Posts: 2
Threads: 1
Joined: Jun 2019
Reputation:
0
Hi there.
I have a problem with volume settings after connection a bluetooth device.
When i connect a device with bluetooth the volume is set to 100% automatically. This happens to me on Android and Win10. Is there a way to prevent this from happening within Moode? Like set a start volume after a device connects.
I already have experienced two almost heart attacks because of this issue.. Pff..
Posts: 12,038
Threads: 272
Joined: Mar 2018
Reputation:
459
If the audio device has a hardware volume controller it is set to 0dB (100%) whenever Airplay, Bluetooth, Spotify, Squeezelite connection is made. This is done because the client Player (iTunes, Spotify, LMS, Youtube etc) is controlling volume.
When the connection is subsequently terminated normal moOde volume is restored.
Try to describe your usage scenario where 0dB is not the correct configuration.
-Tim
Posts: 2
Threads: 1
Joined: Jun 2019
Reputation:
0
06-07-2019, 09:35 PM
(This post was last modified: 06-07-2019, 09:40 PM by spaceinvader.)
Hi Tim, thank you for replying and thanks for your great software!
Some more info here:
I'm using a HDWR REV= Pi-3B 1GB v1.2 with Audio device= HiFiBerry DAC+. Moode: moOde 5.3 2019-05-30
freshly installed on microsd.
Scenario:
I pair my samsung galaxy s7 phone to moode. when pairing is succesfull the volume on my phone for bluetooth audio is set to 100% immediately. I dont understand why the volume is set to 100% without touching my phone. Is this a Android thing or Moode? All other volumes levels on my phone are normal.
For spotify i can set a initial volume in the Spotify Config page within moode. Can this be added for bluetooth too as a limiter?
Posts: 12,038
Threads: 272
Joined: Mar 2018
Reputation:
459
I don't have any Android devices to test but for sure I've never seen this occur on my IOS devices. AFAIK there is no option in the Bluetooth stack for setting an initial volume on the client.
You mention that other volumes on the device are are OK so which specific volume gets set to 100%?
-Tim
Posts: 12,038
Threads: 272
Joined: Mar 2018
Reputation:
459
The on-board Pi audio has hardware volume but this issue is about volume being set to 100% on the client. I've never seen this on any of my IOS devices and you mentioned that you don't see this on your Android devices. I'd conclude that this issue is unique to certain Android devices.