Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


5.3 Update - Still no Wifi
#11
(06-03-2019, 08:40 PM)Tim Curtis Wrote: Post the output from the commands I listed in my previous post (#8).

In addition I would like to see the output from the two cmds below.

Code:
cat /boot/config.txt
cat /boot/cmdline.txt

And indicate what model WiFi adapter you are using.
My moode player don't working on AP mode. Is a client from my router asus AC-68U, but i use non standard ssid with space. I was reproduce file: /etc/wpa_supplicant/wpa_supplicant.conf from working Moode 4.4.

My file:
 
country=PL
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev
update_config=1
network={
ssid="name With spaces"
scan_ssid=1
psk="passwordhere"
}
Reply
#12
(06-03-2019, 08:06 PM)Tim Curtis Wrote: Try checking the logs for errors

Code:
cat /var/log/syslog
dmesg
cat /var/log/mpd/log
moodeutl -l
See logs as requested.  Note I'm using the default wifi chip on the RPI.  This device is the Pi Zero.  I can also collect from a Pi 3b if you'd like.

Code:
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Linux version 4.19.46+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1230 Tue May 28 16:00:00 BST 2019
Jun  3 17:10:00 officeaudio kernel: [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
Jun  3 17:10:00 officeaudio kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jun  3 17:10:00 officeaudio kernel: [    0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Memory policy: Data cache writeback
Jun  3 17:10:00 officeaudio kernel: [    0.000000] cma: Reserved 8 MiB at 0x1b400000
Jun  3 17:10:00 officeaudio kernel: [    0.000000] On node 0 totalpages: 114688
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 1008 pages used for memmap
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 0 pages reserved
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 114688 pages, LIFO batch:31
Jun  3 17:10:00 officeaudio kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x49c with crng_init=0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jun  3 17:10:00 officeaudio kernel: [    0.000000] pcpu-alloc: [0] 0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:3B:C4:09 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Memory: 434484K/458752K available (6933K kernel code, 633K rwdata, 2068K rodata, 456K init, 797K bss, 16076K reserved, 8192K cma-reserved)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Virtual kernel memory layout:
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (6935 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   ( 456 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 634 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jun  3 17:10:00 officeaudio kernel: [    0.000000] ftrace: allocating 25050 entries in 74 pages
Jun  3 17:10:00 officeaudio kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jun  3 17:10:00 officeaudio kernel: [    0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
Jun  3 17:10:00 officeaudio kernel: [    0.000087] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
Jun  3 17:10:00 officeaudio kernel: [    0.000195] bcm2835: system timer (irq = 27)
Jun  3 17:10:00 officeaudio kernel: [    0.000791] Console: colour dummy device 80x30
Jun  3 17:10:00 officeaudio kernel: [    0.001443] console [tty1] enabled
Jun  3 17:10:00 officeaudio kernel: [    0.001530] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
Jun  3 17:10:00 officeaudio kernel: [    0.060371] pid_max: default: 32768 minimum: 301
Jun  3 17:10:00 officeaudio kernel: [    0.060941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.061002] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.062452] CPU: Testing write buffer coherency: ok
Jun  3 17:10:00 officeaudio kernel: [    0.063804] Setting up static identity map for 0x8200 - 0x8238
Jun  3 17:10:00 officeaudio kernel: [    0.065235] devtmpfs: initialized
Jun  3 17:10:00 officeaudio kernel: [    0.076497] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Jun  3 17:10:00 officeaudio kernel: [    0.076988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jun  3 17:10:00 officeaudio kernel: [    0.077067] futex hash table entries: 256 (order: -1, 3072 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.078466] pinctrl core: initialized pinctrl subsystem
Jun  3 17:10:00 officeaudio kernel: [    0.080061] NET: Registered protocol family 16
Jun  3 17:10:00 officeaudio kernel: [    0.083418] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Jun  3 17:10:00 officeaudio kernel: [    0.090847] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jun  3 17:10:00 officeaudio kernel: [    0.090920] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jun  3 17:10:00 officeaudio kernel: [    0.091094] Serial: AMBA PL011 UART driver
Jun  3 17:10:00 officeaudio kernel: [    0.094911] bcm2835-mbox 2000b880.mailbox: mailbox enabled
Jun  3 17:10:00 officeaudio kernel: [    0.138767] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
Jun  3 17:10:00 officeaudio kernel: [    0.141450] SCSI subsystem initialized
Jun  3 17:10:00 officeaudio kernel: [    0.141777] usbcore: registered new interface driver usbfs
Jun  3 17:10:00 officeaudio kernel: [    0.141939] usbcore: registered new interface driver hub
Jun  3 17:10:00 officeaudio kernel: [    0.142199] usbcore: registered new device driver usb
Jun  3 17:10:00 officeaudio kernel: [    0.160965] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-05-28 16:21, variant start
Jun  3 17:10:00 officeaudio kernel: [    0.170993] raspberrypi-firmware soc:firmware: Firmware hash is f37252430f9659d04032b6e0123d7950e3f9d92c
Jun  3 17:10:00 officeaudio kernel: [    0.183404] clocksource: Switched to clocksource timer
Jun  3 17:10:00 officeaudio kernel: [    0.286143] VFS: Disk quotas dquot_6.6.0
Jun  3 17:10:00 officeaudio kernel: [    0.286326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.286686] FS-Cache: Loaded
Jun  3 17:10:00 officeaudio kernel: [    0.287056] CacheFiles: Loaded
Jun  3 17:10:00 officeaudio kernel: [    0.305929] NET: Registered protocol family 2
Jun  3 17:10:00 officeaudio kernel: [    0.307308] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307432] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307546] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307666] TCP: Hash tables configured (established 4096 bind 4096)
Jun  3 17:10:00 officeaudio kernel: [    0.307860] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.308371] NET: Registered protocol family 1
Jun  3 17:10:00 officeaudio kernel: [    0.309498] RPC: Registered named UNIX socket transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309563] RPC: Registered udp transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309593] RPC: Registered tcp transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309621] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.311815] hw perfevents: no irqs for PMU, sampling events not supported
Jun  3 17:10:00 officeaudio kernel: [    0.311938] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
Jun  3 17:10:00 officeaudio kernel: [    0.316285] Initialise system trusted keyrings
Jun  3 17:10:00 officeaudio kernel: [    0.316753] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Jun  3 17:10:00 officeaudio kernel: [    0.331681] FS-Cache: Netfs 'nfs' registered for caching
Jun  3 17:10:00 officeaudio kernel: [    0.333047] NFS: Registering the id_resolver key type
Jun  3 17:10:00 officeaudio kernel: [    0.333150] Key type id_resolver registered
Jun  3 17:10:00 officeaudio kernel: [    0.333185] Key type id_legacy registered
Jun  3 17:10:00 officeaudio kernel: [    0.333237] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jun  3 17:10:00 officeaudio kernel: [    0.338971] Key type asymmetric registered
Jun  3 17:10:00 officeaudio kernel: [    0.339040] Asymmetric key parser 'x509' registered
Jun  3 17:10:00 officeaudio kernel: [    0.339174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Jun  3 17:10:00 officeaudio kernel: [    0.339683] io scheduler noop registered
Jun  3 17:10:00 officeaudio kernel: [    0.339740] io scheduler deadline registered (default)
Jun  3 17:10:00 officeaudio kernel: [    0.340357] io scheduler cfq registered
Jun  3 17:10:00 officeaudio kernel: [    0.340411] io scheduler mq-deadline registered (default)
Jun  3 17:10:00 officeaudio kernel: [    0.340448] io scheduler kyber registered
Jun  3 17:10:00 officeaudio kernel: [    0.343849] BCM2708FB: allocated DMA memory 0x5b500000
Jun  3 17:10:00 officeaudio kernel: [    0.343961] BCM2708FB: allocated DMA channel 0
Jun  3 17:10:00 officeaudio kernel: [    0.351975] Console: switching to colour frame buffer device 82x26
Jun  3 17:10:00 officeaudio kernel: [    0.361097] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jun  3 17:10:00 officeaudio kernel: [    0.366615] bcm2835-rng 20104000.rng: hwrng registered
Jun  3 17:10:00 officeaudio kernel: [    0.369634] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
Jun  3 17:10:00 officeaudio kernel: [    0.376106] vc-sm: Videocore shared memory driver
Jun  3 17:10:00 officeaudio kernel: [    0.379522] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
Jun  3 17:10:00 officeaudio kernel: [    0.405998] brd: module loaded
Jun  3 17:10:00 officeaudio kernel: [    0.422423] loop: module loaded
Jun  3 17:10:00 officeaudio kernel: [    0.425333] Loading iSCSI transport class v2.0-870.
Jun  3 17:10:00 officeaudio kernel: [    0.429045] usbcore: registered new interface driver smsc95xx
Jun  3 17:10:00 officeaudio kernel: [    0.431823] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jun  3 17:10:00 officeaudio kernel: [    0.462716] dwc_otg 20980000.usb: base=(ptrval)
Jun  3 17:10:00 officeaudio kernel: [    0.665846] Core Release: 2.80a
Jun  3 17:10:00 officeaudio kernel: [    0.668523] Setting default values for core params
Jun  3 17:10:00 officeaudio kernel: [    0.671205] Finished setting default values for core params
Jun  3 17:10:00 officeaudio kernel: [    0.874439] Using Buffer DMA mode
Jun  3 17:10:00 officeaudio kernel: [    0.877187] Periodic Transfer Interrupt Enhancement - disabled
Jun  3 17:10:00 officeaudio kernel: [    0.879902] Multiprocessor Interrupt Enhancement - disabled
Jun  3 17:10:00 officeaudio kernel: [    0.882723] OTG VER PARAM: 0, OTG VER FLAG: 0
Jun  3 17:10:00 officeaudio kernel: [    0.885630] Dedicated Tx FIFOs mode
Jun  3 17:10:00 officeaudio kernel: [    0.889244] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = db514000 dma = 0x5b514000 len=9024
Jun  3 17:10:00 officeaudio kernel: [    0.894924] FIQ FSM acceleration enabled for :
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Non-periodic Split Transactions
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Periodic Split Transactions
Jun  3 17:10:00 officeaudio kernel: [    0.894924] High-Speed Isochronous Endpoints
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Interrupt/Control Split Transaction hack enabled
Jun  3 17:10:00 officeaudio kernel: [    0.907769] dwc_otg: Microframe scheduler enabled
Jun  3 17:10:00 officeaudio kernel: [    0.908050] WARN::hcd_init_fiq:457: FIQ on core 0
Jun  3 17:10:00 officeaudio kernel: [    0.910700] WARN::hcd_init_fiq:458: FIQ ASM at c04f4be0 length 36
Jun  3 17:10:00 officeaudio kernel: [    0.913267] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
Jun  3 17:10:00 officeaudio kernel: [    0.915926] dwc_otg 20980000.usb: DWC OTG Controller
Jun  3 17:10:00 officeaudio kernel: [    0.918563] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
Jun  3 17:10:00 officeaudio kernel: [    0.921259] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
Jun  3 17:10:00 officeaudio kernel: [    0.923967] Init: Port Power? op_state=1
Jun  3 17:10:00 officeaudio kernel: [    0.926538] Init: Power Port (0)
Jun  3 17:10:00 officeaudio kernel: [    0.929415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Jun  3 17:10:00 officeaudio kernel: [    0.934616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  3 17:10:00 officeaudio kernel: [    0.937379] usb usb1: Product: DWC OTG Controller
Jun  3 17:10:00 officeaudio kernel: [    0.940064] usb usb1: Manufacturer: Linux 4.19.46+ dwc_otg_hcd
Jun  3 17:10:00 officeaudio kernel: [    0.942796] usb usb1: SerialNumber: 20980000.usb
Jun  3 17:10:00 officeaudio kernel: [    0.946566] hub 1-0:1.0: USB hub found
Jun  3 17:10:00 officeaudio kernel: [    0.949295] hub 1-0:1.0: 1 port detected
Jun  3 17:10:00 officeaudio kernel: [    0.952861] dwc_otg: FIQ enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952876] dwc_otg: NAK holdoff enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952884] dwc_otg: FIQ split-transaction FSM enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952903] Module dwc_common_port init
Jun  3 17:10:00 officeaudio kernel: [    0.953569] usbcore: registered new interface driver usb-storage
Jun  3 17:10:00 officeaudio kernel: [    0.956728] mousedev: PS/2 mouse device common for all mice
Jun  3 17:10:00 officeaudio kernel: [    0.960865] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
Jun  3 17:10:00 officeaudio kernel: [    0.964320] bcm2835-cpufreq: min=700000 max=1000000
Jun  3 17:10:00 officeaudio kernel: [    0.967857] sdhci: Secure Digital Host Controller Interface driver
Jun  3 17:10:00 officeaudio kernel: [    0.970684] sdhci: Copyright(c) Pierre Ossman
Jun  3 17:10:00 officeaudio kernel: [    0.974299] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
Jun  3 17:10:00 officeaudio kernel: [    0.977989] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
Jun  3 17:10:00 officeaudio kernel: [    0.981151] sdhci-pltfm: SDHCI platform and OF driver helper
Jun  3 17:10:00 officeaudio kernel: [    0.984877] ledtrig-cpu: registered to indicate activity on CPUs
Jun  3 17:10:00 officeaudio kernel: [    0.988028] hidraw: raw HID events driver (C) Jiri Kosina
Jun  3 17:10:00 officeaudio kernel: [    0.991231] usbcore: registered new interface driver usbhid
Jun  3 17:10:00 officeaudio kernel: [    0.994312] usbhid: USB HID core driver
Jun  3 17:10:00 officeaudio kernel: [    0.998270] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
Jun  3 17:10:00 officeaudio kernel: [    1.003568] [vc_sm_connected_init]: start
Jun  3 17:10:00 officeaudio kernel: [    1.014060] [vc_sm_connected_init]: end - returning 0
Jun  3 17:10:00 officeaudio kernel: [    1.018705] Initializing XFRM netlink socket
Jun  3 17:10:00 officeaudio kernel: [    1.021629] NET: Registered protocol family 17
Jun  3 17:10:00 officeaudio kernel: [    1.024647] Key type dns_resolver registered
Jun  3 17:10:00 officeaudio kernel: [    1.029268] registered taskstats version 1
Jun  3 17:10:00 officeaudio kernel: [    1.032133] Loading compiled-in X.509 certificates
Jun  3 17:10:00 officeaudio kernel: [    1.045421] uart-pl011 20201000.serial: cts_event_workaround enabled
Jun  3 17:10:00 officeaudio kernel: [    1.048469] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
Jun  3 17:10:00 officeaudio kernel: [    1.962658] console [ttyAMA0] enabled
Jun  3 17:10:00 officeaudio kernel: [    1.972061] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jun  3 17:10:00 officeaudio kernel: [    1.981120] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
Jun  3 17:10:00 officeaudio kernel: [    2.019478] sdhost: log_buf @ (ptrval) (5b513000)
Jun  3 17:10:00 officeaudio kernel: [    2.059217] random: fast init done
Jun  3 17:10:00 officeaudio kernel: [    2.070062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.078436] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jun  3 17:10:00 officeaudio kernel: [    2.088531] of_cfs_init
Jun  3 17:10:00 officeaudio kernel: [    2.114270] of_cfs_init: OK
Jun  3 17:10:00 officeaudio kernel: [    2.120470] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.129188] Waiting for root device PARTUUID=7ee80803-02...
Jun  3 17:10:00 officeaudio kernel: [    2.138897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.150247] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.216010] mmc0: host does not support reading read-only switch, assuming write-enable
Jun  3 17:10:00 officeaudio kernel: [    2.233458] mmc0: new high speed SDHC card at address aaaa
Jun  3 17:10:00 officeaudio kernel: [    2.244135] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
Jun  3 17:10:00 officeaudio kernel: [    2.254875]  mmcblk0: p1 p2
Jun  3 17:10:00 officeaudio kernel: [    2.289847] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Jun  3 17:10:00 officeaudio kernel: [    2.300056] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Jun  3 17:10:00 officeaudio kernel: [    2.321085] mmc1: new high speed SDIO card at address 0001
Jun  3 17:10:00 officeaudio kernel: [    2.677635] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
Jun  3 17:10:00 officeaudio kernel: [    2.704586] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
Jun  3 17:10:00 officeaudio kernel: [    2.712669] EXT4-fs (mmcblk0p2): recovery complete
Jun  3 17:10:00 officeaudio kernel: [    2.749564] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jun  3 17:10:00 officeaudio kernel: [    2.763106] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jun  3 17:10:00 officeaudio kernel: [    2.782843] devtmpfs: mounted
Jun  3 17:10:00 officeaudio kernel: [    2.793058] Freeing unused kernel memory: 456K
Jun  3 17:10:00 officeaudio kernel: [    2.800483] This architecture does not have kernel memory protection.
Jun  3 17:10:00 officeaudio kernel: [    2.809890] Run /sbin/init as init process
Jun  3 17:10:00 officeaudio kernel: [    3.527469] NET: Registered protocol family 10
Jun  3 17:10:00 officeaudio kernel: [    3.537223] Segment Routing with IPv6
Jun  3 17:10:00 officeaudio kernel: [    3.584076] random: systemd: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    3.734428] random: systemd: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    3.950866] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    4.051035] uart-pl011 20201000.serial: no DMA platform data
Jun  3 17:10:00 officeaudio kernel: [    7.766879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jun  3 17:10:00 officeaudio kernel: [   10.826879] media: Linux media interface: v0.10
Jun  3 17:10:00 officeaudio kernel: [   10.901096] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   10.903262] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jun  3 17:10:00 officeaudio kernel: [   10.903284] [vc_sm_connected_init]: start
Jun  3 17:10:00 officeaudio kernel: [   10.940720] [vc_sm_connected_init]: installed successfully
Jun  3 17:10:00 officeaudio kernel: [   10.971312] videodev: Linux video capture interface: v2.00
Jun  3 17:10:00 officeaudio kernel: [   11.096309] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.124719] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.181225] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.188104] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.234123] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jun  3 17:10:00 officeaudio kernel: [   11.234145] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jun  3 17:10:00 officeaudio kernel: [   11.265484] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jun  3 17:10:00 officeaudio kernel: [   11.265506] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jun  3 17:10:00 officeaudio kernel: [   11.283780] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jun  3 17:10:00 officeaudio kernel: [   11.283803] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jun  3 17:10:00 officeaudio kernel: [   11.745908] snd-rpi-simple soc:sound: pcm5102a-hifi <-> 20203000.i2s mapping ok
Jun  3 17:10:00 officeaudio kernel: [   12.377835] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jun  3 17:10:00 officeaudio kernel: [   12.538215] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun  3 17:10:00 officeaudio kernel: [   12.949995] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
Jun  3 17:10:00 officeaudio kernel: [   12.964687] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Jun  3 17:10:00 officeaudio kernel: [   12.965102] usbcore: registered new interface driver brcmfmac
Jun  3 17:10:00 officeaudio kernel: [   13.189186] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Jun  3 17:10:00 officeaudio kernel: [   13.189368] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jun  3 17:10:00 officeaudio kernel: [   13.190500] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
Jun  3 17:10:00 officeaudio systemd[1]: Starting WPA supplicant...
Jun  3 17:10:01 officeaudio systemd[1]: Starting LSB: Switch to ondemand cpu governor (unless shift key is pressed)...
Jun  3 17:10:01 officeaudio systemd[1]: apt-daily-upgrade.timer: Adding 26min 18.609695s random time.
Jun  3 17:10:01 officeaudio systemd[1]: Started Daily apt upgrade and clean activities.
Jun  3 17:10:01 officeaudio systemd[1]: Reached target Timers.
Jun  3 17:10:01 officeaudio systemd[1]: Starting Save/Restore Sound Card State...
Jun  3 17:10:01 officeaudio systemd[1]: Starting Login Service...
Jun  3 17:10:01 officeaudio systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Jun  3 17:10:01 officeaudio systemd[1]: Starting dhcpcd on all interfaces...
Jun  3 17:10:01 officeaudio wpa_supplicant[247]: Successfully initialized wpa_supplicant
Jun  3 17:10:01 officeaudio systemd[1]: Starting Disable WiFi if country not set...
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Found user 'avahi' (UID 108) and group 'avahi' (GID 112).
Jun  3 17:10:01 officeaudio systemd[1]: Started System Logging Service.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully dropped root privileges.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: avahi-daemon 0.6.32 starting up.
Jun  3 17:10:01 officeaudio systemd[1]: Started Save/Restore Sound Card State.
Jun  3 17:10:01 officeaudio dhcpcd[256]: dev: loaded udev
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully called chroot().
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully dropped remaining capabilities.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Loading service file /services/moode.service.
Jun  3 17:10:01 officeaudio systemd[1]: Started Disable WiFi if country not set.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Loading service file /services/udisks.service.
Jun  3 17:10:01 officeaudio dhcpcd[256]: no valid interfaces found
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Network interface enumeration completed.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Server startup complete. Host name is officeaudio.local. Local service cookie is 754431248.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Service "officeaudio" (/services/udisks.service) successfully established.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Service "moOde audio player: officeaudio" (/services/moode.service) successfully established.
Jun  3 17:10:02 officeaudio raspi-config[248]: Checking if shift key is held down: No. Switching to ondemand scaling governor.
Jun  3 17:10:02 officeaudio systemd[1]: Started LSB: Start/stop sysstat's sadc.
Jun  3 17:10:02 officeaudio systemd[1]: Started LSB: Switch to ondemand cpu governor (unless shift key is pressed).
Jun  3 17:10:02 officeaudio systemd[1]: Started WPA supplicant.
Jun  3 17:10:02 officeaudio systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Jun  3 17:10:02 officeaudio systemd[1]: Started Login Service.
Jun  3 17:10:02 officeaudio systemd[1]: Started Raise network interfaces.
Jun  3 17:10:03 officeaudio systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Jun  3 17:10:03 officeaudio systemd[1]: Starting Load/Save RF Kill Switch Status...
Jun  3 17:10:03 officeaudio systemd[1]: Reached target Sound Card.
Jun  3 17:10:03 officeaudio systemd[1]: Started Load/Save RF Kill Switch Status.
Jun  3 17:10:03 officeaudio dhcpcd[256]: wlan0: starting wpa_supplicant
Jun  3 17:10:03 officeaudio dhcpcd-run-hooks[305]: wlan0: starting wpa_supplicant
Jun  3 17:10:03 officeaudio kernel: [   20.044838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun  3 17:10:03 officeaudio kernel: [   20.044883] brcmfmac: power management disabled
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: waiting for carrier
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: carrier acquired
Jun  3 17:10:04 officeaudio dhcpcd[256]: DUID 00:01:00:01:24:65:ab:83:b8:27:eb:b9:13:e7
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: IAID eb:6e:91:5c
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: adding address fe80::ed9d:8793:fd89:4f81
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::ed9d:8793:fd89:4f81.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv6 for mDNS.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Registering new address record for fe80::ed9d:8793:fd89:4f81 on wlan0.*.
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: probing address 192.168.1.92/24
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: carrier lost
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: deleting address fe80::ed9d:8793:fd89:4f81
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Withdrawing address record for fe80::ed9d:8793:fd89:4f81 on wlan0.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::ed9d:8793:fd89:4f81.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Interface wlan0.IPv6 no longer relevant for mDNS.
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: carrier acquired
Jun  3 17:10:05 officeaudio kernel: [   21.429017] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: IAID eb:6e:91:5c
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: adding address fe80::40c7:c52b:86cb:8443
Jun  3 17:10:05 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::40c7:c52b:86cb:8443.
Jun  3 17:10:05 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv6 for mDNS.
Jun  3 17:10:05 officeaudio avahi-daemon[254]: Registering new address record for fe80::40c7:c52b:86cb:8443 on wlan0.*.
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: probing address 192.168.1.92/24
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: soliciting an IPv6 router
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: using static address 192.168.1.92/24
Jun  3 17:10:10 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.92.
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: adding route to 192.168.1.0/24
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: adding default route via 192.168.1.1
Jun  3 17:10:10 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv4 for mDNS.
Jun  3 17:10:10 officeaudio avahi-daemon[254]: Registering new address record for 192.168.1.92 on wlan0.IPv4.
Jun  3 17:10:10 officeaudio dhcpcd[256]: forked to background, child pid 376
Jun  3 17:10:10 officeaudio systemd[1]: Started dhcpcd on all interfaces.
Jun  3 17:10:10 officeaudio systemd[1]: Reached target Network.
Jun  3 17:10:10 officeaudio systemd[1]: Starting OpenBSD Secure Shell server...
Jun  3 17:10:10 officeaudio systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Jun  3 17:10:10 officeaudio systemd[1]: Starting A high performance web server and a reverse proxy server...
Jun  3 17:10:10 officeaudio systemd[1]: Reached target Network is Online.
Jun  3 17:10:10 officeaudio systemd[1]: Starting Samba NMB Daemon...
Jun  3 17:10:10 officeaudio systemd[1]: Started memcached daemon.
Jun  3 17:10:10 officeaudio systemd[1]: Starting Permit User Sessions...
Jun  3 17:10:10 officeaudio systemd[1]: Starting /etc/rc.local Compatibility...
Jun  3 17:10:11 officeaudio systemd[1]: Started Permit User Sessions.
Jun  3 17:10:11 officeaudio dbus[240]: [system] Activating via systemd: service name='org.freedesktop.UDisks' unit='udisks.service'
Jun  3 17:10:11 officeaudio systemd[1]: Starting Disk Manager (legacy version)...
Jun  3 17:10:12 officeaudio dbus[240]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun  3 17:10:12 officeaudio systemd[1]: Started Disk Manager (legacy version).
Jun  3 17:10:12 officeaudio systemd[1]: Started OpenBSD Secure Shell server.
Jun  3 17:10:12 officeaudio dbus[240]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Jun  3 17:10:12 officeaudio systemd[1]: Starting Authorization Manager...
Jun  3 17:10:13 officeaudio polkitd[404]: started daemon version 0.105 using authority implementation `local' version `0.105'
Jun  3 17:10:13 officeaudio dbus[240]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jun  3 17:10:13 officeaudio systemd[1]: Started Authorization Manager.
Jun  3 17:10:13 officeaudio systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
Jun  3 17:10:14 officeaudio systemd[1]: Started A high performance web server and a reverse proxy server.
Jun  3 17:10:14 officeaudio systemd[1]: nmbd.service: Supervising process 422 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:14 officeaudio systemd[1]: Started Samba NMB Daemon.
Jun  3 17:10:14 officeaudio nmbd[422]: [2019/06/03 17:10:14.680755,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:14 officeaudio nmbd[422]:   STATUS=daemon 'nmbd' finished starting up and ready to serve connections
Jun  3 17:10:14 officeaudio systemd[1]: Starting Samba Winbind Daemon...
Jun  3 17:10:14 officeaudio systemd[1]: Started /etc/rc.local Compatibility.
Jun  3 17:10:14 officeaudio systemd[1]: Starting Hold until boot process finishes up...
Jun  3 17:10:14 officeaudio systemd[1]: Starting Terminate Plymouth Boot Screen...
Jun  3 17:10:15 officeaudio systemd[1]: Received SIGRTMIN+21 from PID 128 (plymouthd).
Jun  3 17:10:15 officeaudio systemd[1]: Started Terminate Plymouth Boot Screen.
Jun  3 17:10:15 officeaudio systemd[1]: Started Hold until boot process finishes up.
Jun  3 17:10:15 officeaudio systemd[1]: Started Serial Getty on ttyAMA0.
Jun  3 17:10:15 officeaudio systemd[1]: Started Getty on tty1.
Jun  3 17:10:15 officeaudio systemd[1]: Reached target Login Prompts.
Jun  3 17:10:16 officeaudio systemd[1]: winbind.service: Supervising process 476 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:16 officeaudio winbindd[476]: [2019/06/03 17:10:16.941041,  0] ../source3/winbindd/winbindd_cache.c:3244(initialize_winbindd_cache)
Jun  3 17:10:16 officeaudio winbindd[476]:   initialize_winbindd_cache: clearing cache and re-creating with version number 2
Jun  3 17:10:17 officeaudio systemd[1]: Started Samba Winbind Daemon.
Jun  3 17:10:17 officeaudio winbindd[476]: [2019/06/03 17:10:17.839448,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:17 officeaudio winbindd[476]:   STATUS=daemon 'winbindd' finished starting up and ready to serve connections
Jun  3 17:10:17 officeaudio systemd[1]: Starting Samba SMB Daemon...
Jun  3 17:10:19 officeaudio dhcpcd[376]: wlan0: no IPv6 Routers available
Jun  3 17:10:20 officeaudio systemd[1]: smbd.service: Supervising process 486 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:20 officeaudio systemd[1]: Started Samba SMB Daemon.
Jun  3 17:10:20 officeaudio systemd[1]: Reached target Multi-User System.
Jun  3 17:10:20 officeaudio systemd[1]: Starting Update UTMP about System Runlevel Changes...
Jun  3 17:10:20 officeaudio smbd[486]: [2019/06/03 17:10:20.660820,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:20 officeaudio smbd[486]:   STATUS=daemon 'smbd' finished starting up and ready to serve connections
Jun  3 17:10:20 officeaudio systemd[1]: Started Update UTMP about System Runlevel Changes.
Jun  3 17:10:20 officeaudio systemd[1]: Startup finished in 3.296s (kernel) + 33.699s (userspace) = 36.996s.
Jun  3 17:10:24 officeaudio systemd[1]: [/lib/systemd/system/mpd.service:32] CPU scheduling priority is out of range, ignoring: 43
Jun  3 17:10:24 officeaudio systemd[1]: Started Music Player Daemon.
Jun  3 17:10:26 officeaudio systemd[1]: Started UPnP Renderer front-end to MPD.
Jun  3 17:10:26 officeaudio shairport-sync: Invalid disable_standby_mode option choice "uto". It should be "always", "auto" or "never". It is set to "never".
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for gmusic because gmusicuser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for qobuz because qobuzuser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for tidal because tidaluser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for uprcl because uprcluser is not defined in configuration
Jun  3 17:10:27 officeaudio systemd[1]: Started BluezAlsa proxy.
Jun  3 17:10:27 officeaudio shairport-sync: Note: this device may be too slow for "soxr" interpolation. Consider choosing the "basic" or "auto" interpolation setting.
Jun  3 17:10:27 officeaudio dbus[240]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Jun  3 17:10:27 officeaudio dbus[240]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service not found.
Jun  3 17:10:27 officeaudio bluealsa[848]: /usr/bin/bluealsa: Couldn't get managed objects: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.
Jun  3 17:16:38 officeaudio systemd[1]: Time has been changed
Jun  3 17:16:38 officeaudio systemd[1]: apt-daily.timer: Adding 2h 58min 58.321314s random time.
Jun  3 17:16:38 officeaudio systemd[1]: apt-daily-upgrade.timer: Adding 28min 33.936560s random time.
Jun  3 17:16:38 officeaudio systemd-timesyncd[214]: Synchronized to time server 216.229.4.66:123 (2.debian.pool.ntp.org).
Jun  3 17:17:23 officeaudio systemd[1]: Created slice User Slice of pi.
Jun  3 17:17:23 officeaudio systemd[1]: Starting User Manager for UID 1000...
Jun  3 17:17:23 officeaudio systemd[1]: Started Session c1 of user pi.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Timers.
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Paths.
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent (access for web browsers).
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Sockets.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Basic System.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Default.
Jun  3 17:17:23 officeaudio systemd[886]: Startup finished in 155ms.
Jun  3 17:17:23 officeaudio systemd[1]: Started User Manager for UID 1000.
Jun  3 17:18:54 officeaudio kernel: [  182.861425] random: crng init done
Jun  3 17:18:54 officeaudio kernel: [  182.861443] random: 7 urandom warning(s) missed due to ratelimiting

