03-22-2021, 03:09 PM
Hi officialsm
Thank you for posting the results of the commands. Everything appears to be configured correctly. The loopback device appears to be setup correctly, the ALSA configuration file looks fine.
There is, however, one strange result, which is that Moode is saying that your volume is 0
I wonder if no bars are showing because the audio level is too low when the audio copy is made. Could you try to adjust your volume so that Moode reports a value for it, and see if this helps with the spectrum bars.
Adrian.
Thank you for posting the results of the commands. Everything appears to be configured correctly. The loopback device appears to be setup correctly, the ALSA configuration file looks fine.
There is, however, one strange result, which is that Moode is saying that your volume is 0
Code:
pi@Simoode-audio:~ $ cat /var/local/www/currentsong.txt
file=http://strm112.1.fm/blues_mobile_mp3
artist=Radio station
album=1.FM - Blues Radio
title=George ''Wild Child'' Butler - Wedding Ring Blues
coverurl=imagesw/radio-logos/1.FM - Blues Radio.jpg
track=
date=
composer=
encoded=VBR
bitrate=192 kbps
outrate=32 bit, 44.1 kHz, Stereo, 2.822 Mbps
volume=0
mute=0
state=playI wonder if no bars are showing because the audio level is too low when the audio copy is made. Could you try to adjust your volume so that Moode reports a value for it, and see if this helps with the spectrum bars.
Adrian.
