09-20-2022, 10:31 PM
Hi Adrian, hi all,
following numerous tests I noticed that, using "mpd_oled" and then "cava" and "alsa", "via loopback", the output sample rate does not vary (with respect to the variation of the input) from that of the first track after the reboot.
It should also be noted that with "loopback" enabled, the load of the MPD process (monitored by TOP) continuously increases until it reaches saturation.
I can provide details of both series of tests carried out.
If you think it is better, we could analyze these two issues separately and, if desired, on the respective GITHUBs.
Best regards and thanks,
Francesco
following numerous tests I noticed that, using "mpd_oled" and then "cava" and "alsa", "via loopback", the output sample rate does not vary (with respect to the variation of the input) from that of the first track after the reboot.
It should also be noted that with "loopback" enabled, the load of the MPD process (monitored by TOP) continuously increases until it reaches saturation.
I can provide details of both series of tests carried out.
If you think it is better, we could analyze these two issues separately and, if desired, on the respective GITHUBs.
Best regards and thanks,
Francesco