Code:
pi@officeaudio:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.46+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1230 Tue May 28 16:00:00 BST 2019
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[    0.000000] Memory policy: Data cache writeback
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] On node 0 totalpages: 114688
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x49c with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:3B:C4:09 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 434484K/458752K available (6933K kernel code, 633K rwdata, 2068K rodata, 456K init, 797K bss, 16076K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                  vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                  fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                  vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
                  lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
                  modules : 0xbf000000 - 0xc0000000   (  16 MB)
                    .text : 0x(ptrval) - 0x(ptrval)   (6935 kB)
                    .init : 0x(ptrval) - 0x(ptrval)   ( 456 kB)
                    .data : 0x(ptrval) - 0x(ptrval)   ( 634 kB)
                     .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 25050 entries in 74 pages
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000087] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000195] bcm2835: system timer (irq = 27)
[    0.000791] Console: colour dummy device 80x30
[    0.001443] console [tty1] enabled
[    0.001530] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060371] pid_max: default: 32768 minimum: 301
[    0.060941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.061002] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062452] CPU: Testing write buffer coherency: ok
[    0.063804] Setting up static identity map for 0x8200 - 0x8238
[    0.065235] devtmpfs: initialized
[    0.076497] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.076988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.077067] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.078466] pinctrl core: initialized pinctrl subsystem
[    0.080061] NET: Registered protocol family 16
[    0.083418] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.090847] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.090920] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.091094] Serial: AMBA PL011 UART driver
[    0.094911] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[    0.138767] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.141450] SCSI subsystem initialized
[    0.141777] usbcore: registered new interface driver usbfs
[    0.141939] usbcore: registered new interface driver hub
[    0.142199] usbcore: registered new device driver usb
[    0.160965] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-05-28 16:21, variant start
[    0.170993] raspberrypi-firmware soc:firmware: Firmware hash is f37252430f9659d04032b6e0123d7950e3f9d92c
[    0.183404] clocksource: Switched to clocksource timer
[    0.286143] VFS: Disk quotas dquot_6.6.0
[    0.286326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.286686] FS-Cache: Loaded
[    0.287056] CacheFiles: Loaded
[    0.305929] NET: Registered protocol family 2
[    0.307308] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.307432] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.307546] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.307666] TCP: Hash tables configured (established 4096 bind 4096)
[    0.307860] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.307927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.308371] NET: Registered protocol family 1
[    0.309498] RPC: Registered named UNIX socket transport module.
[    0.309563] RPC: Registered udp transport module.
[    0.309593] RPC: Registered tcp transport module.
[    0.309621] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.311815] hw perfevents: no irqs for PMU, sampling events not supported
[    0.311938] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[    0.316285] Initialise system trusted keyrings
[    0.316753] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.331681] FS-Cache: Netfs 'nfs' registered for caching
[    0.333047] NFS: Registering the id_resolver key type
[    0.333150] Key type id_resolver registered
[    0.333185] Key type id_legacy registered
[    0.333237] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.338971] Key type asymmetric registered
[    0.339040] Asymmetric key parser 'x509' registered
[    0.339174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.339683] io scheduler noop registered
[    0.339740] io scheduler deadline registered (default)
[    0.340357] io scheduler cfq registered
[    0.340411] io scheduler mq-deadline registered (default)
[    0.340448] io scheduler kyber registered
[    0.343849] BCM2708FB: allocated DMA memory 0x5b500000
[    0.343961] BCM2708FB: allocated DMA channel 0
[    0.351975] Console: switching to colour frame buffer device 82x26
[    0.361097] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.366615] bcm2835-rng 20104000.rng: hwrng registered
[    0.369634] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.376106] vc-sm: Videocore shared memory driver
[    0.379522] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[    0.405998] brd: module loaded
[    0.422423] loop: module loaded
[    0.425333] Loading iSCSI transport class v2.0-870.
[    0.429045] usbcore: registered new interface driver smsc95xx
[    0.431823] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.462716] dwc_otg 20980000.usb: base=(ptrval)
[    0.665846] Core Release: 2.80a
[    0.668523] Setting default values for core params
[    0.671205] Finished setting default values for core params
[    0.874439] Using Buffer DMA mode
[    0.877187] Periodic Transfer Interrupt Enhancement - disabled
[    0.879902] Multiprocessor Interrupt Enhancement - disabled
[    0.882723] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.885630] Dedicated Tx FIFOs mode
[    0.889244] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = db514000 dma = 0x5b514000 len=9024
[    0.894924] FIQ FSM acceleration enabled for :
              Non-periodic Split Transactions
              Periodic Split Transactions
              High-Speed Isochronous Endpoints
              Interrupt/Control Split Transaction hack enabled
[    0.907769] dwc_otg: Microframe scheduler enabled
[    0.908050] WARN::hcd_init_fiq:457: FIQ on core 0
[    0.910700] WARN::hcd_init_fiq:458: FIQ ASM at c04f4be0 length 36
[    0.913267] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[    0.915926] dwc_otg 20980000.usb: DWC OTG Controller
[    0.918563] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[    0.921259] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[    0.923967] Init: Port Power? op_state=1
[    0.926538] Init: Power Port (0)
[    0.929415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.934616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.937379] usb usb1: Product: DWC OTG Controller
[    0.940064] usb usb1: Manufacturer: Linux 4.19.46+ dwc_otg_hcd
[    0.942796] usb usb1: SerialNumber: 20980000.usb
[    0.946566] hub 1-0:1.0: USB hub found
[    0.949295] hub 1-0:1.0: 1 port detected
[    0.952861] dwc_otg: FIQ enabled
[    0.952876] dwc_otg: NAK holdoff enabled
[    0.952884] dwc_otg: FIQ split-transaction FSM enabled
[    0.952903] Module dwc_common_port init
[    0.953569] usbcore: registered new interface driver usb-storage
[    0.956728] mousedev: PS/2 mouse device common for all mice
[    0.960865] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.964320] bcm2835-cpufreq: min=700000 max=1000000
[    0.967857] sdhci: Secure Digital Host Controller Interface driver
[    0.970684] sdhci: Copyright(c) Pierre Ossman
[    0.974299] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[    0.977989] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[    0.981151] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.984877] ledtrig-cpu: registered to indicate activity on CPUs
[    0.988028] hidraw: raw HID events driver (C) Jiri Kosina
[    0.991231] usbcore: registered new interface driver usbhid
[    0.994312] usbhid: USB HID core driver
[    0.998270] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    1.003568] [vc_sm_connected_init]: start
[    1.014060] [vc_sm_connected_init]: end - returning 0
[    1.018705] Initializing XFRM netlink socket
[    1.021629] NET: Registered protocol family 17
[    1.024647] Key type dns_resolver registered
[    1.029268] registered taskstats version 1
[    1.032133] Loading compiled-in X.509 certificates
[    1.045421] uart-pl011 20201000.serial: cts_event_workaround enabled
[    1.048469] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    1.962658] console [ttyAMA0] enabled
[    1.972061] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.981120] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[    2.019478] sdhost: log_buf @ (ptrval) (5b513000)
[    2.059217] random: fast init done
[    2.070062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.078436] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.088531] of_cfs_init
[    2.114270] of_cfs_init: OK
[    2.120470] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.129188] Waiting for root device PARTUUID=7ee80803-02...
[    2.138897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.150247] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.216010] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.233458] mmc0: new high speed SDHC card at address aaaa
[    2.244135] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[    2.254875]  mmcblk0: p1 p2
[    2.289847] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    2.300056] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    2.321085] mmc1: new high speed SDIO card at address 0001
[    2.677635] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    2.704586] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
[    2.712669] EXT4-fs (mmcblk0p2): recovery complete
[    2.749564] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.763106] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.782843] devtmpfs: mounted
[    2.793058] Freeing unused kernel memory: 456K
[    2.800483] This architecture does not have kernel memory protection.
[    2.809890] Run /sbin/init as init process
[    3.351636] systemd[1]: System time before build time, advancing clock.
[    3.527469] NET: Registered protocol family 10
[    3.537223] Segment Routing with IPv6
[    3.584076] random: systemd: uninitialized urandom read (16 bytes read)
[    3.604470] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.632844] systemd[1]: Detected architecture arm.
[    3.662662] systemd[1]: Set hostname to <officeaudio>.
[    3.734428] random: systemd: uninitialized urandom read (16 bytes read)
[    3.950866] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    4.051035] uart-pl011 20201000.serial: no DMA platform data
[    4.967766] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.011002] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.032161] systemd[1]: Listening on Syslog Socket.
[    5.045500] systemd[1]: Listening on udev Kernel Socket.
[    5.060296] systemd[1]: Created slice User and Session Slice.
[    5.074816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.094200] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.766879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    8.436489] systemd-journald[64]: Received request to flush runtime journal from PID 1
[   10.826879] media: Linux media interface: v0.10
[   10.901096] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   10.903262] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   10.903284] [vc_sm_connected_init]: start
[   10.940720] [vc_sm_connected_init]: installed successfully
[   10.971312] videodev: Linux video capture interface: v2.00
[   11.096309] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   11.124719] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   11.181225] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   11.188104] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   11.234123] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   11.234145] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   11.265484] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   11.265506] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   11.283780] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   11.283803] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   11.745908] snd-rpi-simple soc:sound: pcm5102a-hifi <-> 20203000.i2s mapping ok
[   12.377835] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.538215] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.949995] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[   12.964687] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   12.965102] usbcore: registered new interface driver brcmfmac
[   13.189186] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   13.189368] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   13.190500] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[   20.044838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.044883] brcmfmac: power management disabled
[   21.429017] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  182.861425] random: crng init done
[  182.861443] random: 7 urandom warning(s) missed due to ratelimiting

