I cleared the /syslog then added my NFS server within MoOde and this immediately appeared. Not sure if it's related. The NFS server works as prescribed (apart from my weird 24/96 issues linked above).
I've reflashed 8.0.2 twice.
Thanks!
David
Code: S Y S T E M P A R A M E T E R S
moOde release = 8.0.2 2022-03-25
RaspiOS = 11.2
Linux kernel = 5.15.28-v7+ #1532
Platform = Pi-3B+ 1.3 1GB
Architecture = armv7l (32-bit)
System uptime = up 13 minutes
Timezone = America/Kentucky/Louisville
Current time = 2022-04-03 15:51:59
Host name = moode
Ethernet address = 192.168.1.137
Ethernet MAC = b8:27:eb:c8:f2:03
WLAN address = unassigned
WLAN MAC = b8:27:eb:9d:a7:56
WLAN country = US
SoC identifier = bcm2837
Core count = 4
Kernel timer freq = 100 Hz
SDCard freq = 50 MHz
USB boot = enabled
Warranty = OK
Root size = 15G
Root used = 20%
Root available = 12G
Root expand = expanded
Memory total = 945 MB
Memory free = 775 MB
Memory used = 170 MB
SoC temperature = 51.5°C
Throttled bitmask = 0x0
Throttled text = No throttling has occurred
CPU governor = ondemand
Onboard WiFi = On
Onboard BT = On
HDMI output = On
LED state = 1,1
IP addr timeout = 90 (secs)
Ethernet check = No
USB auto-mounter = udisks-glue
SSH term server = On
PHP-FPM version = 7.4.28
NGINX version = 1.18.0
SQLite3 version = 3.34.1
Hostapd version = 2.9
RPi.GPIO version = 0.7.0
A U D I O P A R A M E T E R S
Audio device = Allo DigiOne
Interface = I2S
Mixer name = none
Hardware mixer = No
Supported formats = S16_LE, S24_LE
ALSA max volume = 100
ALSA output mode = Direct (hw)
ALSA loopback = Off
MPD max volume = 100
Volume step limit = 10
Display dB volume = Off
Audio source = Local
Output device = Local
Resume MPD = No
Volume knob = 0
Volume mute = Unmuted
Saved MPD vol = 0
Preamp volume = 0
ALSA version = 1.2.4-1.1+rpt2
SoX version = 0.1.3-4+rpi1
Bluetooth controller = Off
Pairing agent = Off
Airplay receiver = Off
Spotify receiver = Off
Squeezelite = Off
RoonBridge = Not installed
UPnP client = Off
DLNA server = Off
GPIO button handler = Off
Multiroom sender = Off
Multiroom receiver = Disabled
UPnP browser = Off
Auto-shuffle = Off
Ashuffle mode = Track
Ashuffle filter = None
Autoplay = Off
Rotary encoder = Off
Encoder params = 100 2 3 23 24
USB volume knob = Off
Polarity inversion = Off
Crossfeed = Off
Crossfade = Off
Parametric EQ = Off
Graphic EQ = Off
CamillaDSP = off
MPD httpd = Off
Ignore CUE files = Yes
P R E F E R E N C E S
Appearance
----------------------
Theme = Default
Accent color = Carrot
Alpha blend = 1.0
Adaptive background = No
Background image = No
Cover backdrop = No
Cover blur = 20px
Cover scale = 1.25
Renderer backdrop = No
Font size = Normal
Playback
----------------------
Show Queue thumbs = Yes
Show Now-playing icon = Yes
Show CoverView playbar = Yes
Show extra metadata = album,genre,track,disc,date,composer,conductor,performer,encoded
Search site = Google
Playback history log = No
Library
----------------------
One touch album = Play
One touch radio = Play
Albumview sort order = by Artist
Tagview sort order = by Artist
Recently added = 1 Month
Show sample rate = No
Cover search pri = Embedded cover
Pixel ratio = 1
Thumbnail resolution = Auto
Thumbnail columns = 6/2 (Default)
Library (Advanced)
----------------------
Tag view genre = Genres
Tag view artist = Artist
Album key = Album@Artist (Default)
Include comment tag = No
Library filter = full_lib
