08-26-2021, 11:29 AM
Hi Jempie
Then go to the SPI section of the mpd_oled installation instructions for Moode and click on "wired like this", and bear in mind that SDA=MOSI and SCL=CLK and these pins should be connected according to the SPI wiring diagram (don't connect them to GPIO 2 and 3).
Adrian.
Then go to the SPI section of the mpd_oled installation instructions for Moode and click on "wired like this", and bear in mind that SDA=MOSI and SCL=CLK and these pins should be connected according to the SPI wiring diagram (don't connect them to GPIO 2 and 3).
Adrian.