Code:
pi@officeaudio:~ $ cat /var/log/mpd/log
Jun 03 10:02 : exception: Integer expected: undefined
Jun 03 12:34 : player: Decoder is too slow; playing silence to avoid xrun
Jun 03 14:37 : player: played "http://stream-tx3.radioparadise.com/aac-320"

Code:
pi@officeaudio:~ $ moodeutl -l
20190603 171014 worker: - Start
20190603 171014 worker: Successfully daemonized
20190603 171014 worker: Integrity check (passed)
20190603 171015 worker: ALSA volume (None)
20190603 171016 worker: Session loaded
20190603 171016 worker: Debug logging (off)
20190603 171016 worker: - Platform
20190603 171020 worker: Rel  (Moode 5.3 2019-05-30)
20190603 171020 worker: Upd  (None)
20190603 171020 worker: Rasp (9.9)
20190603 171020 worker: Kern (4.19.46+)
20190603 171020 worker: MPD  (0.20.23)
20190603 171020 worker: Host (officeaudio)
20190603 171020 worker: Hdwr (Pi-Zero W 512MB v1.1)
20190603 171020 worker: Arch (armv6l)
20190603 171020 worker: Gov  (performance)
20190603 171021 worker: USB boot not enabled yet
20190603 171021 worker: File system expanded
20190603 171021 worker: HDMI port off
20190603 171022 worker: File check ok
20190603 171022 worker: - Network
20190603 171022 worker: eth0 does not exist
20190603 171022 worker: eth0 address not assigned
20190603 171022 worker: wlan0 exists
20190603 171022 worker: wifi country (US)
20190603 171022 worker: wlan0 trying SSID (ufomb2)
20190603 171022 worker: wlan0 (192.168.1.92)
20190603 171022 worker: - Audio
20190603 171023 worker: ALSA outputs unmuted
20190603 171023 worker: ALSA card number (0)
20190603 171023 worker: Audio output (I2S audio device)
20190603 171023 worker: Audio device (HiFiBerry DAC+ Light)
20190603 171023 worker: ALSA mixer name (Digital)
20190603 171023 worker: MPD volume control (software)
20190603 171023 worker: Hdwr volume controller not detected
20190603 171023 worker: - Services
20190603 171023 worker: Reset renderer active state
20190603 171024 worker: MPD conf updated
20190603 171024 worker: MPD started
20190603 171025 worker: MPD accepting connections
20190603 171025 worker: Configure MPD outputs
20190603 171025 worker: MPD output 1 ALSA default (on)
20190603 171025 worker: MPD output 2 ALSA crossfeed (off)
20190603 171025 worker: MPD output 3 ALSA parametric eq (off)
20190603 171025 worker: MPD output 4 ALSA graphic eq (off)
20190603 171025 worker: MPD output 5 ALSA polarity inversion (off)
20190603 171025 worker: MPD output 6 ALSA bluetooth (off)
20190603 171025 worker: MPD output 7 HTTP stream (off)
20190603 171025 worker: MPD crossfade (off)
20190603 171025 worker: Audio source (Local)
20190603 171025 worker: Output device (Local)
20190603 171025 worker: Airplay receiver started
20190603 171026 worker: UPnP renderer started
20190603 171026 worker: Bluetooth controller started

Code:
pi@officeaudio:~ $ cat /boot/config.txt
disable_splash=1
hdmi_drive=2
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=hifiberry-dac
#dtoverlay=pi3-disable-wifi
dtoverlay=pi3-disable-bt

Code:
pi@officeaudio:~ $ cat /boot/cmdline.txt
net.ifnames=0 dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

As a courtesy I placed the lengthy log output in Code boxes for readability. The Code box button is on the right side of the Toolbar when composing a post.

Please use it when posting log output or commands.
Reply
#13
(06-03-2019, 09:32 PM)dmueller Wrote:
(06-03-2019, 08:06 PM)Tim Curtis Wrote: Try checking the logs for errors

Code:
cat /var/log/syslog
dmesg
cat /var/log/mpd/log
moodeutl -l
See logs as requested.  Note I'm using the default wifi chip on the RPI.  This device is the Pi Zero.  I can also collect from a Pi 3b if you'd like.