Library filter str =
Ignore articles = a,an,the
Show tagview genres = Yes
Show tagview covers = Yes
Ellipsis limited text = No
UTF8 character filter = No
CoverView
----------------------
Automatic display = Never
Backdrop style = Gradient (Linear)
R A D I O M A N A G E R S E T T I N G S
Sort tag = Name
Group method = No grouping
Show moOde stations = No action
Show other stations = No action
M P D S E T T I N G S
Version = 0.23.5
Volume type = software
SoX resampling = disabled
Selective resampling = disabled
SoX quality = high
SoX multithreading = off
DSD over PCM (DoP) = no
Replaygain = off
Replaygain preamp = 0
Volume normalization = no
Audio buffer = 4 (MB)
Output buffer size = 128 (MB)
Max playlist items = 16384
Input cache = Disabled
B L U E T O O T H S E T T I N G S
Version = 5.55
Bluealsa = v3.0.0
Pairing agent = 1.0.0
Pi-Bluetooth = 0.1.18
Speaker sharing = No
Resume MPD = No
PCM buffer time = 500000 (μs)
A I R P L A Y S E T T I N G S
Version = 3.3.8
Friendly name = Moode Airplay
Interpolation = soxr
Output bit depth = S16
Output sample rate = 44100
Session interruption = no
Session timeout = 120 (ms)
Latency offset = 0.0 (secs)
Audio buffer = 0.2 (secs)
Resume MPD = No
S P O T I F Y S E T T I N G S
Version = 0.3.1
Friendly name = Moode Spotify
Bitrate (kbps) = 160
Format = S16
Dither = Automatic (Default)
Volume curve = log
Volume range (dB) = 60
Initial volume (%) = 0
Volume normalization = No
Method = dynamic
Gain type = auto
Pregain (dB) = 0
Threshold (dBFS) = -2
Attack (ms) = 5
Release (ms) = 100
Knee = 1
Autoplay = No
Resume MPD = No
S Q U E E Z E L I T E S E T T I N G S
Version = 1.9.8-1317 "DSD/SRC enabled"
Friendly name = Moode
ALSA device = hw:0
ALSA params = 80:4::1
Output buffers = 40000:100000
Task priority = 45
Codec list = flac,pcm,mp3,ogg,aac,alac,dsd
Other options = -W -D 500 -R E -S /var/local
Resume MPD = No
L O C A L D I S P L A Y S E T T I N G S
Local UI display = Off
Mouse cursor = On
Screen blank = 600 Secs
Wake display on play = Off
Brightness = 255
Pixel aspect ratio = Default
Rotate screen = 0 Deg
M O O D E S T A R T U P L O G
20220403 153823 worker: --
20220403 153823 worker: -- Start moOde 8 series
20220403 153823 worker: --
20220403 153823 worker: Successfully daemonized
20220403 153827 worker: File check (OK)
20220403 153827 worker: Session vacuumed
20220403 153827 worker: Session loaded
20220403 153827 worker: Debug logging (OFF)
20220403 153827 worker: --
20220403 153827 worker: -- Audio debug
20220403 153827 worker: --
20220403 153827 worker: ALSA cards: (0:sndallodigione | 1:empty | 2:empty | 3:empty
20220403 153827 worker: MPD config: (0:Allo DigiOne | mixer:(HDMI) | card:0)
20220403 153827 worker: ALSA mixer actual (none)
20220403 153827 worker: ALSA volume (none)
20220403 153827 worker: --
20220403 153827 worker: -- System
20220403 153827 worker: --
20220403 153829 worker: Host (moode)
20220403 153830 worker: moOde (8.0.2 2022-03-25)
20220403 153830 worker: RaspiOS (11.2)
20220403 153830 worker: Kernel (5.15.28-v7+ #1532)
20220403 153830 worker: Platform (Pi-3B+ 1.3 1GB)
20220403 153830 worker: ARM arch (armv7l, 32-bit)
20220403 153830 worker: MPD ver (0.23.5)
20220403 153830 worker: CPU gov (ondemand)
20220403 153830 worker: USB boot (enabled)
20220403 153830 worker: File sys (expanded)
20220403 153830 worker: HDMI port (On)
20220403 153830 worker: Sys LED0 (On)
