[How to do instruction] Use hardware momentary switches to control moOde

[Britracer]

On my way out the door to a robotics competition but at a glance your playlist name BBC>R3 looks suspect. In a bash shell script,

Code:

mpc load BBC>R3

 says load file BBC and redirect the output of the command to file R3.

If BBC>R3 is really the playlist name, try putting it in quotes.

Regards,
Kent

Thank you - stupid error
Changed the Playlist names to remove the > and all is good

Next task is to work out how I can get inputs from the 8 presets and drive the 8 indicator LEDs and I don't have enough GPIOs - using my old RPI B.  after the DAC and the OLED I will only have maybe 9 GPIO left
Thought about using a binary encoder to get the 8 presets into 3 bits, then a decoder to get the status back out to the LEDs

Thanks again