Code:
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Booting Linux on physical CPU 0x0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Linux version 4.19.46+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1230 Tue May 28 16:00:00 BST 2019
Jun  3 17:10:00 officeaudio kernel: [    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
Jun  3 17:10:00 officeaudio kernel: [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
Jun  3 17:10:00 officeaudio kernel: [    0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Memory policy: Data cache writeback
Jun  3 17:10:00 officeaudio kernel: [    0.000000] cma: Reserved 8 MiB at 0x1b400000
Jun  3 17:10:00 officeaudio kernel: [    0.000000] On node 0 totalpages: 114688
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 1008 pages used for memmap
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 0 pages reserved
Jun  3 17:10:00 officeaudio kernel: [    0.000000]   Normal zone: 114688 pages, LIFO batch:31
Jun  3 17:10:00 officeaudio kernel: [    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x49c with crng_init=0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
Jun  3 17:10:00 officeaudio kernel: [    0.000000] pcpu-alloc: [0] 0
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:3B:C4:09 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Memory: 434484K/458752K available (6933K kernel code, 633K rwdata, 2068K rodata, 456K init, 797K bss, 16076K reserved, 8192K cma-reserved)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] Virtual kernel memory layout:
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]     modules : 0xbf000000 - 0xc0000000   (  16 MB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .text : 0x(ptrval) - 0x(ptrval)   (6935 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .init : 0x(ptrval) - 0x(ptrval)   ( 456 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]       .data : 0x(ptrval) - 0x(ptrval)   ( 634 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000]        .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
Jun  3 17:10:00 officeaudio kernel: [    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
Jun  3 17:10:00 officeaudio kernel: [    0.000000] ftrace: allocating 25050 entries in 74 pages
Jun  3 17:10:00 officeaudio kernel: [    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
Jun  3 17:10:00 officeaudio kernel: [    0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
Jun  3 17:10:00 officeaudio kernel: [    0.000087] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
Jun  3 17:10:00 officeaudio kernel: [    0.000195] bcm2835: system timer (irq = 27)
Jun  3 17:10:00 officeaudio kernel: [    0.000791] Console: colour dummy device 80x30
Jun  3 17:10:00 officeaudio kernel: [    0.001443] console [tty1] enabled
Jun  3 17:10:00 officeaudio kernel: [    0.001530] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
Jun  3 17:10:00 officeaudio kernel: [    0.060371] pid_max: default: 32768 minimum: 301
Jun  3 17:10:00 officeaudio kernel: [    0.060941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.061002] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.062452] CPU: Testing write buffer coherency: ok
Jun  3 17:10:00 officeaudio kernel: [    0.063804] Setting up static identity map for 0x8200 - 0x8238
Jun  3 17:10:00 officeaudio kernel: [    0.065235] devtmpfs: initialized
Jun  3 17:10:00 officeaudio kernel: [    0.076497] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
Jun  3 17:10:00 officeaudio kernel: [    0.076988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
Jun  3 17:10:00 officeaudio kernel: [    0.077067] futex hash table entries: 256 (order: -1, 3072 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.078466] pinctrl core: initialized pinctrl subsystem
Jun  3 17:10:00 officeaudio kernel: [    0.080061] NET: Registered protocol family 16
Jun  3 17:10:00 officeaudio kernel: [    0.083418] DMA: preallocated 1024 KiB pool for atomic coherent allocations
Jun  3 17:10:00 officeaudio kernel: [    0.090847] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
Jun  3 17:10:00 officeaudio kernel: [    0.090920] hw-breakpoint: maximum watchpoint size is 4 bytes.
Jun  3 17:10:00 officeaudio kernel: [    0.091094] Serial: AMBA PL011 UART driver
Jun  3 17:10:00 officeaudio kernel: [    0.094911] bcm2835-mbox 2000b880.mailbox: mailbox enabled
Jun  3 17:10:00 officeaudio kernel: [    0.138767] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
Jun  3 17:10:00 officeaudio kernel: [    0.141450] SCSI subsystem initialized
Jun  3 17:10:00 officeaudio kernel: [    0.141777] usbcore: registered new interface driver usbfs
Jun  3 17:10:00 officeaudio kernel: [    0.141939] usbcore: registered new interface driver hub
Jun  3 17:10:00 officeaudio kernel: [    0.142199] usbcore: registered new device driver usb
Jun  3 17:10:00 officeaudio kernel: [    0.160965] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-05-28 16:21, variant start
Jun  3 17:10:00 officeaudio kernel: [    0.170993] raspberrypi-firmware soc:firmware: Firmware hash is f37252430f9659d04032b6e0123d7950e3f9d92c
Jun  3 17:10:00 officeaudio kernel: [    0.183404] clocksource: Switched to clocksource timer
Jun  3 17:10:00 officeaudio kernel: [    0.286143] VFS: Disk quotas dquot_6.6.0
Jun  3 17:10:00 officeaudio kernel: [    0.286326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.286686] FS-Cache: Loaded
Jun  3 17:10:00 officeaudio kernel: [    0.287056] CacheFiles: Loaded
Jun  3 17:10:00 officeaudio kernel: [    0.305929] NET: Registered protocol family 2
Jun  3 17:10:00 officeaudio kernel: [    0.307308] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307432] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307546] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307666] TCP: Hash tables configured (established 4096 bind 4096)
Jun  3 17:10:00 officeaudio kernel: [    0.307860] UDP hash table entries: 256 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.307927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
Jun  3 17:10:00 officeaudio kernel: [    0.308371] NET: Registered protocol family 1
Jun  3 17:10:00 officeaudio kernel: [    0.309498] RPC: Registered named UNIX socket transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309563] RPC: Registered udp transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309593] RPC: Registered tcp transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.309621] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jun  3 17:10:00 officeaudio kernel: [    0.311815] hw perfevents: no irqs for PMU, sampling events not supported
Jun  3 17:10:00 officeaudio kernel: [    0.311938] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
Jun  3 17:10:00 officeaudio kernel: [    0.316285] Initialise system trusted keyrings
Jun  3 17:10:00 officeaudio kernel: [    0.316753] workingset: timestamp_bits=14 max_order=17 bucket_order=3
Jun  3 17:10:00 officeaudio kernel: [    0.331681] FS-Cache: Netfs 'nfs' registered for caching
Jun  3 17:10:00 officeaudio kernel: [    0.333047] NFS: Registering the id_resolver key type
Jun  3 17:10:00 officeaudio kernel: [    0.333150] Key type id_resolver registered
Jun  3 17:10:00 officeaudio kernel: [    0.333185] Key type id_legacy registered
Jun  3 17:10:00 officeaudio kernel: [    0.333237] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Jun  3 17:10:00 officeaudio kernel: [    0.338971] Key type asymmetric registered
Jun  3 17:10:00 officeaudio kernel: [    0.339040] Asymmetric key parser 'x509' registered
Jun  3 17:10:00 officeaudio kernel: [    0.339174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
Jun  3 17:10:00 officeaudio kernel: [    0.339683] io scheduler noop registered
Jun  3 17:10:00 officeaudio kernel: [    0.339740] io scheduler deadline registered (default)
Jun  3 17:10:00 officeaudio kernel: [    0.340357] io scheduler cfq registered
Jun  3 17:10:00 officeaudio kernel: [    0.340411] io scheduler mq-deadline registered (default)
Jun  3 17:10:00 officeaudio kernel: [    0.340448] io scheduler kyber registered
Jun  3 17:10:00 officeaudio kernel: [    0.343849] BCM2708FB: allocated DMA memory 0x5b500000
Jun  3 17:10:00 officeaudio kernel: [    0.343961] BCM2708FB: allocated DMA channel 0
Jun  3 17:10:00 officeaudio kernel: [    0.351975] Console: switching to colour frame buffer device 82x26
Jun  3 17:10:00 officeaudio kernel: [    0.361097] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
Jun  3 17:10:00 officeaudio kernel: [    0.366615] bcm2835-rng 20104000.rng: hwrng registered
Jun  3 17:10:00 officeaudio kernel: [    0.369634] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
Jun  3 17:10:00 officeaudio kernel: [    0.376106] vc-sm: Videocore shared memory driver
Jun  3 17:10:00 officeaudio kernel: [    0.379522] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
Jun  3 17:10:00 officeaudio kernel: [    0.405998] brd: module loaded
Jun  3 17:10:00 officeaudio kernel: [    0.422423] loop: module loaded
Jun  3 17:10:00 officeaudio kernel: [    0.425333] Loading iSCSI transport class v2.0-870.
Jun  3 17:10:00 officeaudio kernel: [    0.429045] usbcore: registered new interface driver smsc95xx
Jun  3 17:10:00 officeaudio kernel: [    0.431823] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Jun  3 17:10:00 officeaudio kernel: [    0.462716] dwc_otg 20980000.usb: base=(ptrval)
Jun  3 17:10:00 officeaudio kernel: [    0.665846] Core Release: 2.80a
Jun  3 17:10:00 officeaudio kernel: [    0.668523] Setting default values for core params
Jun  3 17:10:00 officeaudio kernel: [    0.671205] Finished setting default values for core params
Jun  3 17:10:00 officeaudio kernel: [    0.874439] Using Buffer DMA mode
Jun  3 17:10:00 officeaudio kernel: [    0.877187] Periodic Transfer Interrupt Enhancement - disabled
Jun  3 17:10:00 officeaudio kernel: [    0.879902] Multiprocessor Interrupt Enhancement - disabled
Jun  3 17:10:00 officeaudio kernel: [    0.882723] OTG VER PARAM: 0, OTG VER FLAG: 0
Jun  3 17:10:00 officeaudio kernel: [    0.885630] Dedicated Tx FIFOs mode
Jun  3 17:10:00 officeaudio kernel: [    0.889244] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = db514000 dma = 0x5b514000 len=9024
Jun  3 17:10:00 officeaudio kernel: [    0.894924] FIQ FSM acceleration enabled for :
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Non-periodic Split Transactions
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Periodic Split Transactions
Jun  3 17:10:00 officeaudio kernel: [    0.894924] High-Speed Isochronous Endpoints
Jun  3 17:10:00 officeaudio kernel: [    0.894924] Interrupt/Control Split Transaction hack enabled
Jun  3 17:10:00 officeaudio kernel: [    0.907769] dwc_otg: Microframe scheduler enabled
Jun  3 17:10:00 officeaudio kernel: [    0.908050] WARN::hcd_init_fiq:457: FIQ on core 0
Jun  3 17:10:00 officeaudio kernel: [    0.910700] WARN::hcd_init_fiq:458: FIQ ASM at c04f4be0 length 36
Jun  3 17:10:00 officeaudio kernel: [    0.913267] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
Jun  3 17:10:00 officeaudio kernel: [    0.915926] dwc_otg 20980000.usb: DWC OTG Controller
Jun  3 17:10:00 officeaudio kernel: [    0.918563] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
Jun  3 17:10:00 officeaudio kernel: [    0.921259] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
Jun  3 17:10:00 officeaudio kernel: [    0.923967] Init: Port Power? op_state=1
Jun  3 17:10:00 officeaudio kernel: [    0.926538] Init: Power Port (0)
Jun  3 17:10:00 officeaudio kernel: [    0.929415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
Jun  3 17:10:00 officeaudio kernel: [    0.934616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Jun  3 17:10:00 officeaudio kernel: [    0.937379] usb usb1: Product: DWC OTG Controller
Jun  3 17:10:00 officeaudio kernel: [    0.940064] usb usb1: Manufacturer: Linux 4.19.46+ dwc_otg_hcd
Jun  3 17:10:00 officeaudio kernel: [    0.942796] usb usb1: SerialNumber: 20980000.usb
Jun  3 17:10:00 officeaudio kernel: [    0.946566] hub 1-0:1.0: USB hub found
Jun  3 17:10:00 officeaudio kernel: [    0.949295] hub 1-0:1.0: 1 port detected
Jun  3 17:10:00 officeaudio kernel: [    0.952861] dwc_otg: FIQ enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952876] dwc_otg: NAK holdoff enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952884] dwc_otg: FIQ split-transaction FSM enabled
Jun  3 17:10:00 officeaudio kernel: [    0.952903] Module dwc_common_port init
Jun  3 17:10:00 officeaudio kernel: [    0.953569] usbcore: registered new interface driver usb-storage
Jun  3 17:10:00 officeaudio kernel: [    0.956728] mousedev: PS/2 mouse device common for all mice
Jun  3 17:10:00 officeaudio kernel: [    0.960865] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
Jun  3 17:10:00 officeaudio kernel: [    0.964320] bcm2835-cpufreq: min=700000 max=1000000
Jun  3 17:10:00 officeaudio kernel: [    0.967857] sdhci: Secure Digital Host Controller Interface driver
Jun  3 17:10:00 officeaudio kernel: [    0.970684] sdhci: Copyright(c) Pierre Ossman
Jun  3 17:10:00 officeaudio kernel: [    0.974299] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
Jun  3 17:10:00 officeaudio kernel: [    0.977989] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
Jun  3 17:10:00 officeaudio kernel: [    0.981151] sdhci-pltfm: SDHCI platform and OF driver helper
Jun  3 17:10:00 officeaudio kernel: [    0.984877] ledtrig-cpu: registered to indicate activity on CPUs
Jun  3 17:10:00 officeaudio kernel: [    0.988028] hidraw: raw HID events driver (C) Jiri Kosina
Jun  3 17:10:00 officeaudio kernel: [    0.991231] usbcore: registered new interface driver usbhid
Jun  3 17:10:00 officeaudio kernel: [    0.994312] usbhid: USB HID core driver
Jun  3 17:10:00 officeaudio kernel: [    0.998270] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
Jun  3 17:10:00 officeaudio kernel: [    1.003568] [vc_sm_connected_init]: start
Jun  3 17:10:00 officeaudio kernel: [    1.014060] [vc_sm_connected_init]: end - returning 0
Jun  3 17:10:00 officeaudio kernel: [    1.018705] Initializing XFRM netlink socket
Jun  3 17:10:00 officeaudio kernel: [    1.021629] NET: Registered protocol family 17
Jun  3 17:10:00 officeaudio kernel: [    1.024647] Key type dns_resolver registered
Jun  3 17:10:00 officeaudio kernel: [    1.029268] registered taskstats version 1
Jun  3 17:10:00 officeaudio kernel: [    1.032133] Loading compiled-in X.509 certificates
Jun  3 17:10:00 officeaudio kernel: [    1.045421] uart-pl011 20201000.serial: cts_event_workaround enabled
Jun  3 17:10:00 officeaudio kernel: [    1.048469] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
Jun  3 17:10:00 officeaudio kernel: [    1.962658] console [ttyAMA0] enabled
Jun  3 17:10:00 officeaudio kernel: [    1.972061] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
Jun  3 17:10:00 officeaudio kernel: [    1.981120] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
Jun  3 17:10:00 officeaudio kernel: [    2.019478] sdhost: log_buf @ (ptrval) (5b513000)
Jun  3 17:10:00 officeaudio kernel: [    2.059217] random: fast init done
Jun  3 17:10:00 officeaudio kernel: [    2.070062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.078436] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Jun  3 17:10:00 officeaudio kernel: [    2.088531] of_cfs_init
Jun  3 17:10:00 officeaudio kernel: [    2.114270] of_cfs_init: OK
Jun  3 17:10:00 officeaudio kernel: [    2.120470] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.129188] Waiting for root device PARTUUID=7ee80803-02...
Jun  3 17:10:00 officeaudio kernel: [    2.138897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.150247] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
Jun  3 17:10:00 officeaudio kernel: [    2.216010] mmc0: host does not support reading read-only switch, assuming write-enable
Jun  3 17:10:00 officeaudio kernel: [    2.233458] mmc0: new high speed SDHC card at address aaaa
Jun  3 17:10:00 officeaudio kernel: [    2.244135] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
Jun  3 17:10:00 officeaudio kernel: [    2.254875]  mmcblk0: p1 p2
Jun  3 17:10:00 officeaudio kernel: [    2.289847] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
Jun  3 17:10:00 officeaudio kernel: [    2.300056] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
Jun  3 17:10:00 officeaudio kernel: [    2.321085] mmc1: new high speed SDIO card at address 0001
Jun  3 17:10:00 officeaudio kernel: [    2.677635] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
Jun  3 17:10:00 officeaudio kernel: [    2.704586] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
Jun  3 17:10:00 officeaudio kernel: [    2.712669] EXT4-fs (mmcblk0p2): recovery complete
Jun  3 17:10:00 officeaudio kernel: [    2.749564] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
Jun  3 17:10:00 officeaudio kernel: [    2.763106] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
Jun  3 17:10:00 officeaudio kernel: [    2.782843] devtmpfs: mounted
Jun  3 17:10:00 officeaudio kernel: [    2.793058] Freeing unused kernel memory: 456K
Jun  3 17:10:00 officeaudio kernel: [    2.800483] This architecture does not have kernel memory protection.
Jun  3 17:10:00 officeaudio kernel: [    2.809890] Run /sbin/init as init process