20220403 153830 worker: Sys LED1 (On)
20220403 153830 worker: --
20220403 153830 worker: -- Network
20220403 153830 worker: --
20220403 153830 worker: eth0 adapter exists
20220403 153830 worker: eth0 wait for address (No)
20220403 153830 worker: IP addr (192.168.1.137)
20220403 153830 worker: Netmask (255.255.255.0)
20220403 153830 worker: Gateway (192.168.1.1)
20220403 153830 worker: Pri DNS (192.168.1.1)
20220403 153830 worker: Domain ()
20220403 153830 worker: wlan0 adapter exists
20220403 153830 worker: wlan0 country (US)
20220403 153830 worker: wlan0 SSID is blank
20220403 153830 worker: wlan0 AP mode not started (eth0 active)
20220403 153830 worker: wlan0 address not assigned
20220403 153830 worker: wlan0 power save disabled
20220403 153830 worker: --
20220403 153830 worker: -- Audio config
20220403 153830 worker: --
20220403 153831 worker: MPD conf updated
20220403 153831 worker: ALSA card number (0)
20220403 153831 worker: MPD audio output (Allo DigiOne)
20220403 153831 worker: Audio formats (S16_LE, S24_LE)
20220403 153831 worker: ALSA mixer name (none)
20220403 153831 worker: MPD mixer type (software)
20220403 153831 worker: Hdwr volume controller not detected
20220403 153831 worker: ALSA output mode (Default: plughw)
20220403 153831 worker: ALSA loopback (Off)
20220403 153831 worker: Reset renderer active flags
20220403 153831 worker: CamillaDSP (off)
20220403 153831 worker: --
20220403 153831 worker: -- MPD startup
20220403 153831 worker: --
20220403 153832 worker: MPD started
20220403 153832 worker: MPD accepting connections
20220403 153832 worker: MPD output 1 ALSA Default (on)
20220403 153832 worker: MPD output 2 ALSA Bluetooth (off)
20220403 153832 worker: MPD output 3 HTTP Server (off)
20220403 153832 worker: MPD crossfade (off)
20220403 153832 worker: MPD ignore CUE files (yes)
20220403 153832 worker: --
20220403 153832 worker: -- Feature availability
20220403 153832 worker: --
20220403 153832 worker: Source select (available)
20220403 153832 worker: Source select (source: MPD)
20220403 153832 worker: Source select (output: Allo DigiOne)
20220403 153832 worker: Bluetooth (available)
20220403 153832 worker: Airplay renderer (available)
20220403 153832 worker: Spotify renderer (available)
20220403 153832 worker: Squeezelite (available)
20220403 153832 worker: RoonBridge renderer (not installed)
20220403 153832 worker: Multiroom sender (available)
20220403 153832 worker: Multiroom receiver (available)
20220403 153832 worker: UPnP renderer (available)
20220403 153832 worker: DLNA server (available)
20220403 153832 worker: UPnP browser (available)
20220403 153832 worker: GPIO button handler (available)
20220403 153832 worker: Stream recorder (n/a)
20220403 153832 worker: --
20220403 153832 worker: -- Music sources
20220403 153832 worker: --
20220403 153832 worker: USB sources (none attached)
20220403 153832 worker: NAS and UPnP sources (none configured)
20220403 153832 worker: --
20220403 153832 worker: -- Other
20220403 153832 worker: --
20220403 153832 worker: USB volume knob (Off)
20220403 153832 worker: Shellinabox SSH started
20220403 153832 worker: USB auto-mounter (udisks-glue)
20220403 153832 worker: Saved MPD vol level (0)
20220403 153832 worker: Preamp volume level (0)
20220403 153832 worker: MPD volume level (0) restored
20220403 153832 worker: ALSA volume level (None)
20220403 153832 worker: Auto-play (Off)
