Thank you for your donation!


Official moOde 7.1.0 support thread
Quote:Today, I did the following:

Turned On RPI4
Check the Library and all RAID music was there.
Connected RAID.
Now I can see all the music in Library, but no track is recognized if I try to play.

I was looking at configure "Library" without do a simple thing and returned to Library and the following message appear, but I can search folders and tracks of RAID in the Library (I added an attachment with an image capure:

MPD error

Failed to open "ALSA Default (alsa); 
Failed to open ALSA device "hw:2,0": No such file or directory

You're starting MoOde before you start your NAS/RAID ? would explain the error message. If you are then go to the library tab and select 'Remount Sources' and Yes then check that the green tick appears.

Best if you power on your NAS/RAID before powering on your Pi.

If this does not appear to be the problem/solution then what kernel are you using ? 32 or 64 bit ?  as the experimental 64 bit kernel is known to give library misbehaviour  so revert to the 32 bit kernel.

Reply
@DRONE7  @TheOldPresbyope @Tim Curtis

Thank you for your support, it's taking to much time for me and I have to reasume my job.
By now is time to use my Bryston BDP, I'll try again in the future.
Is a great project and all of you are doing a fantastic Music Player.
All the best.
Reply
I don’t get any cover art on the web UI. I’m sending from Jriver UPNP and everything sounds great but I thought 7.1 was supposed to fix this. Cover art worked in 6.7.1.

Configuration issues?

Thanks
Reply
I think it may be a bug.

What is the output of the command below?

Code:
/var/www/command/upnp_albumart.py
Reply
(04-06-2021, 01:16 PM)Tim Curtis Wrote: I think it may be a bug.

What is the output of the command below?

Code:
/var/www/command/upnp_albumart.py
pi@moode:~ $ /var/www/command/upnp_albumart.py
Traceback (most recent call last):
  File "/var/www/command/upnp_albumart.py", line 49, in <module>
    usage()
  File "/var/www/command/upnp_albumart.py", line 17, in usage
    debug("Usage: %s devname" % prog)
NameError: name 'debug' is not defined
Reply
(04-06-2021, 01:48 PM)Botte Wrote:
(04-06-2021, 01:16 PM)Tim Curtis Wrote: I think it may be a bug.

What is the output of the command below?

Code:
/var/www/command/upnp_albumart.py
pi@moode:~ $ /var/www/command/upnp_albumart.py
Traceback (most recent call last):
  File "/var/www/command/upnp_albumart.py", line 49, in <module>
    usage()
  File "/var/www/command/upnp_albumart.py", line 17, in usage
    debug("Usage: %s devname" % prog)
NameError: name 'debug' is not defined

@Tim Curtis

I just tuned in. I'm seeing this same error response on both 7.1.0 and 7.2.0TR2.

Regards,
Kent
Reply
(04-05-2021, 05:34 PM)Botte Wrote: I don’t get any cover art on the web UI. I’m sending from Jriver UPNP and everything sounds great but I thought 7.1 was supposed to fix this. Cover art worked in 6.7.1.

Configuration issues?

Thanks

If you wouldn't mind.

1. Start a UPnP track playing in moOde
2. Run the command below and post the output. It should print the URL of the cover art image.

Code:
sudo /var/www/command/upnp_albumart.py "Moode UPNP"

Replace "Moode UPNP" with whatever name you used if its different.
Reply
(04-06-2021, 02:12 PM)Tim Curtis Wrote:
(04-05-2021, 05:34 PM)Botte Wrote: I don’t get any cover art on the web UI. I’m sending from Jriver UPNP and everything sounds great but I thought 7.1 was supposed to fix this. Cover art worked in 6.7.1.

Configuration issues?

Thanks

If you wouldn't mind.

1. Start a UPnP track playing in moOde
2. Run the command below and post the output. It should print the URL of the cover art image.

Code:
sudo /var/www/command/upnp_albumart.py "Moode UPNP"

Replace "Moode UPNP" with whatever name you used if its different.
pi@moode:~ $ sudo /var/www/command/upnp_albumart.py "Moode UPNP"
pi@moode:~ $ sudo /var/www/command/upnp_albumart.py "Moode UPNP-UPnP/AV"
http://10.0.0.99:52100/AArl/48161.jpg, http://10.0.0.99:52100/AArm/48161.jpg, http://10.0.0.99:52100/AArs/48161.jpg, http://10.0.0.99:52100/AArt/48161.jpg

First with the way the renderer is in the name box, then with what it shows up like in the server.
Reply
@Botte

Nice debugging. We independently arrived at the same answer at the same time. Your's here and my nearly identical analysis to the testing group thread.

Regards,
Kent
Reply
1. Which one do you connect to from the control point, "Moode UPNP" or "Moode UPNP-UPnP/AV"?
2. Are both Open home and A/V services on in moOde UPnP Config?
Reply


Forum Jump: