Thank you for your donation!


Cloudsmith graciously provides open-source package management and distribution for our project.


How to limit the sample rate to 24bit 96kHz?
#1
Dear Tim Curtis
I just installed Moode on my Pi 3B+ and everything is great. Thank you for that.
But I have a problem.

I use m2tech hiface two to convert signal from usb output on Pi to coaxial input on the dac . This device support signal at maximum 24 bit, 96kHz. So when I play file that 192kHz, no sound output on my system. 

I only want to resample to 96khz when play file that is higher than 96khz but I don’t want to resample for file that less than 96khz.

What should I config to solve the problem?

Best Regards,
Hai.
Reply
#2
What you are proposing would need to be an option that MPD itself provides. You could try searching the MPD issue list to see if someone has requested something like this before or you could submit a new issue.
https://github.com/MusicPlayerDaemon/MPD...ample+rate
Enjoy the Music!
moodeaudio.org | Mastodon Feed | GitHub
Reply
#3
(03-28-2020, 02:44 PM)Tim Curtis Wrote: What you are proposing would need to be an option that MPD itself provides. You could try searching the MPD issue list to see if someone has requested something like this before or you could submit a new issue.
https://github.com/MusicPlayerDaemon/MPD...ample+rate

Thank you so much for you guidance. I am asking MPD's author about this option.
Reply


Forum Jump: