01-13-2022, 01:53 PM
(01-07-2022, 02:11 PM)adrii Wrote: Hi lhkp0480
In that case, the issue may be
https://github.com/antiprism/mpd_oled/issues/3
If the scroll is being triggered often then the reset won't stabilise the image.
You could review whether all your connections are good, try using shorter wires (e.g. 10 cm) and try running the I2C bus slower (dtparam=i2c_arm_baudrate=200000) to see if this helps.
Adrian.
I've try with shorter (20cm->10cm) jumper wire and re-install from step 1 then it work. Many thank for guiding and don't know why the wire length contribute too much.