Jun  3 17:10:00 officeaudio kernel: [    3.527469] NET: Registered protocol family 10
Jun  3 17:10:00 officeaudio kernel: [    3.537223] Segment Routing with IPv6
Jun  3 17:10:00 officeaudio kernel: [    3.584076] random: systemd: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    3.734428] random: systemd: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    3.950866] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
Jun  3 17:10:00 officeaudio kernel: [    4.051035] uart-pl011 20201000.serial: no DMA platform data
Jun  3 17:10:00 officeaudio kernel: [    7.766879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
Jun  3 17:10:00 officeaudio kernel: [   10.826879] media: Linux media interface: v0.10
Jun  3 17:10:00 officeaudio kernel: [   10.901096] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   10.903262] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
Jun  3 17:10:00 officeaudio kernel: [   10.903284] [vc_sm_connected_init]: start
Jun  3 17:10:00 officeaudio kernel: [   10.940720] [vc_sm_connected_init]: installed successfully
Jun  3 17:10:00 officeaudio kernel: [   10.971312] videodev: Linux video capture interface: v2.00
Jun  3 17:10:00 officeaudio kernel: [   11.096309] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.124719] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.181225] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.188104] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
Jun  3 17:10:00 officeaudio kernel: [   11.234123] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
Jun  3 17:10:00 officeaudio kernel: [   11.234145] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
Jun  3 17:10:00 officeaudio kernel: [   11.265484] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
Jun  3 17:10:00 officeaudio kernel: [   11.265506] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
Jun  3 17:10:00 officeaudio kernel: [   11.283780] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
Jun  3 17:10:00 officeaudio kernel: [   11.283803] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
Jun  3 17:10:00 officeaudio kernel: [   11.745908] snd-rpi-simple soc:sound: pcm5102a-hifi <-> 20203000.i2s mapping ok
Jun  3 17:10:00 officeaudio kernel: [   12.377835] cfg80211: Loading compiled-in X.509 certificates for regulatory database
Jun  3 17:10:00 officeaudio kernel: [   12.538215] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
Jun  3 17:10:00 officeaudio kernel: [   12.949995] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
Jun  3 17:10:00 officeaudio kernel: [   12.964687] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Jun  3 17:10:00 officeaudio kernel: [   12.965102] usbcore: registered new interface driver brcmfmac
Jun  3 17:10:00 officeaudio kernel: [   13.189186] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
Jun  3 17:10:00 officeaudio kernel: [   13.189368] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
Jun  3 17:10:00 officeaudio kernel: [   13.190500] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
Jun  3 17:10:00 officeaudio systemd[1]: Starting WPA supplicant...
Jun  3 17:10:01 officeaudio systemd[1]: Starting LSB: Switch to ondemand cpu governor (unless shift key is pressed)...
Jun  3 17:10:01 officeaudio systemd[1]: apt-daily-upgrade.timer: Adding 26min 18.609695s random time.
Jun  3 17:10:01 officeaudio systemd[1]: Started Daily apt upgrade and clean activities.
Jun  3 17:10:01 officeaudio systemd[1]: Reached target Timers.
Jun  3 17:10:01 officeaudio systemd[1]: Starting Save/Restore Sound Card State...
Jun  3 17:10:01 officeaudio systemd[1]: Starting Login Service...
Jun  3 17:10:01 officeaudio systemd[1]: Starting Avahi mDNS/DNS-SD Stack...
Jun  3 17:10:01 officeaudio systemd[1]: Starting dhcpcd on all interfaces...
Jun  3 17:10:01 officeaudio wpa_supplicant[247]: Successfully initialized wpa_supplicant
Jun  3 17:10:01 officeaudio systemd[1]: Starting Disable WiFi if country not set...
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Found user 'avahi' (UID 108) and group 'avahi' (GID 112).
Jun  3 17:10:01 officeaudio systemd[1]: Started System Logging Service.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully dropped root privileges.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: avahi-daemon 0.6.32 starting up.
Jun  3 17:10:01 officeaudio systemd[1]: Started Save/Restore Sound Card State.
Jun  3 17:10:01 officeaudio dhcpcd[256]: dev: loaded udev
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully called chroot().
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Successfully dropped remaining capabilities.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Loading service file /services/moode.service.
Jun  3 17:10:01 officeaudio systemd[1]: Started Disable WiFi if country not set.
Jun  3 17:10:01 officeaudio avahi-daemon[254]: Loading service file /services/udisks.service.
Jun  3 17:10:01 officeaudio dhcpcd[256]: no valid interfaces found
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Network interface enumeration completed.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Server startup complete. Host name is officeaudio.local. Local service cookie is 754431248.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Service "officeaudio" (/services/udisks.service) successfully established.
Jun  3 17:10:02 officeaudio avahi-daemon[254]: Service "moOde audio player: officeaudio" (/services/moode.service) successfully established.
Jun  3 17:10:02 officeaudio raspi-config[248]: Checking if shift key is held down: No. Switching to ondemand scaling governor.
Jun  3 17:10:02 officeaudio systemd[1]: Started LSB: Start/stop sysstat's sadc.
Jun  3 17:10:02 officeaudio systemd[1]: Started LSB: Switch to ondemand cpu governor (unless shift key is pressed).
Jun  3 17:10:02 officeaudio systemd[1]: Started WPA supplicant.
Jun  3 17:10:02 officeaudio systemd[1]: Started Avahi mDNS/DNS-SD Stack.
Jun  3 17:10:02 officeaudio systemd[1]: Started Login Service.
Jun  3 17:10:02 officeaudio systemd[1]: Started Raise network interfaces.
Jun  3 17:10:03 officeaudio systemd[1]: Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Jun  3 17:10:03 officeaudio systemd[1]: Starting Load/Save RF Kill Switch Status...
Jun  3 17:10:03 officeaudio systemd[1]: Reached target Sound Card.
Jun  3 17:10:03 officeaudio systemd[1]: Started Load/Save RF Kill Switch Status.
Jun  3 17:10:03 officeaudio dhcpcd[256]: wlan0: starting wpa_supplicant
Jun  3 17:10:03 officeaudio dhcpcd-run-hooks[305]: wlan0: starting wpa_supplicant
Jun  3 17:10:03 officeaudio kernel: [   20.044838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Jun  3 17:10:03 officeaudio kernel: [   20.044883] brcmfmac: power management disabled
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: waiting for carrier
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: carrier acquired
Jun  3 17:10:04 officeaudio dhcpcd[256]: DUID 00:01:00:01:24:65:ab:83:b8:27:eb:b9:13:e7
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: IAID eb:6e:91:5c
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: adding address fe80::ed9d:8793:fd89:4f81
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::ed9d:8793:fd89:4f81.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv6 for mDNS.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Registering new address record for fe80::ed9d:8793:fd89:4f81 on wlan0.*.
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: probing address 192.168.1.92/24
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: carrier lost
Jun  3 17:10:04 officeaudio dhcpcd[256]: wlan0: deleting address fe80::ed9d:8793:fd89:4f81
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Withdrawing address record for fe80::ed9d:8793:fd89:4f81 on wlan0.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Leaving mDNS multicast group on interface wlan0.IPv6 with address fe80::ed9d:8793:fd89:4f81.
Jun  3 17:10:04 officeaudio avahi-daemon[254]: Interface wlan0.IPv6 no longer relevant for mDNS.
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: carrier acquired
Jun  3 17:10:05 officeaudio kernel: [   21.429017] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: IAID eb:6e:91:5c
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: adding address fe80::40c7:c52b:86cb:8443
Jun  3 17:10:05 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv6 with address fe80::40c7:c52b:86cb:8443.
Jun  3 17:10:05 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv6 for mDNS.
Jun  3 17:10:05 officeaudio avahi-daemon[254]: Registering new address record for fe80::40c7:c52b:86cb:8443 on wlan0.*.
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: probing address 192.168.1.92/24
Jun  3 17:10:05 officeaudio dhcpcd[256]: wlan0: soliciting an IPv6 router
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: using static address 192.168.1.92/24
Jun  3 17:10:10 officeaudio avahi-daemon[254]: Joining mDNS multicast group on interface wlan0.IPv4 with address 192.168.1.92.
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: adding route to 192.168.1.0/24
Jun  3 17:10:10 officeaudio dhcpcd[256]: wlan0: adding default route via 192.168.1.1
Jun  3 17:10:10 officeaudio avahi-daemon[254]: New relevant interface wlan0.IPv4 for mDNS.
Jun  3 17:10:10 officeaudio avahi-daemon[254]: Registering new address record for 192.168.1.92 on wlan0.IPv4.
Jun  3 17:10:10 officeaudio dhcpcd[256]: forked to background, child pid 376
Jun  3 17:10:10 officeaudio systemd[1]: Started dhcpcd on all interfaces.
Jun  3 17:10:10 officeaudio systemd[1]: Reached target Network.
Jun  3 17:10:10 officeaudio systemd[1]: Starting OpenBSD Secure Shell server...
Jun  3 17:10:10 officeaudio systemd[1]: Starting The PHP 7.0 FastCGI Process Manager...
Jun  3 17:10:10 officeaudio systemd[1]: Starting A high performance web server and a reverse proxy server...
Jun  3 17:10:10 officeaudio systemd[1]: Reached target Network is Online.
Jun  3 17:10:10 officeaudio systemd[1]: Starting Samba NMB Daemon...
Jun  3 17:10:10 officeaudio systemd[1]: Started memcached daemon.
Jun  3 17:10:10 officeaudio systemd[1]: Starting Permit User Sessions...
Jun  3 17:10:10 officeaudio systemd[1]: Starting /etc/rc.local Compatibility...
Jun  3 17:10:11 officeaudio systemd[1]: Started Permit User Sessions.
Jun  3 17:10:11 officeaudio dbus[240]: [system] Activating via systemd: service name='org.freedesktop.UDisks' unit='udisks.service'
Jun  3 17:10:11 officeaudio systemd[1]: Starting Disk Manager (legacy version)...
Jun  3 17:10:12 officeaudio dbus[240]: [system] Successfully activated service 'org.freedesktop.UDisks'
Jun  3 17:10:12 officeaudio systemd[1]: Started Disk Manager (legacy version).
Jun  3 17:10:12 officeaudio systemd[1]: Started OpenBSD Secure Shell server.
Jun  3 17:10:12 officeaudio dbus[240]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Jun  3 17:10:12 officeaudio systemd[1]: Starting Authorization Manager...
Jun  3 17:10:13 officeaudio polkitd[404]: started daemon version 0.105 using authority implementation `local' version `0.105'
Jun  3 17:10:13 officeaudio dbus[240]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Jun  3 17:10:13 officeaudio systemd[1]: Started Authorization Manager.
Jun  3 17:10:13 officeaudio systemd[1]: Started The PHP 7.0 FastCGI Process Manager.
Jun  3 17:10:14 officeaudio systemd[1]: Started A high performance web server and a reverse proxy server.
Jun  3 17:10:14 officeaudio systemd[1]: nmbd.service: Supervising process 422 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:14 officeaudio systemd[1]: Started Samba NMB Daemon.
Jun  3 17:10:14 officeaudio nmbd[422]: [2019/06/03 17:10:14.680755,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:14 officeaudio nmbd[422]:   STATUS=daemon 'nmbd' finished starting up and ready to serve connections
Jun  3 17:10:14 officeaudio systemd[1]: Starting Samba Winbind Daemon...
Jun  3 17:10:14 officeaudio systemd[1]: Started /etc/rc.local Compatibility.
Jun  3 17:10:14 officeaudio systemd[1]: Starting Hold until boot process finishes up...
Jun  3 17:10:14 officeaudio systemd[1]: Starting Terminate Plymouth Boot Screen...
Jun  3 17:10:15 officeaudio systemd[1]: Received SIGRTMIN+21 from PID 128 (plymouthd).
Jun  3 17:10:15 officeaudio systemd[1]: Started Terminate Plymouth Boot Screen.
Jun  3 17:10:15 officeaudio systemd[1]: Started Hold until boot process finishes up.
Jun  3 17:10:15 officeaudio systemd[1]: Started Serial Getty on ttyAMA0.
Jun  3 17:10:15 officeaudio systemd[1]: Started Getty on tty1.
Jun  3 17:10:15 officeaudio systemd[1]: Reached target Login Prompts.
Jun  3 17:10:16 officeaudio systemd[1]: winbind.service: Supervising process 476 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:16 officeaudio winbindd[476]: [2019/06/03 17:10:16.941041,  0] ../source3/winbindd/winbindd_cache.c:3244(initialize_winbindd_cache)
Jun  3 17:10:16 officeaudio winbindd[476]:   initialize_winbindd_cache: clearing cache and re-creating with version number 2
Jun  3 17:10:17 officeaudio systemd[1]: Started Samba Winbind Daemon.
Jun  3 17:10:17 officeaudio winbindd[476]: [2019/06/03 17:10:17.839448,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:17 officeaudio winbindd[476]:   STATUS=daemon 'winbindd' finished starting up and ready to serve connections
Jun  3 17:10:17 officeaudio systemd[1]: Starting Samba SMB Daemon...
Jun  3 17:10:19 officeaudio dhcpcd[376]: wlan0: no IPv6 Routers available
Jun  3 17:10:20 officeaudio systemd[1]: smbd.service: Supervising process 486 which is not our child. We'll most likely not notice when it exits.
Jun  3 17:10:20 officeaudio systemd[1]: Started Samba SMB Daemon.
Jun  3 17:10:20 officeaudio systemd[1]: Reached target Multi-User System.
Jun  3 17:10:20 officeaudio systemd[1]: Starting Update UTMP about System Runlevel Changes...
Jun  3 17:10:20 officeaudio smbd[486]: [2019/06/03 17:10:20.660820,  0] ../lib/util/become_daemon.c:124(daemon_ready)
Jun  3 17:10:20 officeaudio smbd[486]:   STATUS=daemon 'smbd' finished starting up and ready to serve connections
Jun  3 17:10:20 officeaudio systemd[1]: Started Update UTMP about System Runlevel Changes.
Jun  3 17:10:20 officeaudio systemd[1]: Startup finished in 3.296s (kernel) + 33.699s (userspace) = 36.996s.
Jun  3 17:10:24 officeaudio systemd[1]: [/lib/systemd/system/mpd.service:32] CPU scheduling priority is out of range, ignoring: 43
Jun  3 17:10:24 officeaudio systemd[1]: Started Music Player Daemon.
Jun  3 17:10:26 officeaudio systemd[1]: Started UPnP Renderer front-end to MPD.
Jun  3 17:10:26 officeaudio shairport-sync: Invalid disable_standby_mode option choice "uto". It should be "always", "auto" or "never". It is set to "never".
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for gmusic because gmusicuser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for qobuz because qobuzuser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for tidal because tidaluser is not defined in configuration
Jun  3 17:10:26 officeaudio upmpdcli[800]: :4:src/mediaserver/contentdirectory.cxx:179::ContentDirectory: not creating entry for uprcl because uprcluser is not defined in configuration
Jun  3 17:10:27 officeaudio systemd[1]: Started BluezAlsa proxy.
Jun  3 17:10:27 officeaudio shairport-sync: Note: this device may be too slow for "soxr" interpolation. Consider choosing the "basic" or "auto" interpolation setting.
Jun  3 17:10:27 officeaudio dbus[240]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Jun  3 17:10:27 officeaudio dbus[240]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service not found.
Jun  3 17:10:27 officeaudio bluealsa[848]: /usr/bin/bluealsa: Couldn't get managed objects: GDBus.Error:org.freedesktop.systemd1.NoSuchUnit: Unit dbus-org.bluez.service not found.
Jun  3 17:16:38 officeaudio systemd[1]: Time has been changed
Jun  3 17:16:38 officeaudio systemd[1]: apt-daily.timer: Adding 2h 58min 58.321314s random time.
Jun  3 17:16:38 officeaudio systemd[1]: apt-daily-upgrade.timer: Adding 28min 33.936560s random time.
Jun  3 17:16:38 officeaudio systemd-timesyncd[214]: Synchronized to time server 216.229.4.66:123 (2.debian.pool.ntp.org).
Jun  3 17:17:23 officeaudio systemd[1]: Created slice User Slice of pi.
Jun  3 17:17:23 officeaudio systemd[1]: Starting User Manager for UID 1000...
Jun  3 17:17:23 officeaudio systemd[1]: Started Session c1 of user pi.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Timers.
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent (ssh-agent emulation).
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent and passphrase cache (restricted).
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent and passphrase cache.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Paths.
Jun  3 17:17:23 officeaudio systemd[886]: Listening on GnuPG cryptographic agent (access for web browsers).
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Sockets.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Basic System.
Jun  3 17:17:23 officeaudio systemd[886]: Reached target Default.
Jun  3 17:17:23 officeaudio systemd[886]: Startup finished in 155ms.
Jun  3 17:17:23 officeaudio systemd[1]: Started User Manager for UID 1000.
Jun  3 17:18:54 officeaudio kernel: [  182.861425] random: crng init done
Jun  3 17:18:54 officeaudio kernel: [  182.861443] random: 7 urandom warning(s) missed due to ratelimiting