20220403 153832 worker: Maintenance interval (120 minutes)
20220403 153832 worker: Screen saver activation (Never)
20220403 153832 worker: Session permissions (OK)
20220403 153832 worker: Watchdog started
20220403 153832 worker: Ready
20220403 153835 worker: Job alsa_output_mode
20220403 154116 worker: Job clearsyslogs
20220403 154325 worker: Job sourcecfg
Posts: 6,021
Threads: 176
Joined: Apr 2018
Reputation:
235
(04-03-2022, 07:53 PM)Lttlwing16 Wrote: I'm still hunting down my i2s sync error issues and in so I keep coming across this, assumed to be unrelated, error when I am looking through the /syslog
Code: Apr 3 15:43:24 moode winbindd[647]: [2022/04/03 15:43:24.362424, 0] ../../source3/rpc_server/rpc_ncacn_np.c:454(rpcint_dispatch)
Apr 3 15:43:24 moode winbindd[647]: rpcint_dispatch: DCE/RPC fault in call lsarpc:32 - DCERPC_NCA_S_OP_RNG_ERROR
Apr 3 15:43:24 moode winbindd[647]: [2022/04/03 15:43:24.364199, 0] ../../source3/rpc_server/rpc_ncacn_np.c:454(rpcint_dispatch)
Apr 3 15:43:24 moode winbindd[647]: rpcint_dispatch: DCE/RPC fault in call lsarpc:32 - DCERPC_NCA_S_OP_RNG_ERROR
... I can't speak to your 24/96 issue but this output to the syslog is known to the moOde devs. It started showing up with the bump to Raspberry Pi OS 11 (bullseye) and, yes, It's not related. Sooner or later we'll figure out why it's occurring. I showed it could be eliminated simply by not including winbind (wins) in the network services but we're not certain we want to do that.
Regards,
Kent
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
04-04-2022, 06:18 AM
(This post was last modified: 04-04-2022, 06:39 AM by dad33.)
Hello community, hello Tim,
2 days ago i update to the new V8.
My Hardware: raspberry pi4B with ALLO Boss DAC2
I always select Mixter Type: Hardware cause it sound better than software.
When i rotate the volume controller the sound stops sometimes, hanging.
In Moode 7 it always works fine.
Is that a bug that might be fixed?
Thank you.
Posts: 13,414
Threads: 304
Joined: Mar 2018
Reputation:
543
I have a Boss 2 but don't recall experiencing the issue you described. I can run some tests today.
When you mention "the sound stops sometimes, hanging." what does "hanging" mean? Do you have to reboot or power cycle the system?
it occurs again, open an SSH terminal and post the output from the commands below.
Code: mpc status
amixer -c0
Posts: 14
Threads: 0
Joined: Jul 2020
Reputation:
1
(04-02-2022, 02:03 PM)Tim Curtis Wrote: (04-02-2022, 07:42 AM)Frank79 Wrote: Bug description:
No sound at all whenever I start streaming FLACs from my NAS.
Then, when I play with the volume knob:
- Sound comes out from left speaker only
- sometimes from both speakers, but with something like a 90/10% level balance
- or bad rendition (either way too much bass, bass distortion or "cold" sound)
Absolutely no issue when streaming from Spotify.
My setup:
HifiBerry DAC2 HD hat on Raspberry Pi 4 Model B
In Audio Config
- Set DT overlay to None
- Reboot
- Set DT overlay to hifibery-dacplushd
- Reboot
Post the output from the commands below.
Code: cat /boot/config.txt
amixer -c0
Please note that I can't reproduce the issue anymore. Launched my raspberry this morning and sound was OK on both speakers/channels. Might be a false positive or I got something wrong at the first time.
Anyway, here's the output you asked for. Thank you Tim!
Code: pi@moode-salon:~ $ cat /boot/config.txt
[cm4]
otg_mode=1
[pi4]
hdmi_force_hotplug:0=1
hdmi_force_hotplug:1=1
[all]
disable_splash=1
disable_overscan=1
hdmi_drive=2
hdmi_blanking=1
hdmi_force_edid_audio=1
hdmi_force_hotplug=1
hdmi_group=0
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=hifiberry-dacplushd
force_eeprom_read=0
#dtoverlay=disable-wifi
#dtoverlay=disable-bt
pi@moode-salon:~ $ amixer -c0
Simple mixer control 'DAC',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 240
Mono:
Front Left: Playback 240 [100%] [0.00dB]
Front Right: Playback 240 [100%] [0.00dB]
Simple mixer control 'DAC Invert Output',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'DAC Rolloff Filter',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Posts: 48
Threads: 7
Joined: Jan 2021
Reputation:
0
04-04-2022, 02:50 PM
(This post was last modified: 04-04-2022, 03:24 PM by dad33.)
(04-04-2022, 09:59 AM)pi@moodeWohn:~ $ amixer -c0 Wrote: I tested on an Apple Air pad also, here the feedback is a little bit faster. The music isn't playing gapless when i rotate the volume controll faster. I think Frank79 and I have the same problem. Some steps on the volume rotation
switch to 0% volume, told me the mpc status, see attached picture..
Here is the output from the command:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [-0.50dB] [on]
Front Right: Playback 254 [100%] [-0.50dB] [on]
Simple mixer control 'PCM De-emphasis Filter',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM Filter Speed',0
Capabilities: enum
Items: 'Fast' 'Slow'
Item0: 'Fast'
Simple mixer control 'PCM High-pass Filter',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'PCM Nonoversample Emulate',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM Phase Compensation',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Digital',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB] [on]
Front Right: Playback 255 [100%] [0.00dB] [on]
Simple mixer control 'HV_Enable',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Tim CurtisI have a Boss 2 but don't recall experiencing the issue you described. I can run some tests today.
When you mention "the sound stops sometimes, hanging." what does "hanging" mean? Do you have to reboot or power cycle the system?
it occurs again, open an SSH terminal and post the output from the commands below.
Code: mpc status
amixer -c0
Posts: 13,414
Threads: 304
Joined: Mar 2018
Reputation:
543
04-04-2022, 03:42 PM
(This post was last modified: 04-04-2022, 09:24 PM by Tim Curtis.
Edit Reason: eta
)
(04-04-2022, 02:50 PM)dad33 Wrote:
(04-04-2022, 09:59 AM)pi@moodeWohn:~ $ amixer -c0 Wrote: I tested on an Apple Air pad also, here the feedback is a little bit faster. The music isn't playing gapless when i rotate the volume controll faster. I think Frank79 and I have the same problem. Some steps on the volume rotation
switch to 0% volume, told me the mpc status, see attached picture..
Here is the output from the command:
Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [-0.50dB] [on]
Front Right: Playback 254 [100%] [-0.50dB] [on]
Simple mixer control 'PCM De-emphasis Filter',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM Filter Speed',0
Capabilities: enum
Items: 'Fast' 'Slow'
Item0: 'Fast'
Simple mixer control 'PCM High-pass Filter',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'PCM Nonoversample Emulate',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'PCM Phase Compensation',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Digital',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB] [on]
Front Right: Playback 255 [100%] [0.00dB] [on]
Simple mixer control 'HV_Enable',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [off]
Tim CurtisI have a Boss 2 but don't recall experiencing the issue you described. I can run some tests today.
When you mention "the sound stops sometimes, hanging." what does "hanging" mean? Do you have to reboot or power cycle the system?
it occurs again, open an SSH terminal and post the output from the commands below.
Code: mpc status
amixer -c0
I ran a few tests on my Boss 2 and no issues with volume.
One thing in your amixer output thats very strange is that the volume shows [100%] but [-50dB]. This makes no sense since at 100% volume it should be 0dB. This might be a symptom of whatever is causing the volume issue.
Code: Simple mixer control 'Master',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 254 [100%] [-0.50dB] [on]
Front Right: Playback 254 [100%] [-0.50dB] [on]
ETA: Disregard comment about -50db. As @ jonners pointed its actually -0.50 dB which is close enough to 0dB.
|