(12-01-2019, 03:59 PM)Tim Curtis Wrote:(12-01-2019, 01:20 PM)sjoerdju Wrote:(11-30-2019, 08:54 PM)Tim Curtis Wrote:(11-30-2019, 08:38 PM)sjoerdju Wrote: Hi Tim,
Thnx for the update, everything works fine except the maximum volume setting, it keeps putting it to 100% unfortunately. Double-checked it in alsamixer, still says 100.
Let me know if I can be of any help!
You can confirm the setting by the command below
Code:pi@rp3:~ $ sqlite3 /var/local/www/db/moode-sqlite3.db "select * from cfg_system where id='34'"
34|alsavolume_max|80
Here's the help text for the feature
Code:Establishes ALSA volume level that is used to set 0dB when MPD volume control is set to Software or Disabled, or when any of the Audio Renderers are active.
Whats your config?
- MPD volume = Software or Disabled?
- Renderer active?
pi@thequeensb:~ $ sqlite3 /var/local/www/db/moode-sqlite3.db "select * from cfg_system where id='34'"
34|alsavolume_max|87
It goes to 100 when using the Spotify Renderer / Librespot.
- MPD = Hardware (Hifiberry AMP).
Thnx!
Hi,
What is the output from the command below?
Code:sqlite3 /var/local/www/db/moode-sqlite3.db "select value from cfg_system where param='alsavolume_max' or param='alsavolume' or param='amixname' or param='mpdmixer' or param='rsmafterspot' or param='inpactive'"
-Tim
pi@thequeensb:~ $ sqlite3 /var/local/www/db/moode-sqlite3.db "select value from cfg_system where param='alsavolume_max' or param='alsavolume' or param='amixname' or param='mpdmixer' or param='rsmafterspot' or param='inpactive'"
87
0
Master
hardware
No
0
And also (to be complete):
pi@thequeensb:~ $ amixer
Simple mixer control 'Master',0
Capabilities: volume volume-joined
Playback channels: Mono
Capture channels: Mono
Limits: 0 - 248
Mono: 248 [100%]
Simple mixer control 'Channels',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 248
Front Left: 173 [70%]
Front Right: 173 [70%]
I put the Channels on 70% manually (to reduce the distortion).