Code:
pi@officeaudio:~ $ dmesg
[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 4.19.46+ (dom@dom-XPS-13-9370) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1230 Tue May 28 16:00:00 BST 2019
[    0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
[    0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
[    0.000000] Memory policy: Data cache writeback
[    0.000000] cma: Reserved 8 MiB at 0x1b400000
[    0.000000] On node 0 totalpages: 114688
[    0.000000]   Normal zone: 1008 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 114688 pages, LIFO batch:31
[    0.000000] random: get_random_bytes called from start_kernel+0x8c/0x49c with crng_init=0
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 113680
[    0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbswap=1 smsc95xx.macaddr=B8:27:EB:3B:C4:09 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000  net.ifnames=0 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] Memory: 434484K/458752K available (6933K kernel code, 633K rwdata, 2068K rodata, 456K init, 797K bss, 16076K reserved, 8192K cma-reserved)
[    0.000000] Virtual kernel memory layout:
                  vector  : 0xffff0000 - 0xffff1000   (   4 kB)
                  fixmap  : 0xffc00000 - 0xfff00000   (3072 kB)
                  vmalloc : 0xdc800000 - 0xff800000   ( 560 MB)
                  lowmem  : 0xc0000000 - 0xdc000000   ( 448 MB)
                  modules : 0xbf000000 - 0xc0000000   (  16 MB)
                    .text : 0x(ptrval) - 0x(ptrval)   (6935 kB)
                    .init : 0x(ptrval) - 0x(ptrval)   ( 456 kB)
                    .data : 0x(ptrval) - 0x(ptrval)   ( 634 kB)
                     .bss : 0x(ptrval) - 0x(ptrval)   ( 798 kB)
[    0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] ftrace: allocating 25050 entries in 74 pages
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000028] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
[    0.000087] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
[    0.000195] bcm2835: system timer (irq = 27)
[    0.000791] Console: colour dummy device 80x30
[    0.001443] console [tty1] enabled
[    0.001530] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
[    0.060371] pid_max: default: 32768 minimum: 301
[    0.060941] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.061002] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[    0.062452] CPU: Testing write buffer coherency: ok
[    0.063804] Setting up static identity map for 0x8200 - 0x8238
[    0.065235] devtmpfs: initialized
[    0.076497] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
[    0.076988] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.077067] futex hash table entries: 256 (order: -1, 3072 bytes)
[    0.078466] pinctrl core: initialized pinctrl subsystem
[    0.080061] NET: Registered protocol family 16
[    0.083418] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.090847] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[    0.090920] hw-breakpoint: maximum watchpoint size is 4 bytes.
[    0.091094] Serial: AMBA PL011 UART driver
[    0.094911] bcm2835-mbox 2000b880.mailbox: mailbox enabled
[    0.138767] bcm2835-dma 20007000.dma: DMA legacy API manager at (ptrval), dmachans=0x1
[    0.141450] SCSI subsystem initialized
[    0.141777] usbcore: registered new interface driver usbfs
[    0.141939] usbcore: registered new interface driver hub
[    0.142199] usbcore: registered new device driver usb
[    0.160965] raspberrypi-firmware soc:firmware: Attached to firmware from 2019-05-28 16:21, variant start
[    0.170993] raspberrypi-firmware soc:firmware: Firmware hash is f37252430f9659d04032b6e0123d7950e3f9d92c
[    0.183404] clocksource: Switched to clocksource timer
[    0.286143] VFS: Disk quotas dquot_6.6.0
[    0.286326] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.286686] FS-Cache: Loaded
[    0.287056] CacheFiles: Loaded
[    0.305929] NET: Registered protocol family 2
[    0.307308] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes)
[    0.307432] TCP established hash table entries: 4096 (order: 2, 16384 bytes)
[    0.307546] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.307666] TCP: Hash tables configured (established 4096 bind 4096)
[    0.307860] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.307927] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.308371] NET: Registered protocol family 1
[    0.309498] RPC: Registered named UNIX socket transport module.
[    0.309563] RPC: Registered udp transport module.
[    0.309593] RPC: Registered tcp transport module.
[    0.309621] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.311815] hw perfevents: no irqs for PMU, sampling events not supported
[    0.311938] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
[    0.316285] Initialise system trusted keyrings
[    0.316753] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.331681] FS-Cache: Netfs 'nfs' registered for caching
[    0.333047] NFS: Registering the id_resolver key type
[    0.333150] Key type id_resolver registered
[    0.333185] Key type id_legacy registered
[    0.333237] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    0.338971] Key type asymmetric registered
[    0.339040] Asymmetric key parser 'x509' registered
[    0.339174] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.339683] io scheduler noop registered
[    0.339740] io scheduler deadline registered (default)
[    0.340357] io scheduler cfq registered
[    0.340411] io scheduler mq-deadline registered (default)
[    0.340448] io scheduler kyber registered
[    0.343849] BCM2708FB: allocated DMA memory 0x5b500000
[    0.343961] BCM2708FB: allocated DMA channel 0
[    0.351975] Console: switching to colour frame buffer device 82x26
[    0.361097] Serial: 8250/16550 driver, 1 ports, IRQ sharing enabled
[    0.366615] bcm2835-rng 20104000.rng: hwrng registered
[    0.369634] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
[    0.376106] vc-sm: Videocore shared memory driver
[    0.379522] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
[    0.405998] brd: module loaded
[    0.422423] loop: module loaded
[    0.425333] Loading iSCSI transport class v2.0-870.
[    0.429045] usbcore: registered new interface driver smsc95xx
[    0.431823] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[    0.462716] dwc_otg 20980000.usb: base=(ptrval)
[    0.665846] Core Release: 2.80a
[    0.668523] Setting default values for core params
[    0.671205] Finished setting default values for core params
[    0.874439] Using Buffer DMA mode
[    0.877187] Periodic Transfer Interrupt Enhancement - disabled
[    0.879902] Multiprocessor Interrupt Enhancement - disabled
[    0.882723] OTG VER PARAM: 0, OTG VER FLAG: 0
[    0.885630] Dedicated Tx FIFOs mode
[    0.889244] WARN::dwc_otg_hcd_init:1045: FIQ DMA bounce buffers: virt = db514000 dma = 0x5b514000 len=9024
[    0.894924] FIQ FSM acceleration enabled for :
              Non-periodic Split Transactions
              Periodic Split Transactions
              High-Speed Isochronous Endpoints
              Interrupt/Control Split Transaction hack enabled
[    0.907769] dwc_otg: Microframe scheduler enabled
[    0.908050] WARN::hcd_init_fiq:457: FIQ on core 0
[    0.910700] WARN::hcd_init_fiq:458: FIQ ASM at c04f4be0 length 36
[    0.913267] WARN::hcd_init_fiq:484: MPHI regs_base at f0006000
[    0.915926] dwc_otg 20980000.usb: DWC OTG Controller
[    0.918563] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
[    0.921259] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
[    0.923967] Init: Port Power? op_state=1
[    0.926538] Init: Power Port (0)
[    0.929415] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
[    0.934616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.937379] usb usb1: Product: DWC OTG Controller
[    0.940064] usb usb1: Manufacturer: Linux 4.19.46+ dwc_otg_hcd
[    0.942796] usb usb1: SerialNumber: 20980000.usb
[    0.946566] hub 1-0:1.0: USB hub found
[    0.949295] hub 1-0:1.0: 1 port detected
[    0.952861] dwc_otg: FIQ enabled
[    0.952876] dwc_otg: NAK holdoff enabled
[    0.952884] dwc_otg: FIQ split-transaction FSM enabled
[    0.952903] Module dwc_common_port init
[    0.953569] usbcore: registered new interface driver usb-storage
[    0.956728] mousedev: PS/2 mouse device common for all mice
[    0.960865] bcm2835-wdt 20100000.watchdog: Broadcom BCM2835 watchdog timer
[    0.964320] bcm2835-cpufreq: min=700000 max=1000000
[    0.967857] sdhci: Secure Digital Host Controller Interface driver
[    0.970684] sdhci: Copyright(c) Pierre Ossman
[    0.974299] mmc-bcm2835 20300000.mmcnr: could not get clk, deferring probe
[    0.977989] sdhost-bcm2835 20202000.mmc: could not get clk, deferring probe
[    0.981151] sdhci-pltfm: SDHCI platform and OF driver helper
[    0.984877] ledtrig-cpu: registered to indicate activity on CPUs
[    0.988028] hidraw: raw HID events driver (C) Jiri Kosina
[    0.991231] usbcore: registered new interface driver usbhid
[    0.994312] usbhid: USB HID core driver
[    0.998270] vchiq: vchiq_init_state: slot_zero = (ptrval), is_master = 0
[    1.003568] [vc_sm_connected_init]: start
[    1.014060] [vc_sm_connected_init]: end - returning 0
[    1.018705] Initializing XFRM netlink socket
[    1.021629] NET: Registered protocol family 17
[    1.024647] Key type dns_resolver registered
[    1.029268] registered taskstats version 1
[    1.032133] Loading compiled-in X.509 certificates
[    1.045421] uart-pl011 20201000.serial: cts_event_workaround enabled
[    1.048469] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
[    1.962658] console [ttyAMA0] enabled
[    1.972061] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
[    1.981120] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
[    2.019478] sdhost: log_buf @ (ptrval) (5b513000)
[    2.059217] random: fast init done
[    2.070062] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[    2.078436] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[    2.088531] of_cfs_init
[    2.114270] of_cfs_init: OK
[    2.120470] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.129188] Waiting for root device PARTUUID=7ee80803-02...
[    2.138897] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[    2.150247] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[    2.216010] mmc0: host does not support reading read-only switch, assuming write-enable
[    2.233458] mmc0: new high speed SDHC card at address aaaa
[    2.244135] mmcblk0: mmc0:aaaa SL08G 7.40 GiB
[    2.254875]  mmcblk0: p1 p2
[    2.289847] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
[    2.300056] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
[    2.321085] mmc1: new high speed SDIO card at address 0001
[    2.677635] EXT4-fs (mmcblk0p2): orphan cleanup on readonly fs
[    2.704586] EXT4-fs (mmcblk0p2): 3 orphan inodes deleted
[    2.712669] EXT4-fs (mmcblk0p2): recovery complete
[    2.749564] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.763106] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.782843] devtmpfs: mounted
[    2.793058] Freeing unused kernel memory: 456K
[    2.800483] This architecture does not have kernel memory protection.
[    2.809890] Run /sbin/init as init process
[    3.351636] systemd[1]: System time before build time, advancing clock.
[    3.527469] NET: Registered protocol family 10
[    3.537223] Segment Routing with IPv6
[    3.584076] random: systemd: uninitialized urandom read (16 bytes read)
[    3.604470] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
[    3.632844] systemd[1]: Detected architecture arm.
[    3.662662] systemd[1]: Set hostname to <officeaudio>.
[    3.734428] random: systemd: uninitialized urandom read (16 bytes read)
[    3.950866] random: systemd-cryptse: uninitialized urandom read (16 bytes read)
[    4.051035] uart-pl011 20201000.serial: no DMA platform data
[    4.967766] systemd[1]: Listening on fsck to fsckd communication Socket.
[    5.011002] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[    5.032161] systemd[1]: Listening on Syslog Socket.
[    5.045500] systemd[1]: Listening on udev Kernel Socket.
[    5.060296] systemd[1]: Created slice User and Session Slice.
[    5.074816] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    5.094200] systemd[1]: Listening on Journal Socket (/dev/log).
[    7.766879] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[    8.436489] systemd-journald[64]: Received request to flush runtime journal from PID 1
[   10.826879] media: Linux media interface: v0.10
[   10.901096] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[   10.903262] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[   10.903284] [vc_sm_connected_init]: start
[   10.940720] [vc_sm_connected_init]: installed successfully
[   10.971312] videodev: Linux video capture interface: v2.00
[   11.096309] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   11.124719] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[   11.181225] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[   11.188104] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[   11.234123] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[   11.234145] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[   11.265484] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[   11.265506] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[   11.283780] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[   11.283803] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[   11.745908] snd-rpi-simple soc:sound: pcm5102a-hifi <-> 20203000.i2s mapping ok
[   12.377835] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.538215] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.949995] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[   12.964687] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   12.965102] usbcore: registered new interface driver brcmfmac
[   13.189186] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[   13.189368] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
[   13.190500] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[   20.044838] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   20.044883] brcmfmac: power management disabled
[   21.429017] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[  182.861425] random: crng init done
[  182.861443] random: 7 urandom warning(s) missed due to ratelimiting

Code:
pi@officeaudio:~ $ cat /var/log/mpd/log
Jun 03 10:02 : exception: Integer expected: undefined
Jun 03 12:34 : player: Decoder is too slow; playing silence to avoid xrun
Jun 03 14:37 : player: played "http://stream-tx3.radioparadise.com/aac-320"

Code:
pi@officeaudio:~ $ moodeutl -l
20190603 171014 worker: - Start
20190603 171014 worker: Successfully daemonized
20190603 171014 worker: Integrity check (passed)
20190603 171015 worker: ALSA volume (None)
20190603 171016 worker: Session loaded
20190603 171016 worker: Debug logging (off)
20190603 171016 worker: - Platform
20190603 171020 worker: Rel  (Moode 5.3 2019-05-30)
20190603 171020 worker: Upd  (None)
20190603 171020 worker: Rasp (9.9)
20190603 171020 worker: Kern (4.19.46+)
20190603 171020 worker: MPD  (0.20.23)
20190603 171020 worker: Host (officeaudio)
20190603 171020 worker: Hdwr (Pi-Zero W 512MB v1.1)
20190603 171020 worker: Arch (armv6l)
20190603 171020 worker: Gov  (performance)
20190603 171021 worker: USB boot not enabled yet
20190603 171021 worker: File system expanded
20190603 171021 worker: HDMI port off
20190603 171022 worker: File check ok
20190603 171022 worker: - Network
20190603 171022 worker: eth0 does not exist
20190603 171022 worker: eth0 address not assigned
20190603 171022 worker: wlan0 exists
20190603 171022 worker: wifi country (US)
20190603 171022 worker: wlan0 trying SSID (ufomb2)
20190603 171022 worker: wlan0 (192.168.1.92)
20190603 171022 worker: - Audio
20190603 171023 worker: ALSA outputs unmuted
20190603 171023 worker: ALSA card number (0)
20190603 171023 worker: Audio output (I2S audio device)
20190603 171023 worker: Audio device (HiFiBerry DAC+ Light)
20190603 171023 worker: ALSA mixer name (Digital)
20190603 171023 worker: MPD volume control (software)
20190603 171023 worker: Hdwr volume controller not detected
20190603 171023 worker: - Services
20190603 171023 worker: Reset renderer active state
20190603 171024 worker: MPD conf updated
20190603 171024 worker: MPD started
20190603 171025 worker: MPD accepting connections
20190603 171025 worker: Configure MPD outputs
20190603 171025 worker: MPD output 1 ALSA default (on)
20190603 171025 worker: MPD output 2 ALSA crossfeed (off)
20190603 171025 worker: MPD output 3 ALSA parametric eq (off)
20190603 171025 worker: MPD output 4 ALSA graphic eq (off)
20190603 171025 worker: MPD output 5 ALSA polarity inversion (off)
20190603 171025 worker: MPD output 6 ALSA bluetooth (off)
20190603 171025 worker: MPD output 7 HTTP stream (off)
20190603 171025 worker: MPD crossfade (off)
20190603 171025 worker: Audio source (Local)
20190603 171025 worker: Output device (Local)
20190603 171025 worker: Airplay receiver started
20190603 171026 worker: UPnP renderer started
20190603 171026 worker: Bluetooth controller started

Code:
pi@officeaudio:~ $ cat /boot/config.txt
disable_splash=1
hdmi_drive=2
dtparam=i2c_arm=on
dtparam=i2s=on
dtparam=audio=off
dtoverlay=hifiberry-dac
#dtoverlay=pi3-disable-wifi
dtoverlay=pi3-disable-bt

Code:
pi@officeaudio:~ $ cat /boot/cmdline.txt
net.ifnames=0 dwc_otg.lpm_enable=0 console=serial0,115200 console=tty1 root=PARTUUID=7ee80803-02 rootfstype=ext4 elevator=deadline fsck.repair=yes rootwait

As a courtesy I placed the lengthy log output in Code boxes for readability. The Code box button is on the right side of the Toolbar when composing a post.

Please use it when posting log output or commands.

--- ACK -- Thank you.  I totally forgot to use the Code box.
Reply
#14
Nothing sticks out in the logs.

I'll boot up a 0W with a fresh 5.3 image and configure it with Airplay, UPnP and Bluetooth ON and see if I can repro you issues. I don't have your particular DAC but I can pop on an IQaudIO DACZero.

-Tim
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#15
(06-03-2019, 11:25 PM)Tim Curtis Wrote: Nothing sticks out in the logs.

I'll boot up a 0W with a fresh 5.3 image and configure it with Airplay, UPnP and Bluetooth ON and see if I can repro you issues. I don't have your particular DAC but I can pop on an IQaudIO DACZero.

-Tim

FYI - I've also disabled bluetooth on all of the devices in case there was some weird kernel issue.  UPNP isn't mandatory either.  The one device that I have plugged into the wall (Ethernet) has had zero connectivity problems.  These are devices that I've been running the last two releases on Moode on with zero issues.  So it's weird to me that I have the same problem with three devices after updating (clean install) to 5.2/3.  FYI, I've also swapped out microsd cards, and these devices sit headless and run various parts of my audio system at home / in the garage / porch / office.

I'm supper happy to do whatever testing you need, I can provide photos of the hardware, anything you need.
Reply
#16
I'm not seeing any issues with my 0W and fresh 5.3 image. Below is the moOde log.

Code:
pi@rp7:~ $ moodeutl -l
20190603 193903 worker: - Start
20190603 193903 worker: Successfully daemonized
20190603 193903 worker: Integrity check (passed)
20190603 193905 worker: ALSA volume set to (0%)
20190603 193905 worker: Session loaded
20190603 193905 worker: Debug logging (off)
20190603 193905 worker: - Platform
20190603 193909 worker: Rel  (Moode 5.3 2019-05-30)
20190603 193909 worker: Upd  (None)
20190603 193909 worker: Rasp (9.9)
20190603 193909 worker: Kern (4.19.46+)
20190603 193909 worker: MPD  (0.20.23)
20190603 193909 worker: Host (rp7)
20190603 193909 worker: Hdwr (Pi-Zero W 512MB v1.1)
20190603 193909 worker: Arch (armv6l)
20190603 193909 worker: Gov  (performance)
20190603 193909 worker: USB boot not enabled yet
20190603 193909 worker: File system not expanded yet
20190603 193909 worker: HDMI port on
20190603 193910 worker: File check ok
20190603 193910 worker: - Network
20190603 193910 worker: eth0 does not exist
20190603 193910 worker: eth0 address not assigned
20190603 193911 worker: wlan0 exists
20190603 193911 worker: wifi country (US)
20190603 193911 worker: wlan0 trying SSID (AirnetN2)
20190603 193911 worker: wlan0 (192.168.1.196)
20190603 193911 worker: - Audio
20190603 193912 worker: ALSA outputs unmuted
20190603 193912 worker: ALSA card number (0)
20190603 193912 worker: Audio output (I2S audio device)
20190603 193912 worker: Audio device (IQaudIO Pi-DACZero)
20190603 193912 worker: ALSA mixer name (Digital)
20190603 193912 worker: MPD volume control (hardware)
20190603 193912 worker: Hdwr volume controller exists
20190603 193912 worker: Chip options (Burr Brown PCM5122)
20190603 193912 worker: - Services
20190603 193912 worker: Reset renderer active state
20190603 193913 worker: MPD conf updated
20190603 193913 worker: MPD started
20190603 193914 worker: MPD accepting connections
20190603 193914 worker: Configure MPD outputs
20190603 193915 worker: MPD output 1 ALSA default (on)
20190603 193915 worker: MPD output 2 ALSA crossfeed (off)
20190603 193915 worker: MPD output 3 ALSA parametric eq (off)
20190603 193915 worker: MPD output 4 ALSA graphic eq (off)
20190603 193915 worker: MPD output 5 ALSA polarity inversion (off)
20190603 193915 worker: MPD output 6 ALSA bluetooth (off)
20190603 193915 worker: MPD output 7 HTTP stream (off)
20190603 193915 worker: MPD crossfade (off)
20190603 193915 worker: Audio source (Local)
20190603 193915 worker: Output device (Local)
20190603 193915 worker: Airplay receiver started
20190603 193915 worker: UPnP renderer started
20190603 193915 worker: Bluetooth controller started
20190603 193932 worker: Bluetooth controller initialized
20190603 193932 worker: Bluetooth pairing agent started
20190603 193932 worker: - Music sources
20190603 193933 worker: USB sources (none attached)
20190603 193933 worker: NAS sources (none configured)
20190603 193933 worker: - Miscellaneous
20190603 193933 worker: Saved MPD vol level (0)
20190603 193933 worker: Preamp volume level (0)
20190603 193933 worker: MPD volume level (0) restored
20190603 193933 worker: ALSA volume level (0%)
20190603 193933 worker: Auto-play is off
20190603 193933 worker: Maintenance interval (21600)
20190603 193933 worker: Screen saver activation (Never)
20190603 193933 worker: Watchdog started
20190603 193934 worker: Ready
pi@rp7:~ $

Is the network configuration you mentioned "The one device that I have plugged into the wall (Ethernet)" some type of Power line WiFi device? If so then it's not something I'm able to test.

-Tim
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#17
(06-03-2019, 11:48 PM)Tim Curtis Wrote: I'm not seeing any issues with my 0W and fresh 5.3 image. Below is the moOde log.

Code:
pi@rp7:~ $ moodeutl -l
20190603 193903 worker: - Start
20190603 193903 worker: Successfully daemonized
20190603 193903 worker: Integrity check (passed)
20190603 193905 worker: ALSA volume set to (0%)
20190603 193905 worker: Session loaded
20190603 193905 worker: Debug logging (off)
20190603 193905 worker: - Platform
20190603 193909 worker: Rel  (Moode 5.3 2019-05-30)
20190603 193909 worker: Upd  (None)
20190603 193909 worker: Rasp (9.9)
20190603 193909 worker: Kern (4.19.46+)
20190603 193909 worker: MPD  (0.20.23)
20190603 193909 worker: Host (rp7)
20190603 193909 worker: Hdwr (Pi-Zero W 512MB v1.1)
20190603 193909 worker: Arch (armv6l)
20190603 193909 worker: Gov  (performance)
20190603 193909 worker: USB boot not enabled yet
20190603 193909 worker: File system not expanded yet
20190603 193909 worker: HDMI port on
20190603 193910 worker: File check ok
20190603 193910 worker: - Network
20190603 193910 worker: eth0 does not exist
20190603 193910 worker: eth0 address not assigned
20190603 193911 worker: wlan0 exists
20190603 193911 worker: wifi country (US)
20190603 193911 worker: wlan0 trying SSID (AirnetN2)
20190603 193911 worker: wlan0 (192.168.1.196)
20190603 193911 worker: - Audio
20190603 193912 worker: ALSA outputs unmuted
20190603 193912 worker: ALSA card number (0)
20190603 193912 worker: Audio output (I2S audio device)
20190603 193912 worker: Audio device (IQaudIO Pi-DACZero)
20190603 193912 worker: ALSA mixer name (Digital)
20190603 193912 worker: MPD volume control (hardware)
20190603 193912 worker: Hdwr volume controller exists
20190603 193912 worker: Chip options (Burr Brown PCM5122)
20190603 193912 worker: - Services
20190603 193912 worker: Reset renderer active state
20190603 193913 worker: MPD conf updated
20190603 193913 worker: MPD started
20190603 193914 worker: MPD accepting connections
20190603 193914 worker: Configure MPD outputs
20190603 193915 worker: MPD output 1 ALSA default (on)
20190603 193915 worker: MPD output 2 ALSA crossfeed (off)
20190603 193915 worker: MPD output 3 ALSA parametric eq (off)
20190603 193915 worker: MPD output 4 ALSA graphic eq (off)
20190603 193915 worker: MPD output 5 ALSA polarity inversion (off)
20190603 193915 worker: MPD output 6 ALSA bluetooth (off)
20190603 193915 worker: MPD output 7 HTTP stream (off)
20190603 193915 worker: MPD crossfade (off)
20190603 193915 worker: Audio source (Local)
20190603 193915 worker: Output device (Local)
20190603 193915 worker: Airplay receiver started
20190603 193915 worker: UPnP renderer started
20190603 193915 worker: Bluetooth controller started
20190603 193932 worker: Bluetooth controller initialized
20190603 193932 worker: Bluetooth pairing agent started
20190603 193932 worker: - Music sources
20190603 193933 worker: USB sources (none attached)
20190603 193933 worker: NAS sources (none configured)
20190603 193933 worker: - Miscellaneous
20190603 193933 worker: Saved MPD vol level (0)
20190603 193933 worker: Preamp volume level (0)
20190603 193933 worker: MPD volume level (0) restored
20190603 193933 worker: ALSA volume level (0%)
20190603 193933 worker: Auto-play is off
20190603 193933 worker: Maintenance interval (21600)
20190603 193933 worker: Screen saver activation (Never)
20190603 193933 worker: Watchdog started
20190603 193934 worker: Ready
pi@rp7:~ $

Is the network configuration you mentioned "The one device that I have plugged into the wall (Ethernet)" some type of Power line WiFi device? If so then it's not something I'm able to test.

-Tim


Leave that 0W online for a bit and see if the wifi dies.  It normally lasts around 5-10 minutes and then I no long have access to the device.

The RPI that's plugged into the wall, sorry, it's a home run to my closet switch.

So, it's weird this started w/the change to 5.2.  I've literally changed nothing on this network in months, AND, these devices on the 4.x build have been stable and reliable.

Ideas?
Reply
#18
My problem was resolved, because field of ssid can't be empty. If this field is empty then wifi working as AP. I was write any data and save it. Next i was edit my file/etc/wpa_supplicant/wpa_supplicant.conf  and i was change data to my real. Now all working

I have another problem, because i don't delete any entries for radio. I was manually delete pics od radioi stations and stations, but i non stop see all station without links ! I can't delete entries of radio station. I have info abiut succesful deletion, and when i refresh my all station (with deleted) displayed non stop


Resolved - refresh any databases and mpd.
Reply


Forum Jump: